홈가공 및 절삭
Beyond™ Evolution™
여러 방향으로 회전이 가능한 새로운 단면 홈가공 및 절삭 공구입니다. Beyond™ Evolution™의 최신 트리플-V 시팅 기능은 기능 안정성을 높이고 진동을 최소화합니다.
V-백 디자인
뛰어난 홈가공 및 절삭 공구로써 여러 방향으로 회전이 가능하므로 하중 안정성이 우수합니다.
탑앤바텀-V
정확하고 안전한 인서트 포지셔닝 덕분에 강성과 치수 정확도가 향상됩니다.
[an error occurred while processing this directive]
404 오류 - 페이지를 찾을 수 없습니다!
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Beyond™ Evolution™
Read More
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (395)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(395)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(395)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(395)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(395)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(395)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(395)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(395)
- M Stainless Steel (347)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(347)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(347)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(347)
- K Cast Iron (395)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(395)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(395)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(395)
- N Non-Ferrous Materials (356)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (347)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (356)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(347)
- N6Carbon, Graphite Composites, CFRP (347)
- N1Wrought Aluminum (356)
- S High-Temp Alloys (356)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(356)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(356)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(356)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(356)
- H Hardened Materials (310)
- H1Hardened Materials 44-48 HRC(310)
- H2Hardened Materials 48-55 HRC(310)
Select First Choice
- BR (8)
- CN (69)
- DE (69)
- GB (40)
- IN (3)
- SG (26)
- US (102)
Applications
Applications
Back Boring (162)
Boring (162)
CRT Profiling (2)
Cut-Off (213)
Deep Grooving (2)
Face Grooving (162)
Facing (162)
Grooving (424)
ID Facing (162)
ID Grooving (230)
Multiple Direction Cutting (56)
Plunge Turning (206)
Turning (202)
Cutting Condition Material
Cutting Condition Material
- H-All (310)
- K-All (404)
- M-All (356)
- N-All (365)
- P-All (404)
- S-All (365)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (289)
- Lightly Interrupted Cut (369)
- Smooth Cut (404)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (242)
to
Connection Style
Connection Style
- Boring Bar Shank (52)
- Toolholder (148)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (362)
to
Over All Length [L]
Over All Length [L]
- 1.88 in(10)
- 1.954 in(4)
- 2.037 in(8)
- 2.273 in(4)
- 2.347 in(4)
- 2.4309 in(2)
- 2.431 in(4)
- 2.583 in(2)
- 2.667 in(4)
- 4.5 in(24)
- 4.921 in(32)
- 5.3267 in(2)
- 5.3486 in(2)
- 5.372 in(4)
- 5.3939 in(4)
- 5.463 in(2)
- 5.508 in(6)
- 5.906 in(42)
- 5.915 in(2)
- 5.961 in(6)
- 6.0 in(52)
- 6.1141 in(2)
- 6.136 in(2)
