페이지를 찾을 수 없음
페이지를 찾을 수 없음
페이지를 찾을 수 없음
페이지를 찾을 수 없음
페이지를 찾을 수 없음
페이지를 찾을 수 없음
페이지를 찾을 수 없음
페이지를 찾을 수 없음
페이지를 찾을 수 없음
페이지를 찾을 수 없음
[an error occurred while processing this directive]

404 오류 - 페이지를 찾을 수 없습니다!

당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

문의하기
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
New Folder
    • Applied Filters:
    • Clear All

A folder with the name already exists.

Special characters not allowed
Product successfully added to project __PROJECT_NAME__
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    

You are about to leave the Solution building process.

Are you sure you want to leave?

Workpiece Selection

Standard

ALL

Material

Select a Value

Hardness

--

      Hardness Scale

      --

        Permitted Groups :

        Group

        SubGroup

        Hardness (HB)

        Hardness (HRC)

        Cancel Ok

        404 오류 - 페이지를 찾을 수 없습니다!

        당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

        문의하기
        You are about to add to your My Solutions page. Do you want to proceed?
        Select the destination where you want to move to.
        New Folder
          • Applied Filters:
          • Clear All

        A folder with the name already exists.

        Special characters not allowed
        Product successfully added to project __PROJECT_NAME__
        product-image
        Please adjust the following properties from

        ISO Catalog Number

        ANSI Catalog Number

        to find similar products.

        Models

        You should be logged to see your dashboard information
        Session expired due to inactivity, please login again
        The product/s () you were trying to add to the cart is/are not available, please contact customer service
        item(s) successfully added to the cart
        View Cart

        . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

        Minimum quantity should be

        SAP Material Number ISO Catalog Number Grade    

        You are about to leave the Solution building process.

        Are you sure you want to leave?

        Workpiece Selection

        Standard

        ALL

        Material

        Select a Value

        Hardness

        --

            Hardness Scale

            --

              Permitted Groups :

              Group

              SubGroup

              Hardness (HB)

              Hardness (HRC)

              Cancel Ok

              404 오류 - 페이지를 찾을 수 없습니다!

              당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

              문의하기
              You are about to add to your My Solutions page. Do you want to proceed?
              Select the destination where you want to move to.
              New Folder
                • Applied Filters:
                • Clear All

              A folder with the name already exists.

              Special characters not allowed
              Product successfully added to project __PROJECT_NAME__
              product-image
              Please adjust the following properties from

              ISO Catalog Number

              ANSI Catalog Number

              to find similar products.

              Models

              You should be logged to see your dashboard information
              Session expired due to inactivity, please login again
              The product/s () you were trying to add to the cart is/are not available, please contact customer service
              item(s) successfully added to the cart
              View Cart

              . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

              Minimum quantity should be

              SAP Material Number ISO Catalog Number Grade    

              You are about to leave the Solution building process.

              Are you sure you want to leave?

              Workpiece Selection

              Standard

              ALL

              Material

              Select a Value

              Hardness

              --

                  Hardness Scale

                  --

                    Permitted Groups :

                    Group

                    SubGroup

                    Hardness (HB)

                    Hardness (HRC)

                    Cancel Ok

                    404 오류 - 페이지를 찾을 수 없습니다!

                    당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

                    문의하기
                    You are about to add to your My Solutions page. Do you want to proceed?
                    Select the destination where you want to move to.
                    New Folder
                      • Applied Filters:
                      • Clear All

                    A folder with the name already exists.

                    Special characters not allowed
                    Product successfully added to project __PROJECT_NAME__
                    product-image
                    Please adjust the following properties from

                    ISO Catalog Number

                    ANSI Catalog Number

                    to find similar products.

                    Models

                    You should be logged to see your dashboard information
                    Session expired due to inactivity, please login again
                    The product/s () you were trying to add to the cart is/are not available, please contact customer service
                    item(s) successfully added to the cart
                    View Cart

                    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                    Minimum quantity should be

                    SAP Material Number ISO Catalog Number Grade    

                    You are about to leave the Solution building process.

                    Are you sure you want to leave?

                    Workpiece Selection

                    Standard

                    ALL

                    Material

                    Select a Value

                    Hardness

                    --

                        Hardness Scale

                        --

                          Permitted Groups :

                          Group

                          SubGroup

                          Hardness (HB)

                          Hardness (HRC)

                          Cancel Ok

                          404 오류 - 페이지를 찾을 수 없습니다!

                          당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

                          문의하기
                          You are about to add to your My Solutions page. Do you want to proceed?
                          Select the destination where you want to move to.
                          New Folder
                            • Applied Filters:
                            • Clear All

                          A folder with the name already exists.

                          Special characters not allowed
                          Product successfully added to project __PROJECT_NAME__
                          product-image
                          Please adjust the following properties from

                          ISO Catalog Number

                          ANSI Catalog Number

                          to find similar products.

