[an error occurred while processing this directive]
404エラー - ページが見つかりません!
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
KM™ Mini
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (154)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(154)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(154)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(154)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(154)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(154)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(154)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(154)
- M Stainless Steel (152)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(152)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(152)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(152)
- K Cast Iron (154)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(154)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(154)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(154)
- N Non-Ferrous Materials (151)
- N6Carbon, Graphite Composites, CFRP (151)
- N1Wrought Aluminum (151)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(151)
- N3High-Silicon Aluminum Alloys Si >12.2%(118)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (151)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (151)
- N7MMC's (126)
- S High-Temp Alloys (152)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(152)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(152)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(152)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(152)
- H Hardened Materials (135)
- H1Hardened Materials 44-48 HRC(135)
- H4Hardened Materials >60 HRC(114)
- H3Hardened Materials 56-60 HRC(115)
- H2Hardened Materials 48-55 HRC(135)
- C CFRP Materials (98)
- C2CFRP / Aluminium CFRP / Non-Ferrous (81)
- C1CFRP, CFRP / CFRP (98)
Applications
Applications
Chamfer Turning (9)
Cut-Off (8)
Deep Grooving (8)
Face Grooving (8)
Facing (38)
Grooving (41)
ID Grooving (7)
ID Thread Turning (11)
Multiple Direction Cutting (90)
OD Thread Turning (28)
Plunge Turning (11)
Profiling (93)
TRN Boring (19)
Turning (79)
Cutting Condition Material
Cutting Condition Material
- H-All (121)
- K-All (139)
- K1 (21)
- M-All (139)
- N-All (132)
- P-All (142)
- S-All (137)
- S2 (54)
- S4 (30)
Type of Thread
Type of Thread
- 55 (12)
- 60 (35)
- ACME (26)
- API (16)
- API BUTTRESS (2)
- API RD (20)
- BSPT (10)
- BSW (22)
- BUTTRESS (23)
- M (27)
- NPT (20)
- NPTF (10)
- RD DIN 405 (12)
- STUB ACME (22)
- TR DIN 103 (12)
- UN (33)
- UNJ (20)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (142)
