[an error occurred while processing this directive]
Chyba 404 – stránka nenalezena!
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Chyba 404 – stránka nenalezena!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Chyba 404 – stránka nenalezena!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Chyba 404 – stránka nenalezena!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Chyba 404 – stránka nenalezena!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Chyba 404 – stránka nenalezena!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Chyba 404 – stránka nenalezena!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Chyba 404 – stránka nenalezena!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Chyba 404 – stránka nenalezena!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Chyba 404 – stránka nenalezena!
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Vibration-Free Boring Bars
Read More
Coupled with our bolt-on heads, the Vibration-Free boring bars provide stability and rigidity when boring at extended overhangs up to 10 x D.
Vibration-Free boring bars are a plug-and-play solution designed to work out of the box with no manual adjusting required or possible. The internal dampening package is designed to provide process stability by increasing the stiffness of the bar and dampening out chatter. These Vibration-Free boring bars utilize a new portfolio of bolt-on heads that connect to the bar by a serrated design.
Heads for Top Notch Inserts & LT Threading Inserts
Heads for Screw-On Inserts
Heads for D Style Inserts
Heads for P Style Inserts
View Vibration-Free Boring Bar Products
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (104)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(104)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(104)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(104)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(104)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(104)
- M Stainless Steel (104)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(104)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(104)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(104)
- K Cast Iron (104)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(104)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
- N Non-Ferrous Materials (97)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (97)
- N6Carbon, Graphite Composites, CFRP (96)
- N7MMC's (76)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (96)
- N1Wrought Aluminum (97)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(96)
- N3High-Silicon Aluminum Alloys Si >12.2%(62)