                          Models

                          You should be logged to see your dashboard information
                          Session expired due to inactivity, please login again
                          The product/s () you were trying to add to the cart is/are not available, please contact customer service
                          item(s) successfully added to the cart
                          View Cart

                          . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                          Minimum quantity should be

                          SAP Material Number ISO Catalog Number Grade    

                          You are about to leave the Solution building process.

                          Are you sure you want to leave?

                          Workpiece Selection

                          Standard

                          ALL

                          Material

                          Select a Value

                          Hardness

                          --

                              Hardness Scale

                              --

                                Permitted Groups :

                                Group

                                SubGroup

                                Hardness (HB)

                                Hardness (HRC)

                                Cancel Ok

                                404 오류 - 페이지를 찾을 수 없습니다!

                                당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

                                문의하기
                                You are about to add to your My Solutions page. Do you want to proceed?
                                Select the destination where you want to move to.
                                New Folder
                                  • Applied Filters:
                                  • Clear All

                                A folder with the name already exists.

                                Special characters not allowed
                                Product successfully added to project __PROJECT_NAME__
                                product-image
                                Please adjust the following properties from

                                ISO Catalog Number

                                ANSI Catalog Number

                                to find similar products.

                                Models

                                You should be logged to see your dashboard information
                                Session expired due to inactivity, please login again
                                The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                item(s) successfully added to the cart
                                View Cart

                                . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                Minimum quantity should be

                                SAP Material Number ISO Catalog Number Grade    

                                You are about to leave the Solution building process.

                                Are you sure you want to leave?

                                Workpiece Selection

                                Standard

                                ALL

                                Material

                                Select a Value

                                Hardness

                                --

                                    Hardness Scale

                                    --

                                      Permitted Groups :

                                      Group

                                      SubGroup

                                      Hardness (HB)

                                      Hardness (HRC)

                                      Cancel Ok

                                      404 오류 - 페이지를 찾을 수 없습니다!

                                      당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

                                      문의하기
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Select the destination where you want to move to.
                                      New Folder
                                        • Applied Filters:
                                        • Clear All

                                      A folder with the name already exists.

                                      Special characters not allowed
                                      Product successfully added to project __PROJECT_NAME__
                                      product-image
                                      Please adjust the following properties from

                                      ISO Catalog Number

                                      ANSI Catalog Number

                                      to find similar products.

                                      Models

                                      You should be logged to see your dashboard information
                                      Session expired due to inactivity, please login again
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                      item(s) successfully added to the cart
                                      View Cart

                                      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                      Minimum quantity should be

                                      SAP Material Number ISO Catalog Number Grade    

                                      You are about to leave the Solution building process.

                                      Are you sure you want to leave?

                                      Workpiece Selection

                                      Standard

                                      ALL

                                      Material

                                      Select a Value

                                      Hardness

                                      --

                                          Hardness Scale

                                          --

                                            Permitted Groups :

                                            Group

                                            SubGroup

                                            Hardness (HB)

                                            Hardness (HRC)

                                            Cancel Ok

                                            404 오류 - 페이지를 찾을 수 없습니다!

                                            당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

                                            문의하기
                                            You are about to add to your My Solutions page. Do you want to proceed?
                                            Select the destination where you want to move to.
                                            New Folder
                                              • Applied Filters:
                                              • Clear All

                                            A folder with the name already exists.

                                            Special characters not allowed
                                            Product successfully added to project __PROJECT_NAME__
                                            product-image
                                            Please adjust the following properties from

                                            ISO Catalog Number

                                            ANSI Catalog Number

                                            to find similar products.

                                            Models

                                            You should be logged to see your dashboard information
                                            Session expired due to inactivity, please login again
                                            The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                            item(s) successfully added to the cart
                                            View Cart

                                            . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                            Minimum quantity should be

                                            SAP Material Number ISO Catalog Number Grade    

                                            You are about to leave the Solution building process.

                                            Are you sure you want to leave?

                                            Workpiece Selection

                                            Standard

                                            ALL

                                            Material

                                            Select a Value

                                            Hardness

                                            --

                                                Hardness Scale

                                                --

                                                  Permitted Groups :

                                                  Group

                                                  SubGroup

                                                  Hardness (HB)

                                                  Hardness (HRC)

                                                  Cancel Ok

                                                  404 오류 - 페이지를 찾을 수 없습니다!

                                                  당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

                                                  문의하기
                                                  You are about to add to your My Solutions page. Do you want to proceed?
                                                  Select the destination where you want to move to.
                                                  New Folder
                                                    • Applied Filters:
                                                    • Clear All

                                                  A folder with the name already exists.