- Lightly Interrupted Cut (142)
- Smooth Cut (142)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (3)
- 62.5 (7)
- 75.0 (6)
- 90.0 (59)
- 93.0 (49)
- 95.0 (23)
- 107.5 (9)
to
Connection Style
Connection Style
- KM (156)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (5)
- 1.0 (101)
- 2.0 (109)
- 3.0 (33)
- 4.0 (53)
- 6.0 (20)
- 8.0 (22)
to
Over All Length [L]
Over All Length [L]
- 0.9843 in(35)
- 1.181 in(14)
- 1.1811 in(105)
- 1.378 in(1)
- 3.516 in(1)
- 3.819 in(2)
- 3.937 in(2)
- 4.7244 in(1)
- 4.819 in(2)
- 30.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 1.181 mm(1)
- 25.0 mm(35)
- 30.0 mm(119)
- 35.0 mm(1)
- 89.31 mm(1)
- 97.0 mm(2)
- 100.0 mm(2)
- 120.0 mm(1)
- 122.4 mm(2)
to
Corner Radius
Corner Radius
- 0.0 in(9)
- 0.001 in(19)
- 0.002 in(46)
- 0.003 in(33)
- 0.004 in(99)
- 0.005 in(14)
- 0.006 in(23)
- 0.007 in(23)
- 0.008 in(123)
- 0.009 in(14)
- 0.01 in(23)
- 0.011 in(18)
- 0.012 in(14)
- 0.013 in(18)
- 0.014 in(18)
- 0.015 in(4)
- 0.016 in(117)
- 0.017 in(2)
- 0.018 in(14)
- 0.019 in(5)
- 0.02 in(19)
- 0.021 in(2)
- 0.023 in(14)
- 0.024 in(8)
- 0.028 in(1)
- 0.03 in(13)
- 0.031 in(121)
- 0.033 in(4)
- 0.035 in(14)
- 0.036 in(1)
- 0.039 in(24)
- -0.039 in(5)
- 0.041 in(4)
- 0.047 in(111)
- 0.049 in(19)
- 0.059 in(24)
- 0.06 in(6)
- 0.062 in(16)
- 0.063 in(80)
- 0.069 in(19)
- 0.078 in(10)
- 0.079 in(18)
- 0.08 in(4)
- 0.089 in(14)
- 0.094 in(45)
- 0.098 in(6)
- 0.099 in(2)
- 0.125 in(9)
- 0.126 in(5)
- 0.188 in(2)
- 0.197 in(1)
- 0.25 in(1)
to
Corner Radius
Corner Radius
- 0.0 mm(9)
- 0.025 mm(19)
- 0.05 mm(46)
- 0.075 mm(33)
- 0.1 mm(99)
- 0.125 mm(14)
- 0.15 mm(23)
- 0.175 mm(23)
- 0.2 mm(123)
- 0.225 mm(14)
- 0.25 mm(23)
- 0.275 mm(18)
- 0.3 mm(14)
- 0.325 mm(18)
- 0.35 mm(18)
- 0.375 mm(4)
- 0.4 mm(117)
- 0.425 mm(2)
- 0.45 mm(14)
- 0.475 mm(5)
- 0.5 mm(19)
- 0.525 mm(2)
- 0.575 mm(14)
- 0.6 mm(8)
- 0.7 mm(1)
- 0.75 mm(13)
- 0.775 mm(19)
- 0.8 mm(102)
- 0.85 mm(4)
- 0.9 mm(14)
- 0.925 mm(1)
- 1.0 mm(24)
- -1.0 mm(5)
- 1.05 mm(4)
- 1.2 mm(111)
- 1.25 mm(19)
- 1.5 mm(24)
- 1.525 mm(6)
- 1.575 mm(16)
- 1.6 mm(80)
- 1.75 mm(19)
- 1.975 mm(10)
- 2.0 mm(18)
- 2.025 mm(4)
- 2.25 mm(14)
- 2.375 mm(15)
- 2.4 mm(30)
- 2.5 mm(6)
- 2.525 mm(2)
- 3.175 mm(9)
- 3.2 mm(5)
- 4.775 mm(2)
- 5.0 mm(1)
- 6.35 mm(1)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (45)
- 241 (6)
- CL4 (21)
- CM2 (45)
- CM3 (26)
- CM4 (17)
- CPX (37)
- CW2 (15)
- CW2015 (43)
- CW5025 (46)
- GH1 (9)
- GX (17)
- HCK10 (15)
- HCK20 (1)
- HK1500 (53)
- HK35 (13)
- HT2 (46)
- HTX (39)
- HWK15 (16)
- K00331 (5)
- K060 (28)
- K090 (48)
- K1 (11)
- K1010P (9)
- K1025 (4)
- K10M (78)