- S High-Temp Alloys (104)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(104)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(104)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(104)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(104)
- H Hardened Materials (92)
- H1Hardened Materials 44-48 HRC(92)
- H4Hardened Materials >60 HRC(76)
- H2Hardened Materials 48-55 HRC(92)
- H3Hardened Materials 56-60 HRC(86)
- C CFRP Materials (86)
- C1CFRP, CFRP / CFRP (86)
- C2CFRP / Aluminium CFRP / Non-Ferrous (76)
Applications
Applications
Back Boring (34)
Face Grooving (8)
ID Facing (20)
ID Grooving (45)
ID Thread Turning (11)
TRN Boring (45)
Cutting Condition Material
Cutting Condition Material
- H-All (86)
- K-All (96)
- K1 (16)
- M-All (96)
- N-All (86)
- P-All (96)
- S-All (94)
- S2 (46)
- S4 (22)
Type of Thread
Type of Thread
- 55 (6)
- 60 (16)
- ACME (17)
- API (13)
- API BUTTRESS (2)
- API RD (13)
- BSPT (4)
- BSW (14)
- BUTTRESS (10)
- M (14)
- NPT (12)
- NPTF (4)
- RD DIN 405 (6)
- STUB ACME (14)
- TR DIN 103 (6)
- UN (14)
- UNJ (12)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (96)
- Lightly Interrupted Cut (96)
- Smooth Cut (96)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 62.5 (2)
- 90.0 (34)
- 93.0 (34)
- 95.0 (32)
to
Connection Style
Connection Style
- Bolt-On Head (104)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (2)
- 1.0 (68)
- 2.0 (73)
- 3.0 (27)
- 4.0 (46)
- 6.0 (14)
- 8.0 (24)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.6944 in(12)
- 0.7338 in(2)
- 0.8913 in(6)
- 0.97 in(4)
- 0.9936 in(1)
- 1.0094 in(2)
- 1.0487 in(2)
- 1.2456 in(6)
- 1.2692 in(3)
- 1.285 in(12)
- 1.348 in(4)
- 1.3637 in(14)
- 1.3873 in(7)
- 1.4031 in(24)
- 1.4621 in(1)
- 1.5212 in(3)
- 1.5606 in(1)
to
Over All Length [L]
Over All Length [L]
- 17.638 mm(12)
- 18.638 mm(2)
- 22.638 mm(6)
- 24.638 mm(4)
- 25.238 mm(1)
- 25.638 mm(2)
- 26.638 mm(2)
- 31.638 mm(6)
- 32.238 mm(3)
- 32.638 mm(12)
- 34.238 mm(4)
- 34.638 mm(14)
- 35.238 mm(7)
- 35.638 mm(24)
- 37.138 mm(1)
- 38.638 mm(3)
- 39.638 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(6)
- 0.001 in(22)
- 0.002 in(40)
- 0.003 in(14)
- 0.004 in(76)
- 0.005 in(8)
- 0.006 in(14)
- 0.007 in(10)
- 0.008 in(80)
- 0.009 in(8)
- 0.01 in(10)
- 0.011 in(8)
- 0.012 in(10)
- 0.013 in(10)
- 0.014 in(18)
- 0.016 in(93)
- 0.017 in(2)
- 0.018 in(10)
- 0.019 in(3)
- 0.02 in(8)
- 0.021 in(1)
- 0.023 in(10)
- 0.026 in(1)
- 0.028 in(4)
- 0.031 in(92)
- 0.032 in(1)
- 0.035 in(10)
- 0.036 in(2)
- 0.039 in(9)
- -0.039 in(2)
- 0.047 in(84)
- 0.049 in(8)
- 0.059 in(8)
- 0.062 in(20)
- 0.063 in(56)
- 0.069 in(8)
- 0.078 in(8)
- 0.079 in(10)
- 0.089 in(10)
- 0.094 in(32)
- 0.098 in(2)
- 0.125 in(4)
- 0.126 in(8)
to
Corner Radius
Corner Radius
- 0.0 mm(6)
- 0.025 mm(22)
- 0.05 mm(40)
- 0.075 mm(14)
