[an error occurred while processing this directive]
404 오류 - 페이지를 찾을 수 없습니다!
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Kenloc™ • M 스타일 클램핑 • 네거티브 스타일 인서트용
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (460)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(460)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(460)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(460)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(460)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(460)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(460)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(460)
- M Stainless Steel (459)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(459)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(459)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(459)
- K Cast Iron (458)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(458)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(458)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(458)
- N Non-Ferrous Materials (442)
- N7MMC's (367)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(442)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (442)
- N6Carbon, Graphite Composites, CFRP (442)
- N3High-Silicon Aluminum Alloys Si >12.2%(202)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (442)
- N1Wrought Aluminum (442)
- S High-Temp Alloys (453)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(453)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(453)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(453)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(453)
- H Hardened Materials (416)
- H4Hardened Materials >60 HRC(218)
- H1Hardened Materials 44-48 HRC(416)
- H2Hardened Materials 48-55 HRC(416)
- H3Hardened Materials 56-60 HRC(347)
- C CFRP Materials (442)
- C1CFRP, CFRP / CFRP (442)
- C2CFRP / Aluminium CFRP / Non-Ferrous (367)
Applications
Applications
Chamfer Turning (41)
Facing (295)
ID Facing (2)
Multiple Direction Cutting (296)
Plunge Turning (51)
Profiling (343)
TRN Boring (4)
Turning (450)
Cutting Condition Material
Cutting Condition Material
- H-All (347)
- K-All (451)
- K1 (105)
- M-All (424)
- N-All (331)
- P-All (458)
- S-All (407)
- S2 (343)
- S4 (119)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (456)
- Lightly Interrupted Cut (458)
- Smooth Cut (458)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (38)
- 50.0 (14)
- 60.0 (12)
- 62.5 (6)
- 63.0 (4)
- 72.5 (10)
- 75.0 (83)
- 90.0 (81)
- 93.0 (107)
- 95.0 (90)
- 107.5 (14)
- 117.5 (2)
to
Connection Style
Connection Style
- KM (20)
- Toolholder (437)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (36)
- 1.0 (207)
- 2.0 (262)
- 3.0 (100)
- 4.0 (318)
- 6.0 (117)
- 8.0 (234)
to
Over All Length [L]
Over All Length [L]
- 1.378 in(17)
- 1.5748 in(6)
- 1.575 in(1)
- 3.937 in(4)
- 4.0 in(10)
- 4.5 in(62)
- 4.921 in(15)
- 4.9213 in(3)
- 5.0 in(35)