- K10P (67)
- K10U (81)
- K15 (2)
- K15U (79)
- K20K (73)
- K21 (22)
- K25M (75)
- K25P (67)
- K2885 (19)
- K313 (134)
- K35P (39)
- K420 (73)
- K45 (41)
- K4H (14)
- K68 (106)
- KB1340 (21)
- KB1345 (51)
- KB1610 (63)
- KB1625 (53)
- KB1630 (61)
- KB5610 (55)
- KB5625 (79)
- KB5630 (44)
- KB9610 (70)
- KB9640 (30)
- KBH10 (71)
- KBH10B (34)
- KBH20 (91)
- KBH20B (34)
- KBK35 (6)
- KC210 (32)
- KC250 (47)
- KC5010 (149)
- KC5020P (18)
- KC5025 (149)
- KC5410 (104)
- KC5510 (64)
- KC5525 (45)
- KC710 (36)
- KC720 (113)
- KC722 (34)
- KC730 (127)
- KC7310 (66)
- KC732 (87)
- KC8050 (100)
- KC810 (115)
- KC850 (121)
- KC9010 (81)
- KC9025 (95)
- KC910 (99)
- KC9105 (92)
- KC9110 (138)
- KC9120 (93)
- KC9125 (115)
- KC9125RR (6)
- KC9140 (67)
- KC9145 (49)
- KC9210 (4)
- KC9215 (66)
- KC9225 (96)
- KC9240 (97)
- KC9240NEW (97)
- KC9245 (66)
- KC9315 (98)
- KC9320 (119)
- KC9325 (86)
- KC935 (122)
- KC950 (100)
- KC990 (86)
- KCD25 (39)
- KCK05 (97)
- KCK05B (90)
- KCK15 (89)
- KCK15B (92)
- KCK20 (125)
- KCK20B (119)
- KCM15 (94)
- KCM15B (86)
- KCM25 (97)
- KCM25B (92)
- KCM25S (14)
- KCM35 (79)
- KCM35B (48)
- KCP05 (94)
- KCP05B (74)
- KCP10 (114)
- KCP10B (122)
- KCP15 (5)
- KCP20S (14)
- KCP25 (116)
- KCP25B (122)
- KCP25C (100)
- KCP30 (96)
- KCP30B (53)
- KCP40 (45)
- KCP40B (63)
- KCPK05 (62)
- KCS10 (37)
- KCS10B (86)
- KCS25S (14)
- KCU10 (136)
- KCU10B (137)
- KCU25 (135)
- KCU25B (114)
- KD050 (56)
- KD081 (61)
- KD100 (42)
- KD120 (55)
- KD1400 (64)
- KD1405 (41)
- KD1425 (74)
- KM1 (22)
- KMF (6)
- KMS (7)
- KN10S (18)
- KS15 (6)
- KT1120 (12)
- KT125 (54)
- KT150 (36)
- KT175 (88)
- KT315 (135)
- KT325 (52)
- KT5020 (13)
- KTP10 (85)
- KTP25S (70)
- KU10 (38)
- KU10T (117)
- KU25T (28)
- KU30T (131)
- KY1310 (36)
- KY1320 (53)
- KY1540 (28)
- KY1615 (48)
- KY2000 (28)
- KY2100 (23)
- KY3000 (59)
- KY3400 (41)
- KY3500 (64)
- KY4000 (20)
- KY4300 (17)
- KY4400 (54)
- KYHK15B (54)
- KYK10 (36)
- KYK25 (41)
- KYK35 (53)
- KYS25 (23)
- KYS30 (33)
- NL200 (10)
- NL250 (62)
- NL300 (27)
- NL400 (14)
- NL920 (52)
- P25 (19)
- PB100 (18)
- PB170 (10)
- PB250 (19)
- PB300 (6)
- PD100 (15)
- PD50 (10)
- PN120 (4)
- PS5 (19)
- SP0819 (28)
- SP0A00 (6)
- SP0G00 (1)
- SP0PW3 (1)
- SP3019 (30)
- SP4019 (41)
- SP4036 (8)
- SP4066 (1)
- SP4093 (8)
- SP61EJ (6)
- SPN3W1 (5)
- THM (68)
- THM-X (29)
- THMF-X (17)
- TN10P (108)
- TN10U (79)
- TN15M (81)
- TN15U (75)
- TN2000 (54)
- TN20K (82)
- TN20P (93)
- TN30M (90)
- TN30P (43)
- TN4000 (45)
- TN5015 (69)
- TN5020 (67)
- TN5105 (73)
- TN5120 (79)
- TN6010 (70)
- TN6025 (81)
- TN7005 (60)
- TN7010 (81)
- TN7015 (81)
- TN7025 (81)
