[an error occurred while processing this directive]
Error 404: Página no encontrada
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Error 404: Página no encontrada
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Error 404: Página no encontrada
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Error 404: Página no encontrada
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Error 404: Página no encontrada
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Error 404: Página no encontrada
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Error 404: Página no encontrada
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Error 404: Página no encontrada
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Error 404: Página no encontrada
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Error 404: Página no encontrada
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
eBore™
Micrón por micrón – El ajuste de precisión de cada herramienta es tan fácil como 1, 2, 3.
El sistema de mandrinado eBore cubre un rango de diámetros de 6–1020 mm proporcionando soluciones de herramientas de mandrinado fino de última generación que tienen una cosa en común: todas ellas están listas para ser digitales.
La pantalla digital de eBore ofrece la opción de reajustar la herramienta del husillo, reduciendo el tiempo de configuración y el tiempo de inactividad.
Uno para todos - Una pantalla digital eBore que sirve todas las herramientas de mandrinado fino eBore.
Micrón por micrón, el ajuste de precisión de cada herramienta es tan fácil como 1, 2, 3.
eBore Digital Display
Características de eBore™
- Dial para ajuste manual.
- Actualización de analógico a digital posible.
- Versatilidad a través de varias opciones de herramientas de mandrinado fino.
- Rango de diámetros de 6-1020 mm.
- Precisión de mandrinado fino con facilidad.
- Ajuste de cada micrón de herramienta por micrones.
- Reajuste de herramienta en el husillo.
Información de aplicación
Examine productos eBore™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (44)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
- M Stainless Steel (44)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(44)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(44)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(44)
- K Cast Iron (39)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(39)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(39)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(39)
- N Non-Ferrous Materials (39)
- N1Wrought Aluminum (39)
- N6Carbon, Graphite Composites, CFRP (39)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(39)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (39)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (39)
- N3High-Silicon Aluminum Alloys Si >12.2%(39)
- N7MMC's (39)
- S High-Temp Alloys (44)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(44)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
- H Hardened Materials (39)
- H3Hardened Materials 56-60 HRC(39)
- H4Hardened Materials >60 HRC(39)
- H1Hardened Materials 44-48 HRC(39)
- H2Hardened Materials 48-55 HRC(39)
- C CFRP Materials (39)
- C1CFRP, CFRP / CFRP (39)
- C2CFRP / Aluminium CFRP / Non-Ferrous (39)
Applications
Applications