- 5.5709 in(2)
- 5.9 in(1)
- 5.9055 in(8)
- 5.906 in(34)
- 6.0 in(183)
- 6.6929 in(14)
- 6.693 in(26)
- 6.7421 in(5)
- 6.7913 in(2)
- 7.0 in(24)
- 7.874 in(3)
- 8.0 in(5)
- 18.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 35.0 mm(17)
- 40.0 mm(7)
- 100.0 mm(4)
- 101.6 mm(10)
- 114.295 mm(1)
- 114.3 mm(61)
- 125.0 mm(18)
- 127.0 mm(35)
- 141.5 mm(2)
- 150.0 mm(45)
- 152.4 mm(181)
- 170.0 mm(40)
- 171.25 mm(5)
- 172.5 mm(2)
- 177.8 mm(24)
- 200.0 mm(3)
- 203.2 mm(5)
- 457.2 mm(1)
to
Corner Radius
Corner Radius
- 0.004 in(171)
- 0.008 in(191)
- 0.014 in(17)
- 0.016 in(338)
- 0.024 in(12)
- 0.031 in(428)
- -0.039 in(36)
- 0.047 in(423)
- 0.062 in(61)
- 0.063 in(352)
- 0.094 in(247)
- 0.125 in(36)
- 0.126 in(99)
- 0.157 in(22)
- 0.188 in(1)
- 0.25 in(14)
- 0.375 in(6)
- 0.5 in(2)
to
Corner Radius
Corner Radius
- 0.1 mm(171)
- 0.2 mm(191)
- 0.35 mm(17)
- 0.4 mm(338)
- 0.6 mm(12)
- 0.8 mm(428)
- -1.0 mm(36)
- 1.2 mm(423)
- 1.575 mm(61)
- 1.6 mm(352)
- 2.375 mm(62)
- 2.4 mm(223)
- 3.175 mm(36)
- 3.2 mm(99)
- 4.0 mm(22)
- 4.775 mm(1)
- 6.35 mm(14)
- 9.525 mm(6)
- 12.7 mm(2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (307)
- 241 (61)
- CL4 (201)
- CM2 (291)
- CM3 (244)
- CM4 (158)
- CPX (295)
- CW2 (115)
- CW2015 (22)
- CW5025 (22)
- GX (183)
- HK1500 (15)
- HT2 (91)
- HTX (98)
- K060 (153)
- K090 (401)
- K1 (163)
- K10M (346)
- K10P (346)
- K10U (271)
- K15U (267)
- K20K (385)
- K21 (220)
- K25M (312)
- K25P (346)
- K313 (415)
- K35P (217)
- K420 (342)
- K45 (223)
- K68 (413)
- KB1340 (105)
- KB1345 (122)
- KB1610 (199)
- KB1625 (187)
- KB1630 (156)
- KB5610 (131)
- KB5625 (187)
- KB5630 (119)
- KB9610 (216)
- KB9640 (131)
- KBH10 (216)
- KBH10B (173)
- KBH20 (216)
- KBH20B (173)
- KBK35 (61)
- KC210 (224)
- KC250 (246)
- KC5010 (456)
- KC5025 (400)
- KC5410 (355)
- KC5510 (390)
- KC5525 (188)
- KC710 (75)
- KC720 (310)
- KC722 (61)
- KC730 (395)
- KC7310 (398)
- KC732 (279)
- KC8050 (453)
- KC810 (419)
- KC850 (450)
- KC9010 (387)
- KC9025 (455)
- KC910 (412)
- KC9105 (353)
- KC9110 (460)
- KC9120 (437)
- KC9125 (458)
- KC9125RR (39)
- KC9140 (452)
- KC9145 (365)
- KC9210 (17)
- KC9215 (392)
- KC9225 (407)
- KC9240 (402)
- KC9240NEW (400)
- KC9245 (398)
- KC9315 (429)
- KC9320 (404)
- KC9325 (413)
- KC935 (449)
- KC950 (419)
- KC990 (456)
- KCD25 (24)
- KCK05 (406)
- KCK05B (349)
- KCK15 (399)
- KCK15B (407)
- KCK20 (404)
- KCK20B (401)
- KCM15 (393)
- KCM15B (371)
- KCM25 (400)
- KCM25B (387)
- KCM35 (372)
- KCM35B (268)
- KCP05 (308)
- KCP05B (277)
- KCP10 (458)
- KCP10B (443)
- KCP25 (458)
- KCP25B (442)
- KCP25C (456)
- KCP30 (452)
- KCP30B (347)
- KCP40 (360)
- KCP40B (409)
- KCPK05 (370)
- KCS10 (61)
- KCS10B (359)
- KCU10 (446)
- KCU10B (442)
- KCU25 (400)
- KCU25B (400)
- KD050 (223)
- KD081 (225)
- KD100 (134)
- KD120 (238)
- KD1400 (168)
- KD1405 (119)
- KD1425 (168)
- KM1 (187)
- KMF (61)
- KS15 (61)
- KT1120 (58)
- KT125 (240)