- 0.1 mm(76)
- 0.125 mm(8)
- 0.15 mm(14)
- 0.175 mm(10)
- 0.2 mm(80)
- 0.225 mm(8)
- 0.25 mm(10)
- 0.275 mm(8)
- 0.3 mm(10)
- 0.325 mm(10)
- 0.35 mm(18)
- 0.4 mm(93)
- 0.425 mm(2)
- 0.45 mm(10)
- 0.475 mm(3)
- 0.5 mm(8)
- 0.525 mm(1)
- 0.575 mm(10)
- 0.65 mm(1)
- 0.7 mm(4)
- 0.775 mm(8)
- 0.8 mm(84)
- 0.825 mm(1)
- 0.9 mm(10)
- 0.925 mm(2)
- 1.0 mm(9)
- -1.0 mm(2)
- 1.2 mm(84)
- 1.25 mm(8)
- 1.5 mm(8)
- 1.575 mm(20)
- 1.6 mm(56)
- 1.75 mm(8)
- 1.975 mm(8)
- 2.0 mm(10)
- 2.25 mm(10)
- 2.375 mm(8)
- 2.4 mm(30)
- 2.5 mm(2)
- 3.175 mm(4)
- 3.2 mm(8)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (46)
- 241 (12)
- CL4 (32)
- CM2 (44)
- CM3 (34)
- CM4 (28)
- CPX (42)
- CW2 (30)
- GH1 (8)
- GX (16)
- HT2 (54)
- HTX (50)
- K00331 (4)
- K060 (24)
- K090 (46)
- K1 (16)
- K1010P (8)
- K10M (74)
- K10P (60)
- K10U (66)
- K15U (66)
- K20K (66)
- K21 (26)
- K25M (60)
- K25P (52)
- K2885 (8)
- K313 (92)
- K35P (28)
- K420 (49)
- K45 (30)
- K4H (8)
- K68 (91)
- KB1340 (16)
- KB1345 (48)
- KB1610 (50)
- KB1625 (44)
- KB1630 (44)
- KB5610 (44)
- KB5625 (62)
- KB5630 (38)
- KB9610 (62)
- KB9640 (16)
- KBH10 (60)
- KBH10B (36)
- KBH20 (69)
- KBH20B (36)
- KBK35 (12)
- KC210 (26)
- KC250 (32)
- KC5010 (101)
- KC5020P (18)
- KC5025 (102)
- KC5410 (86)
- KC5510 (52)
- KC5525 (30)
- KC710 (28)
- KC720 (82)
- KC722 (26)
- KC730 (95)
- KC7310 (54)
- KC732 (74)
- KC8050 (84)
- KC810 (91)
- KC850 (95)
- KC9010 (72)
- KC9025 (86)
- KC910 (84)
- KC9105 (83)
- KC9110 (96)
- KC9120 (78)
- KC9125 (86)
- KC9140 (54)
- KC9145 (36)
- KC9210 (8)
- KC9215 (54)
- KC9225 (86)
- KC9240 (84)
- KC9240NEW (84)
- KC9245 (54)
- KC9315 (86)
- KC9320 (92)
- KC9325 (72)
- KC935 (96)
- KC950 (82)
- KC990 (76)
- KCD25 (28)
- KCK05 (86)
- KCK05B (74)
- KCK15 (76)
- KCK15B (82)
- KCK20 (94)
- KCK20B (92)
- KCM15 (84)
- KCM15B (78)
- KCM25 (86)
- KCM25B (82)
- KCM25S (16)
- KCM35 (76)
- KCM35B (58)
- KCP05 (80)
- KCP05B (52)
- KCP10 (86)
- KCP10B (94)
- KCP15 (4)
- KCP20S (16)
- KCP25 (86)
- KCP25B (94)
- KCP25C (84)
- KCP30 (84)
- KCP30B (50)
- KCP40 (42)
- KCP40B (54)
- KCPK05 (50)
- KCS10 (44)
- KCS10B (78)
- KCS25S (16)
- KCU10 (97)
- KCU10B (96)
- KCU25 (93)
- KCU25B (92)
- KD050 (47)
- KD081 (52)
- KD100 (31)
- KD120 (40)
- KD1400 (56)
- KD1405 (22)
- KD1425 (64)
- KM1 (24)
- KMF (12)
- KN10S (18)
- KS15 (12)
- KT1120 (16)
- KT125 (46)
- KT150 (28)
- KT175 (68)
- KT315 (88)
- KT325 (64)
- KT5020 (14)
- KTP10 (70)
- KTP25S (64)
- KU10 (24)
- KU10T (84)
- KU25T (14)
- KU30T (92)
- KY1310 (30)
- KY1320 (46)
- KY1540 (18)
- KY1615 (46)
- KY2000 (32)
- KY2100 (14)
- KY3000 (56)
- KY3400 (34)
- KY3500 (46)
- KY4000 (22)
- KY4300 (22)
- KY4400 (46)
- KYHK15B (46)
- KYK10 (24)
- KYK25 (34)
- KYK35 (46)
- KYS25 (16)