- 6.25 in(2)
- 6.3721 in(2)
- 6.3939 in(2)
- 6.693 in(22)
- 6.703 in(2)
- 7.0 in(10)
- 7.087 in(12)
- 7.874 in(18)
- 9.843 in(8)
to
Over All Length [L]
Over All Length [L]
- 47.75 mm(10)
- 49.62 mm(4)
- 51.75 mm(8)
- 57.75 mm(4)
- 59.62 mm(4)
- 61.746 mm(2)
- 61.75 mm(4)
- 65.62 mm(2)
- 67.75 mm(4)
- 114.3 mm(24)
- 125.0 mm(32)
- 135.299 mm(2)
- 135.855 mm(2)
- 136.449 mm(4)
- 137.004 mm(4)
- 138.75 mm(2)
- 139.9 mm(6)
- 150.0 mm(42)
- 150.25 mm(2)
- 151.4 mm(6)
- 152.4 mm(52)
- 155.299 mm(2)
- 155.855 mm(2)
- 158.75 mm(2)
- 161.852 mm(2)
- 162.404 mm(2)
- 170.0 mm(22)
- 170.25 mm(2)
- 177.8 mm(10)
- 180.0 mm(12)
- 200.0 mm(18)
- 250.0 mm(8)
to
Corner Radius
Corner Radius
- 0.008 in(149)
- 0.012 in(66)
- 0.016 in(168)
- 0.031 in(129)
- 0.039 in(55)
- 0.041 in(61)
- 0.046 in(20)
- 0.047 in(86)
- 0.059 in(44)
- 0.061 in(51)
- 0.063 in(48)
- 0.065 in(49)
- 0.079 in(46)
- 0.081 in(53)
- 0.094 in(50)
- 0.096 in(52)
- 0.098 in(36)
- 0.1 in(43)
- 0.118 in(38)
- 0.12 in(45)
- 0.125 in(44)
- 0.128 in(40)
- 0.156 in(29)
- 0.157 in(24)
- 0.158 in(27)
- 0.159 in(31)
to
Corner Radius
Corner Radius
- 0.2 mm(149)
- 0.3 mm(66)
- 0.4 mm(168)
- 0.8 mm(129)
- 1.0 mm(55)
- 1.05 mm(61)
- 1.175 mm(20)
- 1.2 mm(86)
- 1.5 mm(44)
- 1.55 mm(51)
- 1.6 mm(48)
- 1.65 mm(49)
- 2.0 mm(46)
- 2.05 mm(53)
- 2.375 mm(50)
- 2.45 mm(52)
- 2.5 mm(36)
- 2.55 mm(43)
- 3.0 mm(38)
- 3.05 mm(45)
- 3.175 mm(44)
- 3.25 mm(40)
- 3.95 mm(29)
- 4.0 mm(24)
- 4.025 mm(27)
- 4.05 mm(31)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(204)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(204)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (251)
- KCK20B (251)
- KCM35B (166)
- KCP10B (259)
- KCP25B (264)
- KCU10 (276)
- KCU10B (276)
- KCU25 (279)
- KCU25B (242)
Hand Of Tool
Hand Of Tool
- L (100)
- R (100)
Wiper Insert
Wiper Insert
- N (362)
Drilling Condition Material
Drilling Condition Material
- H-All (68)
- K-All (162)
- M-All (114)
- N-All (123)
- P-All (162)
- S-All (123)
F Dimension
F Dimension
- 8.52 mm(4)
- 9.0 mm(4)
- 11.0 mm(5)
- 11.06 mm(7)
- 13.0 mm(6)
- 13.94 mm(2)
- 13.97 mm(4)
- 17.0 mm(4)
- 17.3 mm(6)
- 17.5 mm(2)
- 19.08 mm(8)
- 19.13 mm(12)
- 19.23 mm(4)
- 20.06 mm(8)
- 20.11 mm(12)
- 20.21 mm(4)
- 21.13 mm(4)
- 22.0 mm(4)
- 25.06 mm(8)
- 25.11 mm(12)
- 25.21 mm(4)
- 25.34 mm(2)
- 25.43 mm(8)
- 25.48 mm(12)
- 25.58 mm(4)
- 25.71 mm(2)
- 31.83 mm(8)
- 31.93 mm(4)
- 32.06 mm(4)
- 32.08 mm(8)
- 32.18 mm(4)
- 32.31 mm(4)
- 32.41 mm(2)
- 32.66 mm(2)
- 38.28 mm(2)
- 38.41 mm(2)
- 38.76 mm(2)
- 40.18 mm(2)
- 40.31 mm(2)
- 40.66 mm(2)
to
F Dimension
F Dimension
- 0.336 in(4)
- 0.354 in(4)
- 0.433 in(5)
- 0.436 in(7)
- 0.512 in(6)
- 0.549 in(2)
- 0.55 in(4)
- 0.669 in(4)
- 0.681 in(6)
- 0.689 in(2)
- 0.751 in(8)
- 0.753 in(12)
- 0.757 in(4)
- 0.79 in(8)
- 0.792 in(12)
- 0.796 in(4)
- 0.832 in(4)
- 0.866 in(4)
- 0.987 in(8)
- 0.989 in(12)
- 0.993 in(4)
- 0.997 in(2)
- 1.001 in(8)
- 1.003 in(12)
- 1.007 in(4)
- 1.012 in(2)
- 1.253 in(8)
- 1.257 in(4)
- 1.262 in(4)
- 1.263 in(8)
- 1.267 in(4)
- 1.272 in(4)
- 1.276 in(2)