- KT150 (211)
- KT175 (255)
- KT315 (292)
- KT325 (128)
- KT5020 (71)
- KTP10 (243)
- KTP25S (185)
- KU10T (275)
- KU30T (429)
- KY1310 (210)
- KY1320 (330)
- KY1540 (185)
- KY1615 (357)
- KY2000 (224)
- KY2100 (116)
- KY3000 (359)
- KY3400 (316)
- KY3500 (354)
- KY4000 (155)
- KY4300 (147)
- KY4400 (328)
- KYHK15B (343)
- KYK10 (165)
- KYK25 (294)
- KYK35 (352)
- KYS25 (149)
- KYS30 (161)
- NL200 (78)
- NL250 (375)
- NL300 (296)
- NL400 (146)
- NL920 (232)
- P25 (128)
- PB100 (2)
- PB170 (2)
- PB250 (2)
- PB300 (2)
- PS5 (91)
- SP0819 (263)
- SP0A00 (1)
- SP3019 (261)
- SP4019 (236)
- SP4036 (34)
- SP4093 (34)
- SP61EJ (31)
- SPADAP (59)
- SPSREJ (16)
- THM (7)
- THM-X (9)
- THMF-X (5)
- TN10P (24)
- TN10U (24)
- TN15M (24)
- TN15U (24)
- TN2000 (15)
- TN20K (24)
- TN20P (24)
- TN30M (24)
- TN30P (18)
- TN4000 (15)
- TN5015 (17)
- TN5020 (15)
- TN5105 (18)
- TN5120 (18)
- TN6010 (17)
- TN6025 (13)
- TN7005 (13)
- TN7010 (18)
- TN7015 (18)
- TN7025 (18)
- TN7035 (50)
- TN7105 (12)
- TN7110 (18)
- TN7115 (18)
- TN7125 (15)
- TN7135 (15)
- TN8025 (18)
- TTI15 (8)
- TTM (2)
- TTM09 (5)
- TTR (5)
- TTS (11)
- TTX (12)
- WBH10C (20)
- WBH10P (11)
- WBH10U (16)
- WBH20P (22)
- WBH25P (14)
- WBH25U (14)
- WBH30P (11)
- WBK40U (3)
- WBK45U (13)
- WDN00U (5)
- WDN25U (15)
- WK05CT (24)
- WK15CT (13)
- WK20CT (24)
- WM15CT (24)
- WM25CT (24)
- WM35CT (24)
- WP05CT (4)
- WP15CT (24)
- WP25CT (24)
- WP35CT (24)
- WS10PT (24)
- WS25PT (24)
- WU10HT (24)
- WU10PT (19)
- WU25PT (19)
- X00511 (61)
- X00580 (61)
- X00581 (61)
- X00582 (61)
- X00583 (61)
- X00584 (61)
- X00585 (61)
- X00586 (61)
- X00591 (61)
- X00592 (61)
- X00593 (61)
- X00594 (61)
- X00596 (61)
- X00597 (61)
- X00599 (61)
Hand Of Tool
Hand Of Tool
- L (185)
- N (63)
- R (209)
Wiper Insert
Wiper Insert
- N (460)
- Y (126)
F Dimension
F Dimension
- 0.0 mm(3)
- 6.35 mm(2)
- 7.938 mm(1)
- 7.94 mm(1)
- 8.0 mm(1)
- 9.52 mm(1)
- 9.525 mm(5)
- 10.0 mm(4)
- 12.0 mm(5)
- 12.23 mm(1)
- 12.25 mm(1)
- 12.5 mm(7)
- 12.7 mm(16)
- 13.76 mm(1)
- 13.764 mm(1)
- 15.799 mm(1)
- 15.87 mm(1)
- 15.875 mm(9)
- 15.88 mm(2)
- 16.0 mm(1)
- 16.82 mm(1)
- 17.0 mm(2)
- 19.05 mm(10)
- 19.075 mm(2)
- 19.685 mm(1)
- 19.688 mm(1)
- 20.0 mm(4)
- 20.5 mm(1)
- 21.031 mm(2)
- 22.0 mm(20)
- 22.22 mm(2)
- 22.225 mm(4)
- 22.352 mm(2)
- 23.165 mm(5)
- 25.0 mm(11)
- 25.197 mm(2)
- 25.4 mm(46)
- 25.5 mm(1)
- 26.416 mm(1)
- 27.0 mm(6)
- 27.381 mm(2)
- 28.016 mm(2)
- 28.7 mm(2)
- 31.75 mm(81)
- 31.775 mm(6)
- 32.0 mm(51)
- 33.55 mm(2)
- 34.366 mm(2)
- 35.006 mm(1)
- 38.1 mm(49)
- 38.125 mm(3)
- 38.379 mm(2)
- 40.0 mm(10)
- 40.5 mm(8)
- 44.958 mm(1)
- 46.25 mm(3)
- 50.0 mm(2)
- 50.8 mm(37)
- 50.826 mm(1)
- 57.15 mm(1)
- 57.658 mm(1)
- 63.5 mm(2)
to
F Dimension
F Dimension
- 0.0 in(3)
- 0.25 in(2)
- 0.312 in(1)
- 0.3125 in(1)
- 0.315 in(1)
- 0.375 in(6)
- 0.394 in(4)
- 0.472 in(3)
- 0.4724 in(1)
- 0.473 in(1)
- 0.482 in(1)
- 0.4823 in(1)
- 0.492 in(6)