                                                  Special characters not allowed
                                                  Product successfully added to project __PROJECT_NAME__
                                                  product-image
                                                  Please adjust the following properties from

                                                  ISO Catalog Number

                                                  ANSI Catalog Number

                                                  to find similar products.

                                                  Models

                                                  You should be logged to see your dashboard information
                                                  Session expired due to inactivity, please login again
                                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                                  item(s) successfully added to the cart
                                                  View Cart

                                                  . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                                  Minimum quantity should be

                                                  SAP Material Number ISO Catalog Number Grade    

                                                  You are about to leave the Solution building process.

                                                  Are you sure you want to leave?

                                                  Workpiece Selection

                                                  Standard

                                                  ALL

                                                  Material

                                                  Select a Value

                                                  Hardness

                                                  --

                                                      Hardness Scale

                                                      --

                                                        Permitted Groups :

                                                        Group

                                                        SubGroup

                                                        Hardness (HB)

                                                        Hardness (HRC)

                                                        Cancel Ok

                                                        404 오류 - 페이지를 찾을 수 없습니다!

                                                        당사 팀은 귀하가 원하는 제품을 찾도록 도와드립니다

                                                        문의하기
                                                        You are about to add to your My Solutions page. Do you want to proceed?
                                                        Select the destination where you want to move to.
                                                        New Folder
                                                          • Applied Filters:
                                                          • Clear All

                                                        A folder with the name already exists.

                                                        Special characters not allowed
                                                        Product successfully added to project __PROJECT_NAME__
                                                        product-image
                                                        Please adjust the following properties from

                                                        ISO Catalog Number

                                                        ANSI Catalog Number

                                                        to find similar products.

                                                        Models

                                                        You should be logged to see your dashboard information
                                                        Session expired due to inactivity, please login again
                                                        The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                                        item(s) successfully added to the cart
                                                        View Cart

                                                        . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                                        Minimum quantity should be

                                                        SAP Material Number ISO Catalog Number Grade    

                                                        You are about to leave the Solution building process.

                                                        Are you sure you want to leave?

                                                        Workpiece Selection

                                                        Standard

                                                        ALL

                                                        Material

                                                        Select a Value

                                                        Hardness

                                                        --

                                                            Hardness Scale

                                                            --

                                                              Permitted Groups :

                                                              Group

                                                              SubGroup

                                                              Hardness (HB)

                                                              Hardness (HRC)