- 1.286 in(2)
- 1.507 in(2)
- 1.512 in(2)
- 1.526 in(2)
- 1.582 in(2)
- 1.587 in(2)
- 1.601 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 15.88 mm(4)
- 16.0 mm(4)
- 20.0 mm(12)
- 25.0 mm(10)
- 25.4 mm(2)
- 31.75 mm(6)
- 32.0 mm(6)
- 38.1 mm(4)
- 40.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.625 in(4)
- 0.63 in(4)
- 0.787 in(12)
- 0.984 in(10)
- 1.0 in(2)
- 1.25 in(6)
- 1.26 in(6)
- 1.5 in(4)
- 1.575 in(4)
to
Countersunk Angle
Countersunk Angle
- 17.5 (2)
to
Cutting Direction
Cutting Direction
- E (169)
- S (31)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (34)
- NEUTRAL (ZERO) (18)
- POSITIVE-ZERO (40)
Maximum Bore Depth
Maximum Bore Depth
- 0.945 in(4)
- 1.0 in(4)
- 1.25 in(6)
- 1.259 in(2)
- 1.26 in(2)
- 1.5 in(6)
- 1.575 in(4)
- 1.586 in(2)
- 1.59 in(2)
- 1.969 in(2)
- 1.98 in(4)
- 2.0 in(7)
- 2.496 in(2)
- 2.5 in(1)
- 2.519 in(1)
- 2.52 in(3)
to
Maximum Bore Depth
Maximum Bore Depth
- 24.0 mm(4)
- 25.4 mm(4)
- 31.75 mm(6)
- 32.0 mm(4)
- 38.1 mm(6)
- 40.0 mm(4)
- 40.28 mm(2)
- 40.3 mm(2)
- 50.0 mm(2)
- 50.3 mm(4)
- 50.8 mm(7)
- 63.4 mm(2)
- 63.5 mm(1)
- 64.0 mm(3)
- 64.01 mm(1)
to
Boring Bar Material
Boring Bar Material
- S (52)
frontEnd
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (76)
Clamp Style
Clamp Style
- Y (218)
Cutting Width
Cutting Width
- 0.063 in(14)
- 0.0787 in(52)
- 0.0788 in(52)
- 0.079 in(55)
- 0.083 in(57)
- 0.084 in(56)
- 0.094 in(58)
- 0.099 in(52)
- 0.118 in(44)
- 0.1181 in(40)
- 0.123 in(51)
- 0.125 in(48)
- 0.13 in(49)
- 0.157 in(46)
- 0.1574 in(42)
- 0.1575 in(42)
- 0.158 in(42)
- 0.161 in(41)
- 0.162 in(53)
- 0.187 in(50)
- 0.1875 in(42)
- 0.192 in(52)
- 0.1968 in(32)
- 0.197 in(36)
- 0.202 in(43)
- 0.236 in(38)
- 0.2362 in(34)
- 0.241 in(45)
- 0.25 in(44)
- 0.255 in(40)
- 0.276 in(34)
- 0.281 in(34)
- 0.2881 in(35)
- 0.312 in(29)
- 0.315 in(24)
- 0.317 in(27)
- 0.3199 in(20)
- 0.32 in(31)
- 0.375 in(8)
- 0.38 in(8)
- 0.394 in(8)
- 0.399 in(8)
to
Cutting Width
Cutting Width
- 1.6 mm(14)
- 2.0 mm(55)
- 2.12 mm(61)
- 2.125 mm(52)
- 2.387 mm(58)
- 2.388 mm(52)
- 2.51 mm(52)
- 2.511 mm(52)
- 3.0 mm(44)
- 3.125 mm(51)
- 3.175 mm(44)
- 3.177 mm(44)
- 3.3 mm(44)
- 3.301 mm(40)
- 3.302 mm(45)
- 4.0 mm(46)
- 4.094 mm(41)
- 4.125 mm(53)
- 4.75 mm(46)
- 4.76 mm(42)
- 4.762 mm(46)
- 4.763 mm(42)
- 4.873 mm(47)
- 4.877 mm(42)
- 4.878 mm(47)
- 5.0 mm(36)
- 5.125 mm(43)
- 6.0 mm(38)
- 6.125 mm(45)
- 6.346 mm(40)
- 6.35 mm(38)
- 6.473 mm(36)
- 6.477 mm(34)
- 6.478 mm(38)
- 7.0 mm(34)
- 7.125 mm(34)
- 7.317 mm(35)
- 7.92 mm(24)
- 7.925 mm(25)
- 8.0 mm(24)
- 8.051 mm(20)
- 8.052 mm(27)
- 8.125 mm(31)
- 9.525 mm(8)
- 9.651 mm(8)
- 10.0 mm(8)
- 10.125 mm(8)
to
Front End Type
Front End Type
- MCS - Modular Cartridge System (76)
Insert Shape
Insert Shape
- PRISMATIC (404)
Cartridge Size
Cartridge Size
- 50 (32)
- 65 (10)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (76)
Insert Size
Insert Size
- 10 (8)
- 1F (12)
- 2 (48)
- 3 (32)
- 4 (32)
- 5 (24)
- 6 (28)
- 8 (16)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.197 in(8)
- 0.276 in(24)
- 0.394 in(12)