- TN7035 (59)
- TN7105 (57)
- TN7110 (102)
- TN7115 (79)
- TN7125 (68)
- TN7135 (59)
- TN8025 (75)
- TTI15 (37)
- TTM (10)
- TTM09 (23)
- TTR (39)
- TTS (28)
- TTX (38)
- W00342 (12)
- WBH10C (60)
- WBH10P (44)
- WBH10U (63)
- WBH20P (64)
- WBH25P (55)
- WBH25U (47)
- WBH30P (44)
- WBK40U (21)
- WBK45U (42)
- WDN00U (22)
- WDN25U (62)
- WK05CT (84)
- WK15CT (53)
- WK20CT (90)
- WM15CT (88)
- WM25CT (90)
- WM35CT (62)
- WP05CT (14)
- WP15CT (94)
- WP20TT (18)
- WP25CT (94)
- WP35CT (87)
- WS10PT (82)
- WS25PT (81)
- WU05PT (18)
- WU10HT (90)
- WU10PT (80)
- WU25PT (75)
- X00511 (6)
- X00580 (6)
- X00581 (6)
- X00582 (6)
- X00583 (6)
- X00584 (6)
- X00585 (6)
- X00586 (6)
- X00591 (6)
- X00592 (6)
- X00593 (6)
- X00594 (6)
- X00596 (6)
- X00597 (6)
- X00599 (6)
Hand Of Tool
Hand Of Tool
- L (74)
- N (7)
- R (75)
Wiper Insert
Wiper Insert
- N (154)
- Y (44)
F Dimension
F Dimension
- 0.0 mm(6)
- 7.35 mm(1)
- 12.5 mm(35)
- 13.0 mm(1)
- 16.0 mm(38)
- 17.0 mm(8)
- 22.0 mm(39)
- 24.0 mm(2)
- 25.3 mm(1)
- 27.0 mm(8)
- 28.5 mm(2)
to
F Dimension
F Dimension
- 0.0 in(6)
- 0.289 in(1)
- 0.4921 in(35)
- 0.5118 in(1)
- 0.6299 in(37)
- 0.63 in(1)
- 0.6693 in(8)
- 0.8661 in(39)
- 0.9449 in(2)
- 0.9961 in(1)
- 1.063 in(8)
- 1.122 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(19)
- -1.0 mm(3)
- 40.0 mm(24)
- 41.3 mm(8)
- 47.6 mm(8)
- 50.0 mm(8)
- 56.625 mm(8)
- 57.2 mm(3)
- 88.9 mm(16)
- 120.0 mm(1)
- 139.7 mm(8)
- 174.6 mm(8)
- 209.6 mm(3)
- 222.3 mm(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(19)
- -1.0 in(3)
- 1.5748 in(24)
- 1.626 in(8)
- 1.874 in(8)
- 1.9685 in(6)
- 1.969 in(2)
- 2.229 in(8)
- 2.252 in(3)
- 3.5 in(16)
- 4.7244 in(1)
- 5.5 in(8)
- 6.874 in(8)
- 8.252 in(3)
- 8.752 in(3)
- 27.0 in(1)
- 28.0 in(3)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 in(5)
- 393.661 in(23)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(5)
- 9999.0 mm(23)
to
Cutting Direction
Cutting Direction
- B (24)
- E (58)
- S (73)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (78)
- NEGATIVE-ZERO (5)
- NEUTRAL (ZERO) (68)
- POSITIVE-ZERO (5)
Boring Bar Material
Boring Bar Material
- S (32)
frontEnd
Adapter Front-End
Adapter Front-End
- CUTOFF SUPPORT BLADE (4)
- ER COLLET CHUCK (3)
- EXTENSION (1)
- KM MODULAR ADAPTER (18)
- REDUCER (2)
Clamp Style
Clamp Style
- C (8)
- M (65)
- N (23)
- P (5)
- S (35)
- Y (19)
Cutting Width
Cutting Width
- 0.0197 in(9)
- 0.031 in(9)
- 0.0315 in(9)
- 0.035 in(9)
- 0.039 in(9)
- 0.0394 in(19)
- 0.041 in(9)
- 0.047 in(19)
- 0.0472 in(19)
- 0.055 in(9)
- 0.0551 in(9)
- 0.058 in(9)
- 0.059 in(3)
- 0.0591 in(19)
- 0.062 in(19)
- 0.0669 in(9)
- 0.067 in(9)