Blind & Cross Hole Finishing (71)
Blind Hole Finishing (71)
Through & Cross Hole Finishing (71)
Through Hole Finishing (71)
Cutting Condition Material
Cutting Condition Material
- H-All (39)
- K-All (39)
- M-All (44)
- N-All (39)
- P-All (44)
- S-All (44)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (39)
- Lightly Interrupted Cut (44)
- Smooth Cut (44)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (12)
- 91.0 (8)
- 92.0 (23)
to
Connection Style
Connection Style
- E-BORE Boring Bar (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (17)
- 2.0 (17)
- 3.0 (5)
- 4.0 (17)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.3602 in(1)
- 0.3943 in(1)
- 0.4941 in(3)
- 0.5728 in(2)
- 0.5911 in(1)
- 0.6514 in(2)
- 0.6709 in(1)
- 0.6711 in(2)
- 0.8091 in(1)
- 0.8139 in(2)
- 0.9998 in(1)
- 1.2052 in(1)
- 1.2076 in(3)
- 1.7714 in(1)
- 1.8894 in(1)
- 2.086 in(1)
- 2.0863 in(1)
- 2.1651 in(1)
- 2.2654 in(1)
- 2.2829 in(2)
- 2.4797 in(1)
- 2.6766 in(1)
- 2.6769 in(1)
- 2.8734 in(1)
- 3.0705 in(1)
- 3.2674 in(1)
- 3.6611 in(2)
- 3.8579 in(2)
- 4.4485 in(2)
- 4.8422 in(1)
- 5.6296 in(1)
to
Over All Length [L]
Over All Length [L]
- 9.149 mm(1)
- 10.015 mm(1)
- 12.6 mm(3)
- 14.55 mm(1)
- 14.6 mm(1)
- 15.015 mm(1)
- 16.5 mm(2)
- 17.0 mm(3)
- 20.6 mm(1)
- 20.7 mm(2)
- 25.4 mm(1)
- 30.6 mm(1)
- 30.7 mm(3)
- 44.993 mm(1)
- 47.992 mm(1)
- 52.985 mm(1)
- 52.993 mm(1)
- 54.993 mm(1)
- 57.5 mm(1)
- 57.985 mm(2)
- 62.985 mm(1)
- 67.985 mm(1)
- 67.993 mm(1)
- 72.985 mm(1)
- 77.992 mm(1)
- 82.992 mm(1)
- 92.991 mm(1)
- 92.992 mm(1)
- 97.992 mm(2)
- 112.992 mm(2)
- 122.992 mm(1)
- 142.992 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(3)
- 0.001 in(32)
- 0.002 in(32)
- 0.004 in(44)
- 0.008 in(39)
- 0.016 in(39)
- 0.031 in(39)
- 0.047 in(10)
- 0.063 in(3)
to
Corner Radius
Corner Radius
- 0.0 mm(3)
- 0.025 mm(32)
- 0.05 mm(32)
- 0.1 mm(44)
- 0.2 mm(39)
- 0.4 mm(39)
- 0.8 mm(39)
- 1.2 mm(10)
- 1.6 mm(3)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(23)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(23)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (39)
- HK1500 (32)
- HK35 (36)
- HT2 (39)
- HTX (39)
- HWK15 (39)
- K10M (36)
- K10P (36)
- K10U (32)
- K15U (32)
- K20K (36)
- K25M (29)
- K313 (39)
- K68 (39)
- KB1345 (10)
- KB1610 (32)
- KB1630 (39)
- KB5610 (32)
- KB5625 (32)
- KB5630 (32)
- KB9610 (32)
- KBH10 (32)
- KBH20 (39)
- KC5010 (39)
- KC5025 (39)
- KC5410 (39)
- KC720 (39)
- KC730 (39)
- KC732 (39)
- KC8050 (39)
- KC810 (39)
- KC850 (39)
- KC9010 (32)
- KC9025 (39)
- KC910 (39)
- KC9105 (39)
- KC9110 (39)
- KC9120 (32)
- KC9125 (39)
- KC9225 (39)
- KC9240 (39)
- KC9240NEW (39)
- KC9315 (39)
- KC9320 (39)
- KC9325 (39)
- KC935 (39)
- KC950 (32)
- KC990 (32)
- KCD25 (39)
- KCK05 (39)
- KCK05B (32)
- KCK15 (39)
- KCK15B (39)
- KCK20 (39)
- KCK20B (39)
- KCM15 (39)
- KCM15B (39)
- KCM25 (39)
- KCM25B (39)
- KCM25S (32)
- KCM35 (39)
- KCM35B (3)
- KCP05 (39)
- KCP05B (3)
- KCP10 (39)
- KCP10B (39)
- KCP20S (32)
- KCP25 (39)
- KCP25B (39)
- KCP25C (39)
- KCP30 (39)
- KCP30B (10)
- KCS10 (39)
- KCS10B (39)
- KCS25S (32)
- KCU10 (44)
- KCU10B (39)
- KCU25 (39)
- KCU25B (39)
- KD050 (32)
- KD081 (32)
- KD1400 (32)
- KD1425 (32)
- KN10S (32)
- KT175 (32)
- KT315 (39)
- KT325 (39)
- KTP10 (32)