                                                              Cancel Ok

                                                              Kenclamp™ • D 스타일 클램핑 • 네거티브 스타일 인서트용

                                                              Select Filters
                                                              Filters
                                                              Filters
                                                                View filters in
                                                                Metric
                                                                Inch
                                                                keyFilters
                                                                Workpiece Material
                                                                Workpiece Material
                                                                • P Steel (209)
                                                                  • P1
                                                                    Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(209)
                                                                  • P2
                                                                    Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(209)
                                                                  • P3
                                                                    Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(209)
                                                                  • P4
                                                                    Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(209)
                                                                  • P6
                                                                    High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(209)
                                                                  • P5
                                                                    Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(209)
                                                                  • P0
                                                                    Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(209)
                                                                • M Stainless Steel (209)
                                                                  • M2
                                                                    High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(209)
                                                                  • M1
                                                                    Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(209)
                                                                  • M3
                                                                    Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(209)
                                                                • K Cast Iron (209)
                                                                  • K1
                                                                    Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(209)
                                                                  • K3
                                                                    High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(209)
                                                                  • K2
                                                                    Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(209)
                                                                • N Non-Ferrous Materials (207)
                                                                  • N5
                                                                    Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (207)
                                                                  • N3
                                                                    High-Silicon Aluminum Alloys Si >12.2%(118)
                                                                  • N7
                                                                    MMC's (182)
                                                                  • N4
                                                                    Copper, Brass, Zinc-based on machinability index range of 70-100 (207)
                                                                  • N6
                                                                    Carbon, Graphite Composites, CFRP (207)
                                                                  • N1
                                                                    Wrought Aluminum (207)
                                                                  • N2
                                                                    Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(207)
                                                                • S High-Temp Alloys (209)
                                                                  • S2
                                                                    Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(209)
                                                                  • S4
                                                                    Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(209)
                                                                  • S1
                                                                    Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(209)
                                                                  • S3
                                                                    Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(209)
                                                                • H Hardened Materials (198)
                                                                  • H3
                                                                    Hardened Materials 56-60 HRC(183)
                                                                  • H1
                                                                    Hardened Materials 44-48 HRC(198)
                                                                  • H4
                                                                    Hardened Materials >60 HRC(151)
                                                                  • H2
                                                                    Hardened Materials 48-55 HRC(198)
                                                                • C CFRP Materials (207)
                                                                  • C2
                                                                    CFRP / Aluminium CFRP / Non-Ferrous (182)
                                                                  • C1
                                                                    CFRP, CFRP / CFRP (207)
                                                                Select First Choice
                                                                • CN (51)
                                                                • DE (51)
                                                                • GB (17)
                                                                • SG (6)
                                                                • US (59)
                                                                Applications
                                                                Applications
                                                                • Chamfer TurningChamfer Turning (4)
                                                                • FacingFacing (135)
                                                                • Multiple Direction CuttingMultiple Direction Cutting (166)
                                                                • ProfilingProfiling (141)
                                                                • TRN BoringTRN Boring (15)
                                                                • TurningTurning (192)
                                                                Cutting Condition Material
                                                                Cutting Condition Material
                                                                • H-All (183)
                                                                • K-All (209)
                                                                • K1 (80)
                                                                • M-All (205)
                                                                • N-All (159)
                                                                • P-All (209)
                                                                • S-All (204)
                                                                • S2 (183)
                                                                • S4 (85)
                                                                Cutting Condition
                                                                Cutting Condition
                                                                • Heavily Interrupted Cut (209)
                                                                • Lightly Interrupted Cut (209)
                                                                • Smooth Cut (209)
                                                                • Varying Depth of Cut (209)
                                                                Tool Cutting Edge Angle
                                                                Tool Cutting Edge Angle
                                                                • 45.0 (22)
                                                                • 62.5 (1)
                                                                • 63.0 (2)
                                                                • 72.5 (6)
                                                                • 75.0 (34)
                                                                • 90.0 (8)
                                                                • 93.0 (52)
                                                                • 95.0 (66)
                                                                • 107.5 (6)
                                                                • 117.5 (12)
                                                                Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
                                                                Connection Style
                                                                Connection Style
                                                                • KM (25)
                                                                • Toolholder (169)
                                                                Cutting Edges Per Insert
                                                                Cutting Edges Per Insert
                                                                • 0.0 (8)
                                                                • 1.0 (111)
                                                                • 2.0 (140)
                                                                • 3.0 (25)
                                                                • 4.0 (172)
                                                                • 6.0 (34)
                                                                • 8.0 (125)
                                                                Cutting Edges Per Insert MintoCutting Edges Per Insert Max
                                                                Internal Coolant Capability
                                                                Internal Coolant Capability
                                                                Over All Length [L]
                                                                Over All Length [L]
                                                                • 1.7717 in(10)
                                                                • 1.772 in(13)
                                                                • 1.9685 in(11)
                                                                • 1.969 in(5)
                                                                • 2.165 in(1)
                                                                • 4.5 in(10)
                                                                • 4.921 in(18)
                                                                • 5.0 in(22)
                                                                • 5.906 in(32)
                                                                • 6.0 in(66)
                                                                • 6.693 in(18)
                                                                • 6.732 in(1)
                                                                • 9.843 in(2)
                                                                Over All Length [L] MintoOver All Length [L] Max
                                                                Over All Length [L]