- 0.4921 in(1)
- 0.5 in(16)
- 0.542 in(2)
- 0.622 in(1)
- 0.625 in(12)
- 0.63 in(1)
- 0.662 in(1)
- 0.669 in(2)
- 0.75 in(10)
- 0.751 in(2)
- 0.775 in(2)
- 0.787 in(2)
- 0.7874 in(2)
- 0.807 in(1)
- 0.828 in(2)
- 0.866 in(10)
- 0.8661 in(10)
- 0.875 in(6)
- 0.88 in(2)
- 0.912 in(5)
- 0.984 in(9)
- 0.9843 in(2)
- 0.992 in(2)
- 1.0 in(46)
- 1.0039 in(1)
- 1.04 in(1)
- 1.063 in(6)
- 1.078 in(2)
- 1.103 in(2)
- 1.13 in(2)
- 1.25 in(81)
- 1.251 in(6)
- 1.2598 in(16)
- 1.26 in(33)
- 1.2698 in(1)
- 1.321 in(2)
- 1.353 in(2)
- 1.3782 in(1)
- 1.5 in(49)
- 1.501 in(3)
- 1.511 in(2)
- 1.5748 in(4)
- 1.575 in(6)
- 1.594 in(1)
- 1.5945 in(7)
- 1.77 in(1)
- 1.821 in(3)
- 1.9685 in(1)
- 1.969 in(1)
- 2.0 in(37)
- 2.001 in(1)
- 2.25 in(1)
- 2.27 in(1)
- 2.5 in(2)
- 126.0 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- -1.0 mm(36)
- 44.0 mm(2)
- 54.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- -1.0 in(36)
- 1.732 in(2)
- 2.126 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 in(36)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(36)
to
Cutting Direction
Cutting Direction
- B (96)
- E (71)
- S (290)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (385)
- NEGATIVE-ZERO (72)
Maximum Bore Depth
Maximum Bore Depth
- 1.378 in(4)
to
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(4)
to
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (134)
- D-DIAMOND/RHOMBIC 55 (63)
- R-ROUND (23)
- S-SQUARE 90 (75)
- T-TRIANGLE 60 (95)
- V-DIAMOND/RHOMBIC 35 (49)
- W-TRIGON 80 (22)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (283)
- B L (254)
- C A (413)
- C N (388)
- D P (200)
- H T (307)
- H W (460)
backEnd
Connection Type
Connection Type
- SQUARE SHANK (437)
- TAPER SHANK (20)
System Size
System Size
- KM32 (12)
- KM32TS (6)
- KM40TS (2)
Back-End Diameter
Back-End Diameter
- 32.0 mm(22)
- 40.0 mm(2)
to
Shank Height
Shank Height
- 0.5 in(9)
- 0.625 in(10)
- 0.6299 in(2)
- 0.63 in(2)
- 0.75 in(54)
- 0.784 in(1)
- 0.787 in(15)
- 0.7874 in(2)
- 0.984 in(37)
- 0.9843 in(10)
- 1.0 in(112)
- 1.25 in(82)
- 1.2598 in(21)
- 1.26 in(26)
- 1.5 in(48)
- 1.5748 in(1)
- 1.575 in(2)
- 2.0 in(3)
to
Shank Height
Shank Height
- 12.7 mm(9)
- 15.875 mm(7)
- 15.88 mm(3)
- 16.0 mm(4)
- 19.05 mm(54)
- 20.0 mm(18)
- 25.0 mm(47)
- 25.4 mm(112)
- 31.75 mm(82)
- 32.0 mm(47)
- 38.1 mm(48)
- 40.0 mm(3)
- 50.8 mm(3)
to
Shank Width
Shank Width
- 0.5 in(10)
- 0.625 in(10)
- 0.6299 in(2)
- 0.63 in(2)
- 0.75 in(55)
- 0.787 in(16)
- 0.7874 in(2)
- 0.984 in(51)
- 0.9843 in(18)
- 1.0 in(118)
- 1.25 in(74)
- 1.2598 in(12)
- 1.26 in(13)
- 1.5 in(48)
- 1.574 in(1)
- 1.5748 in(1)
- 1.575 in(1)
- 2.0 in(3)
to
Shank Width
Shank Width
- 12.7 mm(10)
- 15.875 mm(7)
- 15.88 mm(3)
- 16.0 mm(4)
- 19.05 mm(55)
- 20.0 mm(18)
- 25.0 mm(69)
- 25.4 mm(118)
- 31.75 mm(74)
- 32.0 mm(25)
- 38.1 mm(48)
- 40.0 mm(3)
- 50.8 mm(3)
to
other
Insert Hand
Insert Hand
- N (460)
- R (4)
No filters matching ""
