Mill 4-12KT左勝手インサート
カスタムソリューションの溝加工カッターは、最大の安定性と精度を実現します。
カスタムソリューションの溝加工カッターは、ご要望に応じてご用意します。
[an error occurred while processing this directive]
404エラー - ページが見つかりません!
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404エラー - ページが見つかりません!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Mill 4-12kt
Read More
接線方向ショルダーミーリング
- Mill 4-12KTは所要動力が最大で15%低いため、小型の機械でもフィード量を増やすことができます。
- 三角形のマージンを特長とする特許取得済みのインサート設計により、鋼と鋳鉄のアプリケーションで前例のない安定性を実現します。
- 軸方向の振れが最小限に抑えられるため、優れた床面仕上げが可能です。
- このプログラムでは7種類の材種、7種類のコーナーRを備え、最大0.472"（12 mm）の切り込み量により、幅広いショルダーミーリングアプリケーションに対応する汎用性を提供します。
動作中のMill 4-12KTを見る！
径方向に取り付け
大型のポケットを必要とし、カッターコアサイズが縮小。
非常に小さい径のカッター本体に対応。
インサート用ねじへのアクセスが困難な場合がある。
接線方向に取り付け
浅いポケットにより、大型のカッターコアサイズに対応。
非常に強力な切れ刃。
インサート用ねじへのアクセスが容易。
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (82)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(82)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(73)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(82)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(73)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(73)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(73)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(73)
- M Stainless Steel (81)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(81)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(81)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(81)
- K Cast Iron (72)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(72)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(72)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(72)
- S High-Temp Alloys (81)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(72)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(72)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(81)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(72)
- H Hardened Materials (48)
- H1Hardened Materials 44-48 HRC(48)
Applications
Applications
Face Milling (40)
Shoulder Milling (40)
Cutting Diameter
Cutting Diameter
- 1.9685 in(3)
- 2.0 in(3)
- 2.4803 in(4)
- 2.5 in(3)
- 3.0 in(3)
- 3.1496 in(3)
- 3.937 in(3)
- 4.0 in(3)
- 4.9213 in(3)
- 5.0 in(3)
- 6.0 in(3)
- 6.2992 in(3)
- 7.874 in(2)
- 8.0 in(1)
to
Cutting Diameter
Cutting Diameter
- 50.0 mm(3)
- 50.8 mm(3)
- 63.0 mm(4)
- 63.5 mm(3)
- 76.2 mm(3)
- 80.0 mm(3)
- 100.0 mm(3)
- 101.6 mm(3)
- 125.0 mm(3)
- 127.0 mm(3)
- 152.4 mm(3)
- 160.0 mm(3)
- 200.0 mm(2)
- 203.2 mm(1)
to
Cutting Length
Cutting Length
- 12.135 mm(6)
- 12.143 mm(3)
- 12.144 mm(18)
- 12.145 mm(6)
- 12.146 mm(7)
to
Cutting Length
Cutting Length
- 0.4777 in(3)
- 0.4778 in(3)
- 0.4781 in(25)
- 0.4782 in(9)
to
Reach
Reach
- 1.5 in(3)
- 1.5748 in(7)
- 1.75 in(6)
- 1.9685 in(6)
- 2.0 in(3)
- 2.375 in(7)
- 2.4803 in(8)
to
Reach
Reach
- 38.1 mm(3)
- 40.0 mm(7)
- 44.45 mm(6)
- 50.0 mm(6)
- 50.8 mm(3)
- 60.325 mm(7)
- 63.0 mm(8)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (40)
to
Connection Style
Connection Style
- A-Socket Head Cap Screw (29)
- B-Cutter Retention Screw (5)
- C-Bolt Circle (6)
Number of Flutes
Number of Flutes
- 10 (2)
- 11 (4)
- 12 (4)
- 14 (2)
- 16 (6)
- 18 (2)
- 22 (1)
- 4 (2)
- 5 (4)
- 6 (4)
- 7 (3)
- 8 (4)
- 9 (2)
Over All Length [L]
Over All Length [L]
- 1.5 in(3)
- 1.5748 in(7)
- 1.75 in(6)
- 1.9685 in(6)
- 2.0 in(3)
- 2.375 in(7)
- 2.4803 in(8)
to
Over All Length [L]
Over All Length [L]
- 38.1 mm(3)
- 40.0 mm(7)
- 44.45 mm(6)
- 50.0 mm(6)
- 50.8 mm(3)
- 60.325 mm(7)
- 63.0 mm(8)
to
Corner Radius
Corner Radius
- 0.016 in(46)
- 0.031 in(67)
- 0.047 in(51)
- 0.061 in(56)
- 0.078 in(49)
- 0.094 in(45)
- 0.125 in(46)
to
Corner Radius
Corner Radius
- 0.4 mm(46)
- 0.8 mm(67)
- 1.2 mm(51)
- 1.55 mm(56)
- 1.975 mm(49)
- 2.375 mm(45)
- 3.175 mm(46)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC522M (51)
- KC725M (47)
- KCK15 (47)
- KCK20 (40)
- KCK20B (52)
- KCPK30 (53)
- KCPM40 (56)
- KCSM40 (54)
- X00626 (40)
Hand Of Tool
Hand Of Tool
- R (40)
Wiper Insert
Wiper Insert
- N (80)
Maximum Ramp Angle
Maximum Ramp Angle
- 0.008 (3)
- 0.01 (3)
- 0.011 (3)
- 0.013 (6)
- 0.016 (6)
- 0.02 (3)
- 0.021 (3)
- 0.026 (7)
- 0.041 (3)
- 0.042 (3)
to
frontEnd
Insert Shape
Insert Shape
- L-RECTANGLE 90 (5)
- L-RECTANGLE ON EDGE 90 (115)
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
- L-RECTANGLE 90 (5)
- L-RECTANGLE ON EDGE 90 (75)
Chip Breaker CBMD
Chip Breaker CBMD
- GE (62)
- HD (12)
- PU (6)
Cutting Tool Material
Cutting Tool Material
- H W (80)
Tolerance Class
Tolerance Class
- G (74)
- P (6)
backEnd
Connection Type
Connection Type
- SHELL MILL (40)
Back-End Diameter
Back-End Diameter
- 19.05 mm(3)
- 22.0 mm(7)
- 25.4 mm(6)
- 27.0 mm(3)
- 31.75 mm(3)
- 32.0 mm(3)
- 38.1 mm(3)
- 40.0 mm(6)
- 50.8 mm(3)
- 60.0 mm(2)
- 63.5 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.75 in(3)
- 0.8661 in(5)
- 0.8666 in(2)
- 1.0 in(6)
- 1.063 in(1)
- 1.0634 in(2)
- 1.25 in(3)
- 1.2598 in(1)
- 1.26 in(1)
- 1.2603 in(1)
- 1.5 in(3)
- 1.5748 in(4)
- 1.575 in(1)
- 1.5753 in(1)
- 2.0 in(3)
- 2.36 in(1)
- 2.363 in(1)
- 2.5 in(1)
to
other
Insert Hand
Insert Hand
- L (27)
- R (53)
Number of Inserts
Number of Inserts
- 4.0 (2)
- 5.0 (4)
- 6.0 (4)
- 7.0 (3)
- 8.0 (4)
- 9.0 (2)
- 10.0 (2)
- 11.0 (4)
- 12.0 (4)
- 14.0 (2)
- 16.0 (6)
- 18.0 (2)
- 22.0 (1)
to
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