- 0.0689 in(19)
- 0.072 in(10)
- 0.076 in(9)
- 0.0768 in(9)
- 0.077 in(9)
- 0.078 in(14)
- 0.0787 in(19)
- 0.079 in(18)
- 0.083 in(4)
- 0.084 in(4)
- 0.0866 in(19)
- 0.088 in(19)
- 0.0886 in(14)
- 0.094 in(20)
- 0.097 in(11)
- 0.098 in(1)
- 0.0984 in(19)
- 0.103 in(1)
- 0.105 in(10)
- 0.108 in(19)
- 0.1083 in(19)
- 0.11 in(10)
- 0.118 in(24)
- 0.1181 in(23)
- 0.119 in(5)
- 0.12 in(5)
- 0.122 in(15)
- 0.123 in(5)
- 0.125 in(28)
- 0.126 in(23)
- 0.1278 in(9)
- 0.128 in(19)
- 0.129 in(9)
- 0.13 in(5)
- 0.131 in(5)
- 0.1378 in(23)
- 0.142 in(10)
- 0.147 in(5)
- 0.15 in(4)
- 0.151 in(9)
- 0.156 in(10)
- 0.157 in(14)
- 0.1574 in(14)
- 0.1575 in(18)
- 0.158 in(4)
- 0.161 in(4)
- 0.162 in(4)
- 0.167 in(14)
- 0.1673 in(10)
- 0.169 in(10)
- 0.1771 in(14)
- 0.1772 in(14)
- 0.178 in(10)
- 0.185 in(12)
- 0.187 in(4)
- 0.1875 in(4)
- 0.188 in(14)
- 0.189 in(14)
- 0.192 in(5)
- 0.193 in(9)
- 0.195 in(10)
- 0.196 in(10)
- 0.1969 in(4)
- 0.197 in(6)
- 0.198 in(2)
- 0.199 in(2)
- 0.201 in(2)
- 0.202 in(6)
- 0.213 in(4)
- 0.2165 in(4)
- 0.2166 in(2)
- 0.219 in(4)
- 0.2362 in(4)
- 0.25 in(4)
- 0.256 in(4)
to
Cutting Width
Cutting Width
- 0.5 mm(9)
- 0.787 mm(9)
- 0.8 mm(9)
- 0.889 mm(9)
- 0.991 mm(9)
- 1.0 mm(19)
- 1.041 mm(9)
- 1.19 mm(14)
- 1.194 mm(19)
- 1.199 mm(5)
- 1.2 mm(19)
- 1.39 mm(9)
- 1.397 mm(9)
- 1.4 mm(9)
- 1.473 mm(9)
- 1.49 mm(3)
- 1.5 mm(22)
- 1.57 mm(14)
- 1.575 mm(19)
- 1.69 mm(9)
- 1.7 mm(9)
- 1.702 mm(9)
- 1.75 mm(19)
- 1.829 mm(10)
- 1.94 mm(9)
- 1.95 mm(9)
- 1.956 mm(9)
- 1.981 mm(10)
- 1.99 mm(4)
- 2.0 mm(23)
- 2.007 mm(9)
- 2.12 mm(4)
- 2.13 mm(4)
- 2.2 mm(19)
- 2.235 mm(19)
- 2.236 mm(5)
- 2.24 mm(9)
- 2.25 mm(14)
- 2.38 mm(1)
- 2.387 mm(5)
- 2.388 mm(20)
- 2.39 mm(5)
- 2.464 mm(11)
- 2.49 mm(1)
- 2.5 mm(20)
- 2.62 mm(1)
- 2.667 mm(10)
- 2.74 mm(9)
- 2.743 mm(19)
- 2.75 mm(19)
- 2.794 mm(10)
- 2.997 mm(19)
- 3.0 mm(28)
- 3.05 mm(5)
- 3.099 mm(10)
- 3.1 mm(5)
- 3.11 mm(5)
- 3.12 mm(5)
- 3.13 mm(5)
- 3.17 mm(10)
- 3.175 mm(28)
- 3.18 mm(11)
- 3.2 mm(23)
- 3.245 mm(9)
- 3.25 mm(10)
- 3.251 mm(19)
- 3.27 mm(9)
- 3.3 mm(5)
- 3.32 mm(5)
- 3.329 mm(5)
- 3.5 mm(23)
- 3.607 mm(10)
- 3.73 mm(5)
- 3.81 mm(4)
- 3.835 mm(5)
- 3.84 mm(9)
- 3.96 mm(10)
- 3.962 mm(10)
- 3.974 mm(5)
- 3.988 mm(10)
- 4.0 mm(18)
- 4.1 mm(4)
- 4.11 mm(4)
- 4.12 mm(4)
- 4.242 mm(14)
- 4.25 mm(10)
- 4.3 mm(10)
- 4.5 mm(14)
- 4.521 mm(10)
- 4.699 mm(12)
- 4.76 mm(4)
- 4.761 mm(4)
- 4.762 mm(4)
- 4.775 mm(14)
- 4.78 mm(2)
- 4.785 mm(2)
- 4.788 mm(2)
- 4.8 mm(10)
- 4.801 mm(14)
- 4.81 mm(10)
- 4.88 mm(5)
- 4.9 mm(9)
- 4.95 mm(10)
- 4.953 mm(5)
- 4.978 mm(10)
- 5.0 mm(6)
- 5.004 mm(4)
- 5.05 mm(2)
- 5.1 mm(2)