- KTP25S (32)
- KU10 (32)
- KU10T (39)
- KU30T (39)
- NL300 (7)
- NL920 (7)
- PB100 (29)
- PB170 (36)
- PB250 (36)
- PB300 (29)
- PD100 (39)
- PD50 (36)
- SP0PW3 (7)
- SP4019 (7)
- SPN3W1 (3)
- THM (39)
- THM-X (39)
- TN1000 (29)
- TN10P (39)
- TN10U (39)
- TN15M (39)
- TN15U (32)
- TN2000 (39)
- TN20K (39)
- TN20P (39)
- TN30M (39)
- TN4000 (32)
- TN5015 (39)
- TN5020 (39)
- TN5105 (39)
- TN5120 (39)
- TN6010 (10)
- TN6025 (3)
- TN7005 (3)
- TN7010 (39)
- TN7015 (39)
- TN7025 (39)
- TN7035 (39)
- TN7105 (39)
- TN7110 (39)
- TN7115 (39)
- TN7125 (39)
- TN7135 (39)
- TN8025 (39)
- TTI15 (32)
- TTM (3)
- TTR (39)
- TTS (32)
- TTX (3)
- W00342 (7)
- WBH10C (32)
- WBH10P (32)
- WBH10U (32)
- WBH20P (10)
- WBH25P (32)
- WBH30P (3)
- WBK45U (10)
- WDN00U (32)
- WDN25U (32)
- WK05CT (39)
- WK15CT (39)
- WK20CT (39)
- WM15CT (39)
- WM25CT (39)
- WP15CT (39)
- WP20TT (29)
- WP25CT (39)
- WP35CT (10)
- WS10PT (39)
- WS25PT (32)
- WU05PT (39)
- WU10HT (39)
- WU10PR (4)
- WU10PT (39)
- WU20HT (29)
- WU25PT (39)
Hand Of Tool
Hand Of Tool
- R (21)
Wiper Insert
Wiper Insert
- N (22)
Drilling Condition Material
Drilling Condition Material
- M-All (1)
- P-All (1)
- S-All (1)
F Dimension
F Dimension
- 0.1504 mm(1)
- 2.821 mm(2)
- 3.821 mm(1)
- 4.749 mm(1)
- 4.769 mm(3)
- 5.761 mm(2)
- 5.769 mm(1)
- 6.762 mm(2)
- 6.769 mm(2)
- 7.319 mm(1)
- 7.762 mm(1)
- 7.769 mm(2)
- 9.763 mm(1)
- 12.265 mm(1)
to
F Dimension
F Dimension
- 0.1111 in(2)
- 0.1504 in(2)
- 0.187 in(1)
- 0.1878 in(3)
- 0.2268 in(2)
- 0.2271 in(1)
- 0.2662 in(2)
- 0.2665 in(2)
- 0.2881 in(1)
- 0.3056 in(1)
- 0.3059 in(2)
- 0.4829 in(1)
- 0.6844 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 2.0 mm(1)
- 6.0 mm(2)
- 8.0 mm(2)
- 10.0 mm(4)
- 12.0 mm(3)
- 14.0 mm(4)
- 15.0 mm(1)
- 16.0 mm(3)
- 19.5 mm(1)
- 20.0 mm(1)
- 22.5 mm(1)
- 24.5 mm(1)
- 25.0 mm(1)
- 25.5 mm(1)
- 29.0 mm(2)
- 36.0 mm(2)
- 40.0 mm(1)
- 43.0 mm(1)
- 52.0 mm(1)
- 53.0 mm(1)
- 65.0 mm(2)
- 68.0 mm(1)
- 76.0 mm(1)
- 82.0 mm(1)
- 100.0 mm(1)
- 125.0 mm(1)
- 200.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.08 in(1)
- 0.2362 in(1)
- 0.2363 in(1)
- 0.315 in(2)
- 0.3937 in(4)
- 0.4724 in(3)
- 0.5511 in(2)
- 0.5512 in(2)
- 0.5906 in(1)
- 0.6299 in(3)
- 0.7677 in(1)
- 0.7874 in(1)
- 0.8858 in(1)
- 0.9646 in(1)
- 0.9843 in(1)
- 1.0039 in(1)
- 1.1417 in(2)
- 1.4173 in(2)
- 1.5748 in(1)
- 1.6929 in(1)
- 2.0472 in(1)
- 2.0866 in(1)
- 2.5591 in(2)
- 2.6772 in(1)
- 2.9921 in(1)
- 3.2283 in(1)
- 3.937 in(1)
- 4.9213 in(1)
- 7.874 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.315 in(2)
- 0.3937 in(2)
- 0.472 in(2)
- 0.4724 in(2)
- 0.5511 in(2)
- 0.5512 in(1)
- 0.6299 in(4)
- 0.7874 in(4)
- 0.9055 in(1)
- 0.9843 in(1)
- 1.0236 in(1)
- 1.1811 in(2)
- 1.4567 in(2)
- 1.6142 in(1)
- 1.7323 in(1)
- 2.0866 in(1)
- 2.126 in(1)
- 2.28 in(1)
- 2.5984 in(2)
- 3.0315 in(1)
- 3.2677 in(1)
- 4.0157 in(1)
- 4.0551 in(1)
- 5.1181 in(1)
- 5.9843 in(1)
- 8.0709 in(1)
- 8.071 in(1)
- 40.1575 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 8.0 mm(2)
- 10.0 mm(2)
- 12.0 mm(4)
- 14.0 mm(3)
- 16.0 mm(4)
- 20.0 mm(4)
- 23.0 mm(1)
- 25.0 mm(1)
- 26.0 mm(1)
- 30.0 mm(2)
- 37.0 mm(2)
- 41.0 mm(1)
- 44.0 mm(1)
- 53.0 mm(1)
- 54.0 mm(1)
- 58.0 mm(1)
- 66.0 mm(2)
- 77.0 mm(1)
- 83.0 mm(1)
- 102.0 mm(1)
- 103.0 mm(1)