- KYS30 (16)
- NL200 (20)
- NL250 (50)
- NL300 (42)
- NL400 (20)
- NL920 (38)
- P25 (14)
- PS5 (24)
- SP0819 (40)
- SP3019 (32)
- SP4019 (28)
- SP4036 (4)
- SP4093 (4)
- SPADAP (2)
- TN7035 (10)
- X00511 (12)
- X00580 (12)
- X00581 (12)
- X00582 (12)
- X00583 (12)
- X00584 (12)
- X00585 (12)
- X00586 (12)
- X00591 (12)
- X00592 (12)
- X00593 (12)
- X00594 (12)
- X00596 (12)
- X00597 (12)
- X00599 (12)
- YY3A00 (2)
Hand Of Tool
Hand Of Tool
- L (64)
- R (74)
Wiper Insert
Wiper Insert
- N (104)
- Y (44)
F Dimension
F Dimension
- 17.0 mm(20)
- 18.278 mm(1)
- 20.3 mm(6)
- 22.0 mm(21)
- 23.0 mm(2)
- 23.278 mm(1)
- 23.8 mm(2)
- 26.8 mm(6)
- 27.0 mm(27)
- 27.8 mm(2)
- 28.278 mm(1)
- 28.677 mm(1)
- 30.8 mm(8)
- 32.8 mm(4)
- 35.0 mm(27)
- 35.8 mm(2)
- 36.278 mm(1)
- 36.677 mm(1)
- 36.98 mm(1)
- 37.8 mm(4)
to
F Dimension
F Dimension
- 0.6693 in(20)
- 0.7196 in(1)
- 0.7992 in(6)
- 0.8661 in(21)
- 0.9055 in(2)
- 0.9165 in(1)
- 0.937 in(2)
- 1.0551 in(6)
- 1.063 in(27)
- 1.0945 in(2)
- 1.1133 in(1)
- 1.129 in(1)
- 1.2126 in(8)
- 1.2913 in(4)
- 1.378 in(27)
- 1.4094 in(2)
- 1.4283 in(1)
- 1.444 in(1)
- 1.4559 in(1)
- 1.4882 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(19)
- 33.0 mm(2)
- 40.0 mm(24)
- 50.0 mm(29)
- 63.0 mm(30)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.2598 in(19)
- 1.2993 in(2)
- 1.5748 in(24)
- 1.9685 in(29)
- 2.4803 in(30)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 in(2)
- 393.661 in(10)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(2)
- 9999.0 mm(10)
to
Cutting Direction
Cutting Direction
- B (32)
- E (52)
- P (2)
- S (52)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (61)
- NEGATIVE-ZERO (32)
- NEUTRAL (ZERO) (13)
- POSITIVE-ZERO (2)
Maximum Bore Depth
Maximum Bore Depth
- 3.92 in(21)
- 5.04 in(24)
- 6.28 in(29)
- 7.88 in(30)
to
Maximum Bore Depth
Maximum Bore Depth
- 100.0 mm(21)
- 128.0 mm(24)
- 160.0 mm(29)
- 200.0 mm(30)
to
Boring Bar Material
Boring Bar Material
- S (138)
frontEnd
Clamp Style
Clamp Style
- D (28)
- N (11)
- P (26)
- S (39)
Cutting Width
Cutting Width
- 0.0394 in(8)
- 0.047 in(8)
- 0.0472 in(8)
- 0.0591 in(8)
- 0.062 in(8)
- 0.0689 in(8)
- 0.072 in(8)
- 0.078 in(8)
- 0.0787 in(8)
- 0.079 in(3)
- 0.0866 in(8)
- 0.088 in(8)
- 0.0886 in(5)
- 0.094 in(8)
- 0.097 in(8)
- 0.0984 in(8)
- 0.105 in(8)
- 0.108 in(8)
- 0.1083 in(8)
- 0.11 in(8)
- 0.118 in(8)
- 0.1181 in(10)
- 0.122 in(8)
- 0.125 in(10)
- 0.126 in(10)
- 0.128 in(8)
- 0.131 in(3)
- 0.1378 in(10)
- 0.142 in(8)
- 0.156 in(8)
- 0.157 in(8)
- 0.1574 in(10)
- 0.1575 in(10)
- 0.167 in(10)
- 0.1673 in(8)
- 0.169 in(8)
- 0.1771 in(10)
- 0.1772 in(10)
- 0.178 in(8)
- 0.185 in(9)
- 0.188 in(10)
- 0.189 in(10)
- 0.192 in(3)
- 0.193 in(3)
- 0.195 in(8)
- 0.196 in(8)