- 5.12 mm(2)
- 5.13 mm(2)
- 5.131 mm(4)
- 5.41 mm(4)
- 5.5 mm(4)
- 5.563 mm(4)
- 6.0 mm(4)
- 6.35 mm(4)
- 6.36 mm(2)
- 6.502 mm(4)
to
Front End Type
Front End Type
- KMM - KM Micro System (6)
- KMS - KM TBD System (15)
- PMK - Prismatic Adapter Kenna (4)
- SZK - Collet Taper (3)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (16)
- D-DIAMOND/RHOMBIC 55 (35)
- LT-TRIANGLE LAY DOWN THREAD 60 (12)
- PRISMATIC (19)
- R-ROUND (4)
- S-SQUARE 90 (7)
- T-TRIANGLE 60 (13)
- TN-TOP NOTCH (23)
- V-DIAMOND/RHOMBIC 35 (17)
- W-TRIGON 80 (10)
Front End Style
Front End Style
- KMM01 Std Km-Micro Size (4)
- KMM02 Enlarged Flange (2)
- KMS-01 Std KM-TBD NotOnCntr (6)
- KMS-02 Englarged Flange OnCntr (9)
- PMK03 CutOffBld A1-A3 Hlfw/Pin (4)
- SZK02 Collets 8 Degree Taper (3)
Insert Size
Insert Size
- 1 (3)
- 2 (13)
- 2B (1)
- 3 (15)
- 4 (8)
- 5 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 in(13)
- 0.138 in(1)
- 0.1382 in(4)
- 0.2098 in(4)
- 0.21 in(1)
- 0.3543 in(1)
- 0.403 in(2)
- 0.4035 in(1)
- 0.5315 in(1)
- 0.532 in(2)
- 0.5512 in(11)
- 0.748 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(13)
- 3.51 mm(5)
- 5.33 mm(5)
- 9.0 mm(1)
- 10.25 mm(3)
- 13.5 mm(3)
- 14.0 mm(11)
- 19.0 mm(1)
to
Gage Length
Gage Length
- 0.1890 in(2)
- 0.7090 in(1)
- 0.7874 in(1)
- 0.9840 in(5)
- 0.9843 in(2)
- 1.1028 in(2)
- 1.1810 in(2)
- 1.3780 in(1)
- 1.5748 in(1)
- 1.7717 in(1)
- 2.3622 in(1)
- 3.0000 in(1)
- 3.5160 in(1)
- 3.8190 in(2)
- 3.9370 in(2)
- 4.7244 in(1)
- 4.8190 in(2)
Gage Length
Gage Length
- 4.8000 mm(2)
- 18.0000 mm(1)
- 20.0000 mm(1)
- 25.0000 mm(5)
- 28.0120 mm(2)
- 30.0000 mm(2)
- 35.0000 mm(1)
- 40.0000 mm(1)
- 45.0000 mm(1)
- 60.0000 mm(1)
- 76.2000 mm(1)
- 89.3100 mm(1)
- 90.0000 mm(2)
- 97.0000 mm(2)
- 100.0000 mm(2)
- 120.0000 mm(1)
- 122.4000 mm(2)
Front End Size
Front End Size
- 20.0 in(4)
- 25.0 in(8)
- 32.0 in(6)
to
Front End Size
Front End Size
- 20.0 mm(4)
- 25.0 mm(8)
- 32.0 mm(6)
to
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (109)
- B L (101)
- C A (56)
- C N (85)
- D P (92)
- H T (135)
- H W (154)
backEnd
Connection Type
Connection Type
- TAPER SHANK (156)
System Size
System Size
- KM20 (52)
- KM25 (76)
- KM3225 (38)
Back-End Diameter
Back-End Diameter
- 18.0 mm(1)
- 19.05 mm(1)
- 20.0 mm(53)
- 24.0 mm(1)
- 25.0 mm(76)
- 25.4 mm(1)
- 31.75 mm(1)
- 32.0 mm(37)
- 38.1 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.7087 in(1)
- 0.75 in(1)
- 0.7874 in(1)
- 0.9449 in(1)
- 0.9843 in(5)
- 1.0 in(1)
- 1.25 in(1)
- 1.2598 in(5)
- 1.5 in(1)
to
other
Insert Hand
Insert Hand
- L (61)
- N (119)
- R (59)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