                                                                Over All Length [L]
                                                                • 45.0 mm(23)
                                                                • 50.0 mm(16)
                                                                • 55.0 mm(1)
                                                                • 114.3 mm(10)
                                                                • 125.0 mm(17)
                                                                • 127.0 mm(22)
                                                                • 150.0 mm(33)
                                                                • 152.4 mm(66)
                                                                • 170.0 mm(18)
                                                                • 171.0 mm(1)
                                                                • 250.0 mm(2)
                                                                Over All Length [L] MintoOver All Length [L] Max
                                                                cornerConfiguration
                                                                Corner Radius
                                                                Corner Radius
                                                                • 0.004 in(135)
                                                                • 0.008 in(122)
                                                                • 0.014 in(14)
                                                                • 0.016 in(192)
                                                                • 0.024 in(16)
                                                                • 0.031 in(205)
                                                                • -0.039 in(8)
                                                                • 0.047 in(205)
                                                                • 0.062 in(39)
                                                                • 0.063 in(155)
                                                                • 0.094 in(83)
                                                                • 0.125 in(8)
                                                                • 0.126 in(25)
                                                                • 0.157 in(2)
                                                                • 0.25 in(3)
                                                                Corner Radius MintoCorner Radius Max
                                                                Corner Radius
                                                                Corner Radius
                                                                • 0.1 mm(135)
                                                                • 0.2 mm(122)
                                                                • 0.35 mm(14)
                                                                • 0.4 mm(192)
                                                                • 0.6 mm(16)
                                                                • 0.8 mm(205)
                                                                • -1.0 mm(8)
                                                                • 1.2 mm(205)
                                                                • 1.575 mm(39)
                                                                • 1.6 mm(155)
                                                                • 2.375 mm(32)
                                                                • 2.4 mm(66)
                                                                • 3.175 mm(8)
                                                                • 3.2 mm(25)
                                                                • 4.0 mm(2)
                                                                • 6.35 mm(3)
                                                                Corner Radius MintoCorner Radius Max
                                                                application
                                                                Minimum Depth of Cut
                                                                Minimum Depth of Cut
                                                                Minimum Feed
                                                                Minimum Feed
                                                                Grade Of Cutting Tool
                                                                Grade Of Cutting Tool
                                                                • 13E (161)
                                                                • 241 (39)
                                                                • CL4 (95)
                                                                • CM2 (154)
                                                                • CM3 (103)
                                                                • CM4 (84)
                                                                • CPX (134)
                                                                • CW2 (54)
                                                                • CW2015 (17)
                                                                • CW5025 (15)
                                                                • GX (88)
                                                                • HK1500 (15)
                                                                • HT2 (64)
                                                                • HTX (40)
                                                                • K060 (87)
                                                                • K090 (171)
                                                                • K1 (60)
                                                                • K10M (188)
                                                                • K10P (187)
                                                                • K10U (157)
                                                                • K15U (157)
                                                                • K20K (192)
                                                                • K21 (89)
                                                                • K25M (189)
                                                                • K25P (167)
                                                                • K313 (204)
                                                                • K35P (103)
                                                                • K420 (151)
                                                                • K45 (124)
                                                                • K68 (171)
                                                                • KB1340 (80)
                                                                • KB1345 (57)
                                                                • KB1610 (132)
                                                                • KB1625 (116)
                                                                • KB1630 (86)
                                                                • KB5610 (101)
                                                                • KB5625 (116)
                                                                • KB5630 (85)
                                                                • KB9610 (146)
                                                                • KB9640 (99)
                                                                • KBH10 (146)
                                                                • KBH10B (100)
                                                                • KBH20 (146)
                                                                • KBH20B (100)
                                                                • KBK35 (39)
                                                                • KC210 (119)
                                                                • KC250 (119)
                                                                • KC5010 (209)
                                                                • KC5025 (203)
                                                                • KC5410 (180)
                                                                • KC5510 (200)
                                                                • KC5525 (114)
                                                                • KC710 (42)
                                                                • KC720 (160)
                                                                • KC722 (39)
                                                                • KC730 (190)
                                                                • KC7310 (204)
                                                                • KC732 (157)
                                                                • KC8050 (209)
                                                                • KC810 (198)
                                                                • KC850 (200)
                                                                • KC9010 (201)
                                                                • KC9025 (209)
                                                                • KC910 (187)
                                                                • KC9105 (198)
                                                                • KC9110 (209)
                                                                • KC9120 (200)
                                                                • KC9125 (209)
                                                                • KC9125RR (30)
                                                                • KC9140 (209)
                                                                • KC9145 (186)
                                                                • KC9210 (14)
                                                                • KC9215 (201)
                                                                • KC9225 (201)
                                                                • KC9240 (202)
                                                                • KC9240NEW (202)
                                                                • KC9245 (201)
                                                                • KC9315 (204)
                                                                • KC9320 (206)
                                                                • KC9325 (203)
                                                                • KC935 (208)
                                                                • KC950 (188)
                                                                • KC990 (209)
                                                                • KCD25 (17)
                                                                • KCK05 (204)
                                                                • KCK05B (190)
                                                                • KCK15 (203)
                                                                • KCK15B (204)
                                                                • KCK20 (203)
                                                                • KCK20B (203)
                                                                • KCM15 (201)
                                                                • KCM15B (199)
                                                                • KCM25 (202)
                                                                • KCM25B (201)
                                                                • KCM35 (189)
                                                                • KCM35B (135)
                                                                • KCP05 (188)
                                                                • KCP05B (175)
                                                                • KCP10 (209)
                                                                • KCP10B (209)
                                                                • KCP25 (209)
                                                                • KCP25B (208)
                                                                • KCP25C (209)
                                                                • KCP30 (209)
                                                                • KCP30B (161)
                                                                • KCP40 (155)
                                                                • KCP40B (194)
                                                                • KCPK05 (191)
                                                                • KCS10 (39)
                                                                • KCS10B (186)
                                                                • KCU10 (208)
                                                                • KCU10B (207)
                                                                • KCU25 (203)