- 130.0 mm(1)
- 152.0 mm(1)
- 205.0 mm(2)
- 1020.0 mm(2)
to
Cutting Direction
Cutting Direction
- E (21)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (21)
Maximum Bore Depth
Maximum Bore Depth
- 0.7871 in(1)
- 0.9052 in(1)
- 1.1021 in(1)
- 1.1043 in(1)
- 1.1808 in(1)
- 1.2986 in(1)
- 1.338 in(1)
- 1.5742 in(1)
- 1.6926 in(1)
- 1.6948 in(1)
- 1.9064 in(1)
- 2.165 in(1)
- 2.2766 in(1)
- 2.7556 in(2)
- 2.9524 in(2)
- 3.543 in(2)
- 3.9367 in(1)
- 4.7241 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 19.993 mm(1)
- 22.992 mm(1)
- 27.993 mm(1)
- 28.048 mm(1)
- 29.993 mm(1)
- 32.985 mm(1)
- 33.985 mm(1)
- 39.985 mm(1)
- 42.993 mm(1)
- 43.048 mm(1)
- 48.423 mm(1)
- 54.992 mm(1)
- 57.827 mm(1)
- 69.992 mm(2)
- 74.991 mm(1)
- 74.992 mm(1)
- 89.992 mm(2)
- 99.992 mm(1)
- 119.992 mm(1)
to
Boring Bar Material
Boring Bar Material
- S (21)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (39)
- W-TRIGON 80 (4)
- X-TRIGON 82 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.1575 in(2)
- 0.1969 in(2)
- 0.236 in(2)
- 0.2362 in(2)
- 0.2756 in(3)
- 0.315 in(4)
- 0.3937 in(4)
- 0.4922 in(1)
- 0.5906 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 4.0 mm(2)
- 5.0 mm(2)
- 6.0 mm(4)
- 7.0 mm(3)
- 8.0 mm(4)
- 10.0 mm(4)
- 12.5 mm(1)
- 15.0 mm(1)
to
Gage Length
Gage Length
- 0.5748 in(1)
- 0.6299 in(3)
- 1.1614 in(1)
- 1.7717 in(1)
- 1.8898 in(1)
- 2.6772 in(1)
- 2.7559 in(4)
- 2.8346 in(1)
- 2.8347 in(1)
- 2.9921 in(1)
- 2.9922 in(1)
- 3.2283 in(1)
- 3.3071 in(1)
- 3.3465 in(4)
- 3.3585 in(1)
- 3.3858 in(2)
- 3.5433 in(1)
- 3.7008 in(1)
- 3.9370 in(1)
- 4.0157 in(2)
- 4.0945 in(2)
- 4.3307 in(4)
- 4.4882 in(1)
- 4.7244 in(1)
- 5.1181 in(2)
- 5.1969 in(1)
- 5.4332 in(2)
- 5.8268 in(1)
- 6.2992 in(1)
Gage Length
Gage Length
- 14.6000 mm(1)
- 16.0000 mm(3)
- 29.5000 mm(1)
- 45.0000 mm(1)
- 48.0000 mm(1)
- 68.0000 mm(1)
- 70.0000 mm(4)
- 72.0000 mm(1)
- 72.0020 mm(1)
- 76.0000 mm(1)
- 76.0010 mm(1)
- 82.0000 mm(1)
- 84.0000 mm(1)
- 85.0000 mm(4)
- 86.0000 mm(3)
- 90.0000 mm(1)
- 94.0000 mm(1)
- 100.0000 mm(1)
- 102.0000 mm(2)
- 104.0000 mm(2)
- 110.0000 mm(4)
- 114.0000 mm(1)
- 120.0000 mm(1)
- 130.0000 mm(2)
- 133.0000 mm(1)
- 138.0030 mm(2)
- 148.0000 mm(1)
- 160.0000 mm(1)
insertGeometry
Shape
Shape
- X-TRIGON 82 (1)
Insert IC Size
Insert IC Size
- 3.975 mm(1)
to
Insert IC Size
Insert IC Size
- 0.156 in(1)
to
Cutting Edge Length
Cutting Edge Length
- 3.445 mm(1)
to
Cutting Edge Length
Cutting Edge Length
- 0.1356 in(1)
to
Cutting Tool Material
Cutting Tool Material
- B H (39)
- B L (39)
- C N (32)
- D P (39)
- H T (39)
- H W (39)
Tolerance Class
Tolerance Class
- G (1)
backEnd
System Size
System Size
- HSK63A (10)
- KM32TS (4)
- KM40TS (2)
- KM50TS (5)
- KM63TS (2)
- KM80TS (5)
Back-End Diameter
Back-End Diameter
- 16.0 mm(28)
- 18.0 mm(1)
- 20.0 mm(1)
- 25.0 mm(1)
- 32.0 mm(4)
- 40.0 mm(2)
- 50.0 mm(5)
- 60.0 mm(6)
- 63.0 mm(12)
- 80.0 mm(5)
to
Back-End Diameter
Back-End Diameter
- 0.6299 in(7)
- 0.7087 in(1)
- 0.7874 in(1)
- 0.9843 in(1)
- 1.2579 in(2)
- 1.2598 in(2)
- 1.5728 in(1)
- 1.5748 in(1)
- 1.9665 in(2)
- 1.9685 in(3)
- 2.3622 in(6)
- 2.4803 in(12)
- 3.1476 in(3)
- 3.1496 in(2)
to
other
Insert Hand
Insert Hand
- L (32)
- N (39)
- R (44)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