- 0.472 in(14)
- 0.473 in(4)
- 0.63 in(60)
- 0.866 in(28)
- 1.0236 in(2)
- 1.024 in(52)
- 1.26 in(26)
- 1.575 in(12)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 5.0 mm(8)
- 7.0 mm(24)
- 10.0 mm(12)
- 12.0 mm(18)
- 16.0 mm(60)
- 22.0 mm(28)
- 26.0 mm(54)
- 32.0 mm(26)
- 40.0 mm(12)
to
Gage Length
Gage Length
- 1.1020 in(2)
- 1.2990 in(2)
- 1.4960 in(2)
- 1.6930 in(2)
- 1.8500 in(6)
- 1.8900 in(6)
- 1.9290 in(4)
- 2.1060 in(4)
- 2.1850 in(2)
- 2.2440 in(6)
- 2.2830 in(6)
- 2.3030 in(6)
- 2.3820 in(2)
- 2.5000 in(12)
- 2.5790 in(2)
- 2.6180 in(4)
- 2.6970 in(4)
- 2.8940 in(4)
- 5.4390 in(2)
- 5.4630 in(2)
- 5.4820 in(2)
- 5.5080 in(6)
- 5.5280 in(6)
- 5.5330 in(4)
- 5.9060 in(2)
- 6.0000 in(4)
- 6.2260 in(2)
- 6.2500 in(2)
- 6.2700 in(2)
- 6.5330 in(2)
- 6.6930 in(2)
- 7.0000 in(2)
Gage Length
Gage Length
- 28.0000 mm(2)
- 33.0000 mm(2)
- 38.0000 mm(2)
- 43.0000 mm(2)
- 47.0000 mm(6)
- 48.0000 mm(6)
- 49.0000 mm(4)
- 53.5000 mm(4)
- 55.5000 mm(2)
- 57.0000 mm(6)
- 58.0000 mm(6)
- 58.5000 mm(6)
- 60.5000 mm(2)
- 63.5000 mm(12)
- 65.5000 mm(2)
- 66.5000 mm(4)
- 68.5000 mm(4)
- 73.5000 mm(4)
- 138.1500 mm(2)
- 138.7500 mm(2)
- 139.2500 mm(2)
- 139.9000 mm(6)
- 140.4000 mm(6)
- 140.5500 mm(4)
- 150.0000 mm(2)
- 152.4000 mm(4)
- 158.1500 mm(2)
- 158.7500 mm(2)
- 159.2500 mm(2)
- 165.9500 mm(2)
- 170.0000 mm(2)
- 177.8000 mm(2)
insertGeometry
Shape
Shape
- PRISMATIC (190)
Insert Seat Size
Insert Seat Size
- 2 (21)
- 3 (39)
- 4 (38)
- 5 (18)
- 6 (38)
- 8 (36)
Cutting Edge Length
Cutting Edge Length
- 0.252 mm(2)
- 0.419 mm(2)
to
Cutting Edge Length
Cutting Edge Length
- 6.392 in(2)
- 10.638 in(2)
to
Cutting Tool Material
Cutting Tool Material
- H W (404)
backEnd
Connection Type
Connection Type
- BORING BAR (52)
- SQUARE SHANK (148)
System Size
System Size
- KM40TS (4)
- KM4X63 (4)
- KM50TS (8)
- KM63TS (8)
- KM63XMZ (8)
- KM80ATC (8)
- KM80TS (8)
- PSC40 (4)
- PSC50 (8)
- PSC63 (8)
- PSC80 (8)
Back-End Diameter
Back-End Diameter
- 12.0 mm(4)
- 12.7 mm(4)
- 15.87 mm(4)
- 15.875 mm(2)
- 16.0 mm(6)
- 19.05 mm(6)
- 20.0 mm(6)
- 25.0 mm(6)
- 25.4 mm(6)
- 31.7 mm(1)
- 31.75 mm(3)
- 32.0 mm(4)
- 40.0 mm(8)
- 50.0 mm(16)
- 63.0 mm(28)
- 80.0 mm(24)
to
Back-End Diameter
Back-End Diameter
- 1.5748 in(4)
- 1.575 in(4)
- 1.9685 in(4)
- 1.969 in(8)
- 1.97 in(4)
- 2.48 in(26)
- 2.4803 in(2)
- 3.15 in(24)
to
Shank Height
Shank Height
- 0.75 in(24)
- 0.787 in(24)
- 0.984 in(24)
- 0.9843 in(2)
- 1.0 in(26)
- 1.25 in(18)
- 1.2598 in(18)
- 1.5 in(6)
- 1.5748 in(6)
to
Shank Height
Shank Height
- 19.05 mm(24)
- 20.0 mm(24)
- 25.0 mm(26)
- 25.4 mm(26)
- 31.75 mm(18)
- 32.0 mm(18)
- 38.1 mm(6)
- 40.0 mm(6)
to
Shank Width
Shank Width
- 0.75 in(24)
- 0.787 in(24)
- 0.984 in(24)
- 0.9843 in(2)
- 1.0 in(26)
- 1.25 in(18)
- 1.2598 in(18)
- 1.5 in(6)
- 1.5748 in(6)
to
Shank Width
Shank Width
- 19.05 mm(24)
- 20.0 mm(24)
- 25.0 mm(26)
- 25.4 mm(26)
- 31.75 mm(18)
- 32.0 mm(18)
- 38.1 mm(6)
- 40.0 mm(6)
to
other
Insert Hand
Insert Hand
- L (188)
- N (404)
- R (188)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