                                                                • KCU25B (203)
                                                                • KD050 (124)
                                                                • KD081 (124)
                                                                • KD100 (88)
                                                                • KD120 (127)
                                                                • KD1400 (102)
                                                                • KD1405 (85)
                                                                • KD1425 (102)
                                                                • KM1 (80)
                                                                • KMF (39)
                                                                • KS15 (39)
                                                                • KT1120 (47)
                                                                • KT125 (138)
                                                                • KT150 (119)
                                                                • KT175 (141)
                                                                • KT315 (175)
                                                                • KT325 (65)
                                                                • KT5020 (30)
                                                                • KTP10 (166)
                                                                • KTP25S (116)
                                                                • KU10T (174)
                                                                • KU30T (207)
                                                                • KY1310 (118)
                                                                • KY1320 (178)
                                                                • KY1540 (103)
                                                                • KY1615 (168)
                                                                • KY2000 (111)
                                                                • KY2100 (86)
                                                                • KY3000 (165)
                                                                • KY3400 (140)
                                                                • KY3500 (180)
                                                                • KY4000 (112)
                                                                • KY4300 (79)
                                                                • KY4400 (180)
                                                                • KYHK15B (183)
                                                                • KYK10 (103)
                                                                • KYK25 (138)
                                                                • KYK35 (180)
                                                                • KYS25 (95)
                                                                • KYS30 (111)
                                                                • NL200 (53)
                                                                • NL250 (191)
                                                                • NL300 (119)
                                                                • NL400 (80)
                                                                • NL920 (130)
                                                                • P25 (77)
                                                                • PB100 (2)
                                                                • PB170 (2)
                                                                • PB250 (2)
                                                                • PB300 (2)
                                                                • PS5 (64)
                                                                • SP0819 (104)
                                                                • SP0A00 (7)
                                                                • SP3019 (119)
                                                                • SP4019 (142)
                                                                • SP4036 (29)
                                                                • SP4093 (29)
                                                                • SP61EJ (30)
                                                                • SPADAP (12)
                                                                • SPSREJ (1)
                                                                • THM (13)
                                                                • THM-X (9)
                                                                • THMF-X (9)
                                                                • TN10P (19)
                                                                • TN10U (18)
                                                                • TN15M (19)
                                                                • TN15U (18)
                                                                • TN2000 (15)
                                                                • TN20K (19)
                                                                • TN20P (19)
                                                                • TN30M (19)
                                                                • TN30P (19)
                                                                • TN4000 (15)
                                                                • TN5015 (19)
                                                                • TN5020 (16)
                                                                • TN5105 (18)
                                                                • TN5120 (19)
                                                                • TN6010 (5)
                                                                • TN6025 (11)
                                                                • TN7005 (7)
                                                                • TN7010 (19)
                                                                • TN7015 (19)
                                                                • TN7025 (19)
                                                                • TN7035 (17)
                                                                • TN7105 (4)
                                                                • TN7110 (19)
                                                                • TN7115 (19)
                                                                • TN7125 (16)
                                                                • TN7135 (16)
                                                                • TN8025 (19)
                                                                • TTI15 (2)
                                                                • TTM (4)
                                                                • TTM09 (11)
                                                                • TTR (13)
                                                                • TTS (9)
                                                                • TTX (6)
                                                                • WBH10C (14)
                                                                • WBH10P (5)
                                                                • WBH10U (14)
                                                                • WBH20P (14)
                                                                • WBH25P (12)
                                                                • WBH25U (12)
                                                                • WBH30P (5)
                                                                • WBK40U (9)
                                                                • WBK45U (5)
                                                                • WDN00U (5)
                                                                • WDN25U (7)
                                                                • WK05CT (19)
                                                                • WK15CT (11)
                                                                • WK20CT (19)
                                                                • WM15CT (19)
                                                                • WM25CT (19)
                                                                • WM35CT (19)
                                                                • WP05CT (4)
                                                                • WP15CT (19)
                                                                • WP25CT (19)
                                                                • WP35CT (19)
                                                                • WS10PT (19)
                                                                • WS25PT (19)
                                                                • WU10HT (19)
                                                                • WU10PT (11)
                                                                • WU25PT (11)
                                                                • X00511 (39)
                                                                • X00580 (39)
                                                                • X00581 (39)
                                                                • X00582 (39)
                                                                • X00583 (39)
                                                                • X00584 (39)
                                                                • X00585 (39)
                                                                • X00586 (39)
                                                                • X00591 (39)
                                                                • X00592 (39)
                                                                • X00593 (39)
                                                                • X00594 (39)
                                                                • X00596 (39)
                                                                • X00597 (39)
                                                                • X00599 (39)
                                                                Hand Of Tool
                                                                Hand Of Tool
                                                                • L (80)
                                                                • N (18)
                                                                • R (96)
                                                                Wiper Insert
                                                                Wiper Insert
                                                                • N (209)
                                                                • Y (98)
                                                                F Dimension
                                                                F Dimension
                                                                • 0.0 mm(2)
                                                                • 9.43 mm(1)
                                                                • 9.52 mm(1)
                                                                • 10.0 mm(3)
                                                                • 12.0 mm(3)
                                                                • 12.6 mm(3)
                                                                • 12.62 mm(1)
                                                                • 12.7 mm(1)
                                                                • 13.0 mm(1)
                                                                • 15.5 mm(1)
                                                                • 15.88 mm(2)
                                                                • 19.5 mm(1)
                                                                • 22.3 mm(1)
                                                                • 23.16 mm(2)
                                                                • 24.0 mm(4)
                                                                • 25.0 mm(13)
                                                                • 25.4 mm(12)
                                                                • 27.0 mm(15)
                                                                • 28.65 mm(2)
                                                                • 28.7 mm(1)
                                                                • 30.0 mm(4)
                                                                • 31.75 mm(48)
                                                                • 32.0 mm(37)
                                                                • 35.0 mm(4)
                                                                • 38.1 mm(16)
                                                                • 38.13 mm(1)