- 0.1969 in(2)
- 0.197 in(2)
- 0.202 in(2)
- 0.213 in(2)
- 0.2165 in(2)
- 0.2166 in(1)
- 0.218 in(1)
- 0.219 in(2)
- 0.2362 in(2)
- 0.25 in(3)
- 0.256 in(2)
- 0.281 in(1)
- 0.312 in(1)
- 0.375 in(1)
- 0.384 in(1)
to
Cutting Width
Cutting Width
- 1.0 mm(8)
- 1.19 mm(5)
- 1.194 mm(8)
- 1.2 mm(8)
- 1.5 mm(8)
- 1.57 mm(8)
- 1.575 mm(8)
- 1.75 mm(8)
- 1.829 mm(8)
- 1.981 mm(8)
- 2.0 mm(8)
- 2.2 mm(8)
- 2.235 mm(8)
- 2.236 mm(3)
- 2.25 mm(5)
- 2.387 mm(3)
- 2.388 mm(8)
- 2.39 mm(5)
- 2.464 mm(8)
- 2.5 mm(8)
- 2.667 mm(8)
- 2.743 mm(8)
- 2.75 mm(8)
- 2.794 mm(8)
- 2.997 mm(8)
- 3.0 mm(10)
- 3.099 mm(8)
- 3.17 mm(8)
- 3.175 mm(10)
- 3.18 mm(1)
- 3.2 mm(10)
- 3.25 mm(8)
- 3.251 mm(8)
- 3.32 mm(3)
- 3.329 mm(3)
- 3.5 mm(10)
- 3.607 mm(8)
- 3.96 mm(8)
- 3.962 mm(8)
- 3.974 mm(3)
- 3.988 mm(8)
- 4.0 mm(10)
- 4.242 mm(10)
- 4.25 mm(8)
- 4.3 mm(8)
- 4.5 mm(10)
- 4.521 mm(8)
- 4.699 mm(9)
- 4.775 mm(10)
- 4.78 mm(1)
- 4.785 mm(1)
- 4.788 mm(1)
- 4.8 mm(8)
- 4.801 mm(10)
- 4.81 mm(8)
- 4.88 mm(3)
- 4.9 mm(3)
- 4.95 mm(8)
- 4.953 mm(3)
- 4.978 mm(8)
- 5.0 mm(2)
- 5.004 mm(2)
- 5.131 mm(2)
- 5.41 mm(2)
- 5.5 mm(2)
- 5.537 mm(1)
- 5.563 mm(2)
- 6.0 mm(2)
- 6.35 mm(3)
- 6.36 mm(1)
- 6.502 mm(2)
- 7.137 mm(1)
- 7.925 mm(1)
- 9.525 mm(1)
- 9.754 mm(1)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (26)
- D-DIAMOND/RHOMBIC 55 (28)
- LT-TRIANGLE LAY DOWN THREAD 60 (7)
- T-TRIANGLE 60 (18)
- TN-TOP NOTCH (11)
- V-DIAMOND/RHOMBIC 35 (10)
- W-TRIGON 80 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0984 in(2)
- 0.1102 in(2)
- 0.1299 in(2)
- 0.1457 in(2)
- 0.1784 in(4)
- 0.1929 in(2)
- 0.1969 in(1)
- 0.2374 in(4)
- 0.2768 in(2)
- 0.2769 in(6)
- 0.395 in(12)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 2.5 mm(2)
- 2.8 mm(2)
- 3.3 mm(2)
- 3.7 mm(2)
- 4.532 mm(4)
- 4.9 mm(2)
- 5.0 mm(1)
- 6.03 mm(4)
- 7.03 mm(2)
- 7.032 mm(6)
- 10.032 mm(12)
to
Gage Length
Gage Length
- 26.1332 in(1)
- 26.5741 in(1)
- 32.3344 in(1)
- 33.5820 in(1)
- 41.1196 in(1)
- 42.8991 in(1)
- 54.5820 in(1)
- 55.4840 in(1)
Gage Length
Gage Length
- 663.7830 mm(1)
- 674.9830 mm(1)
- 821.2930 mm(1)
- 852.9830 mm(1)
- 1044.4380 mm(1)
- 1089.6380 mm(1)
- 1386.3830 mm(1)
- 1409.2930 mm(1)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (72)
- B L (76)
- C A (46)
- C N (56)
- D P (73)
- H T (88)
- H W (104)
backEnd
Connection Type
Connection Type
- BORING BAR HEAD (104)
Back-End Diameter
Back-End Diameter
- 25.0 mm(31)
- 32.0 mm(38)
- 40.0 mm(41)
- 50.0 mm(37)
- 50.8 mm(1)
- 60.0 mm(1)
- 63.5 mm(1)
- 76.2 mm(1)
- 80.0 mm(1)
- 100.0 mm(1)
- 101.6 mm(1)
to
Back-End Diameter
Back-End Diameter
- 1.9685 in(1)
- 2.0 in(1)
- 2.3622 in(1)
- 2.5 in(1)
- 3.0 in(1)
- 3.1496 in(1)
- 3.937 in(1)
- 4.0 in(1)
to
No filters matching ""
