404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 오류 - 페이지를 찾을 수 없습니다!
-
- Applied Filters:
- Clear All
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
KSEM Chamfering Solutions
- P Steel (53)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(53)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(53)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(53)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(53)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(53)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(53)
- M Stainless Steel (53)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(53)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(53)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(53)
- K Cast Iron (53)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(53)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(53)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(53)
- N Non-Ferrous Materials (53)
- N1Wrought Aluminum (53)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(53)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (53)
- N6Carbon, Graphite Composites, CFRP (53)
- N3High-Silicon Aluminum Alloys Si >12.2%(53)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (53)
- N7MMC's (53)
- S High-Temp Alloys (53)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(53)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(53)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(53)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(53)
- H Hardened Materials (28)
- H4Hardened Materials >60 HRC(28)
- H1Hardened Materials 44-48 HRC(28)
- H2Hardened Materials 48-55 HRC(28)
- H3Hardened Materials 56-60 HRC(28)
Countersinking (41)
Drilling (41)
- 0.4921 in(1)
- 0.5354 in(1)
- 0.5748 in(1)
- 0.6299 in(1)
- 0.6315 in(1)
- 0.7874 in(1)
- 0.7886 in(1)
- 0.8701 in(1)
- 0.872 in(1)
- 1.1063 in(1)
- 1.1875 in(1)
- 12.5 mm(1)
- 13.6 mm(1)
- 14.6 mm(1)
- 16.0 mm(1)
- 16.04 mm(1)
- 20.0 mm(1)
- 20.03 mm(1)
- 22.1 mm(1)
- 22.15 mm(1)
- 28.1 mm(1)
- 30.16 mm(1)
- 14.5 mm(1)
- 15.8 mm(1)
- 18.0 mm(1)
- 18.198 mm(1)
- 19.84 mm(1)
- 22.0 mm(1)
- 24.0 mm(1)
- 26.0 mm(1)
- 28.0 mm(1)
- 30.0 mm(1)
- 32.0 mm(1)
- 36.0 mm(1)
- 40.0 mm(1)
- 0.5709 in(1)
- 0.622 in(1)
- 0.7087 in(1)
- 0.7165 in(1)
- 0.7811 in(1)
- 0.8661 in(1)
- 0.9449 in(1)
- 1.0236 in(1)
- 1.1024 in(1)
- 1.1811 in(1)
- 1.2598 in(1)
- 1.4173 in(1)
- 1.5748 in(1)
- KSEM Chamfer Ring Connection (28)
- Whistle Drive 2 (2)
- Whistle Notch 2 (11)
- 2 (41)
- 0.0 (36)
- 3.0 (25)
- 1.5748 in(7)
- 1.6535 in(8)
- 1.8898 in(5)
- 1.9685 in(4)
- 2.126 in(3)
- 2.2047 in(1)
- 4.2197 in(1)
- 4.2204 in(1)
- 4.3047 in(1)
- 4.3146 in(1)
- 4.6421 in(1)
- 4.7335 in(1)
- 4.8248 in(1)
- 5.074 in(1)
- 5.1654 in(1)
- 5.2567 in(1)
- 5.3484 in(1)
- 6.1091 in(1)
- 6.4886 in(1)
- 40.0 mm(7)
- 42.0 mm(8)
- 48.0 mm(5)
- 50.0 mm(4)
- 54.0 mm(3)
- 56.0 mm(1)
- 107.18 mm(1)
- 107.198 mm(1)
- 109.34 mm(1)
- 109.59 mm(1)
- 117.91 mm(1)
- 120.23 mm(1)
- 122.55 mm(1)
- 128.88 mm(1)
- 131.2 mm(1)
- 133.52 mm(1)
- 135.85 mm(1)
- 155.17 mm(1)
- 164.81 mm(1)
- 0.008 in(12)
- 0.2 mm(12)
- 0.0 mm(12)
- 0.0 in(12)
- CS5 (28)
- KC7015 (45)
- KC7030 (3)
- KC7135 (5)
- KC7140 (17)
- KC7215 (28)
- KC7235 (6)
- KC7315 (45)
- KC7410 (5)
- KCMS15 (7)
- KCMS35 (3)
- KCPM45 (5)
- KMF (28)
- R (41)
- 86-02 Indexable Step Drill (4)
- 86-04 Indexable Counterbore (5)
- 86-10 Indexable Counterbore (23)
- 86-10 Indexable Step Drill (9)
- N (12)
- 41.0 (28)
- 45.0 (28)
- COUNTERBORE/COUNTERSINK MISC (28)
- KSEM DRILL (8)
- T-TRIANGLE 60 (25)
- 140.0 (8)
- 150.0 (5)
- 180.0 (3)
- T-TRIANGLE 60 (12)
- 5.55 mm(3)
- 6.35 mm(3)
- 7.95 mm(3)
- 9.525 mm(3)
- 0.219 in(3)
- 0.25 in(3)
- 0.313 in(3)
- 0.375 in(3)
- 9.63 mm(3)
- 11.0 mm(3)
- 13.75 mm(3)
- 16.5 mm(3)
- 0.3791 in(3)
- 0.4331 in(3)
- 0.5413 in(3)
- 0.65 in(3)
- GD (12)
- H W (12)
- G (12)
- CYLINDRICAL (41)
- 12.5 mm(1)
- 13.0 mm(1)
- 13.5 mm(1)
- 14.0 mm(1)
- 14.5 mm(1)
- 15.0 mm(1)
- 15.5 mm(1)
- 16.0 mm(3)
- 16.5 mm(1)
- 17.0 mm(1)
- 17.5 mm(1)
- 18.0 mm(1)
- 18.5 mm(1)
- 19.0 mm(1)
- 19.5 mm(1)
- 20.0 mm(3)
- 20.5 mm(1)
- 21.0 mm(1)
- 21.5 mm(1)
- 22.0 mm(1)
- 22.5 mm(1)
- 23.0 mm(1)
- 23.5 mm(1)
- 24.0 mm(1)
- 24.5 mm(1)
- 25.0 mm(4)
- 26.0 mm(1)
- 26.5 mm(1)
- 32.0 mm(4)
- 50.0 mm(2)
- 0.4921 in(1)
- 0.5118 in(1)
- 0.5315 in(1)
- 0.5512 in(1)
- 0.5709 in(1)
- 0.5906 in(1)
- 0.6102 in(1)
- 0.6299 in(3)
- 0.6496 in(1)
- 0.6693 in(1)
- 0.689 in(1)
- 0.7087 in(1)
- 0.7283 in(1)
- 0.748 in(1)
- 0.7677 in(1)
- 0.7874 in(3)
- 0.8071 in(1)
- 0.8268 in(1)
- 0.8465 in(1)
- 0.8661 in(1)
- 0.8858 in(1)
- 0.9055 in(1)
- 0.9252 in(1)
- 0.9449 in(1)
- 0.9646 in(1)
- 0.9843 in(4)
- 1.0236 in(1)
- 1.0433 in(1)
- 1.2598 in(4)
- 1.9685 in(2)
- N (12)