                                                                • 40.0 mm(8)
                                                                • 50.0 mm(1)
                                                                • 50.8 mm(5)
                                                                F Dimension MintoF Dimension Max
                                                                F Dimension
                                                                F Dimension
                                                                • 0.0 in(2)
                                                                • 0.371 in(1)
                                                                • 0.375 in(1)
                                                                • 0.393 in(1)
                                                                • 0.394 in(2)
                                                                • 0.472 in(3)
                                                                • 0.496 in(3)
                                                                • 0.497 in(1)
                                                                • 0.5 in(1)
                                                                • 0.512 in(1)
                                                                • 0.61 in(1)
                                                                • 0.625 in(2)
                                                                • 0.768 in(1)
                                                                • 0.878 in(1)
                                                                • 0.912 in(2)
                                                                • 0.9449 in(3)
                                                                • 0.945 in(1)
                                                                • 0.984 in(13)
                                                                • 1.0 in(12)
                                                                • 1.063 in(15)
                                                                • 1.128 in(2)
                                                                • 1.13 in(1)
                                                                • 1.1811 in(4)
                                                                • 1.25 in(48)
                                                                • 1.26 in(37)
                                                                • 1.378 in(4)
                                                                • 1.5 in(16)
                                                                • 1.501 in(1)
                                                                • 1.575 in(8)
                                                                • 1.969 in(1)
                                                                • 2.0 in(5)
                                                                F Dimension MintoF Dimension Max
                                                                Minimum Axial Groove Diameter
                                                                Minimum Axial Groove Diameter
                                                                • -1.0 mm(7)
                                                                • 54.0 mm(6)
                                                                • 70.0 mm(5)
                                                                • 86.0 mm(4)
                                                                Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
                                                                Minimum Axial Groove Diameter
                                                                Minimum Axial Groove Diameter
                                                                • -1.0 in(7)
                                                                • 2.126 in(6)
                                                                • 2.756 in(5)
                                                                • 3.386 in(4)
                                                                Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
                                                                Maximum Axial Groove Diameter
                                                                Maximum Axial Groove Diameter
                                                                • -1.0 in(8)
                                                                Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
                                                                Maximum Axial Groove Diameter
                                                                Maximum Axial Groove Diameter
                                                                • -1.0 mm(8)
                                                                Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
                                                                Cutting Direction
                                                                Cutting Direction
                                                                • B (60)
                                                                • E (31)
                                                                • S (103)
                                                                Rake Angle Style
                                                                Rake Angle Style
                                                                • DOUBLE NEGATIVE (165)
                                                                • NEGATIVE-ZERO (29)
                                                                Maximum Bore Depth
                                                                Maximum Bore Depth
                                                                • 1.772 in(10)
                                                                • 1.969 in(4)
                                                                • 2.165 in(1)
                                                                Maximum Bore Depth MintoMaximum Bore Depth Max
                                                                Maximum Bore Depth
                                                                Maximum Bore Depth
                                                                • 45.0 mm(10)
                                                                • 50.0 mm(4)
                                                                • 55.0 mm(1)
                                                                Maximum Bore Depth MintoMaximum Bore Depth Max
                                                                frontEnd
                                                                Insert Shape
                                                                Insert Shape
                                                                • C-DIAMOND/RHOMBIC 80 (63)
                                                                • D-DIAMOND/RHOMBIC 55 (43)
                                                                • R-ROUND (3)
                                                                • S-SQUARE 90 (34)
                                                                • T-TRIANGLE 60 (9)
                                                                • V-DIAMOND/RHOMBIC 35 (32)
                                                                • W-TRIGON 80 (25)
                                                                insertGeometry
                                                                Cutting Tool Material
                                                                Cutting Tool Material
                                                                • B H (157)
                                                                • B L (154)
                                                                • C A (187)
                                                                • C N (184)
                                                                • D P (119)
                                                                • H T (178)
                                                                • H W (209)
                                                                backEnd
                                                                Connection Type
                                                                Connection Type
                                                                • SQUARE SHANK (169)
                                                                • TAPER SHANK (25)
                                                                System Size
                                                                System Size
                                                                • KM40TS (17)
                                                                • KM50TS (8)
                                                                Back-End Diameter
                                                                Back-End Diameter
                                                                • 40.0 mm(27)
                                                                • 50.0 mm(13)
                                                                Back-End Diameter MintoBack-End Diameter Max
                                                                Shank Height
                                                                Shank Height
                                                                • 0.75 in(15)
                                                                • 0.787 in(9)
                                                                • 0.788 in(9)
                                                                • 0.984 in(32)
                                                                • 1.0 in(53)
                                                                • 1.25 in(25)
                                                                • 1.26 in(19)
                                                                • 1.5 in(5)
                                                                • 1.575 in(2)
                                                                Shank Height MintoShank Height Max
                                                                Shank Height
                                                                Shank Height
                                                                • 19.05 mm(15)
                                                                • 20.0 mm(18)
                                                                • 25.0 mm(32)
                                                                • 25.4 mm(53)
                                                                • 31.75 mm(25)
                                                                • 32.0 mm(19)
                                                                • 38.1 mm(5)
                                                                • 40.0 mm(2)
                                                                Shank Height MintoShank Height Max
                                                                Shank Width
                                                                Shank Width
                                                                • 0.75 in(15)
                                                                • 0.787 in(9)
                                                                • 0.788 in(9)
                                                                • 0.984 in(42)
                                                                • 1.0 in(58)
                                                                • 1.25 in(20)
                                                                • 1.26 in(9)
                                                                • 1.5 in(5)
                                                                • 1.575 in(2)
                                                                Shank Width MintoShank Width Max
                                                                Shank Width
                                                                Shank Width
                                                                • 19.05 mm(15)
                                                                • 20.0 mm(18)
                                                                • 25.0 mm(42)
                                                                • 25.4 mm(58)
                                                                • 31.75 mm(20)
                                                                • 32.0 mm(9)
                                                                • 38.1 mm(5)
                                                                • 40.0 mm(2)
                                                                Shank Width MintoShank Width Max
                                                                No filters matching ""
                                                                Kenclamp™ • D-Style Clamping • For Negative Style Inserts
                                                                KM™ Quick Change Tools
                                                                (40)

                                                                KM™ Quick Change Tools

                                                                DDJN-KC 93°
                                                                (12)

                                                                DDJN-KC 93°

                                                                DTGN-KC 90°
                                                                (1)

                                                                DTGN-KC 90°

                                                                DSSN-KC 45°
                                                                (3)

                                                                DSSN-KC 45°

                                                                DCLN-KC 95°
                                                                (14)

                                                                DCLN-KC 95°

                                                                DCSN-KC 45°
                                                                (2)

                                                                DCSN-KC 45°

                                                                DSRN-KC 75°
                                                                (1)

                                                                DSRN-KC 75°

                                                                DSDN-KC 45°
                                                                (5)

                                                                DSDN-KC 45°

                                                                DDNN-KC 63°
                                                                (2)

                                                                DDNN-KC 63°

                                                                DWLN-KC 95°
                                                                (10)

                                                                DWLN-KC 95°

                                                                DVVN-KC 72.5°
                                                                (2)

                                                                DVVN-KC 72.5°

                                                                DVJN-KC 93°
                                                                (6)

                                                                DVJN-KC 93°

                                                                DWLN-KC -5°
                                                                (11)

                                                                DWLN-KC -5°

                                                                DVVN-KC 17.5°
                                                                (4)

                                                                DVVN-KC 17.5°

                                                                DTGN-KC 0°
                                                                (1)

                                                                DTGN-KC 0°

                                                                DVJN-KC -3°
                                                                (8)

                                                                DVJN-KC -3°

                                                                DSDN-KC 45°
                                                                (4)

                                                                DSDN-KC 45°

                                                                You are about to add to your My Solutions page. Do you want to proceed?
                                                                Select the destination where you want to move to.
                                                                New Folder
                                                                  • Applied Filters:
                                                                  • Clear All

                                                                A folder with the name already exists.

                                                                Special characters not allowed
                                                                Product successfully added to project __PROJECT_NAME__
                                                                product-image
                                                                Please adjust the following properties from

                                                                ISO Catalog Number

                                                                ANSI Catalog Number

                                                                to find similar products.

                                                                Models

                                                                You should be logged to see your dashboard information
                                                                Session expired due to inactivity, please login again
                                                                The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                                                item(s) successfully added to the cart
                                                                View Cart

                                                                . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                                                Minimum quantity should be

                                                                SAP Material Number ISO Catalog Number Grade  

                                                                You are about to leave the Solution building process.

                                                                Are you sure you want to leave?

                                                                Workpiece Selection

                                                                Standard

                                                                ALL

                                                                Material

                                                                Select a Value

                                                                Hardness

                                                                --

                                                                    Hardness Scale

                                                                    --

                                                                      Permitted Groups :

                                                                      Group

                                                                      SubGroup

                                                                      Hardness (HB)

                                                                      Hardness (HRC)

                                                                      CancelOk