Stránka nebyla nalezena
Stránka nebyla nalezena
Stránka nebyla nalezena
Stránka nebyla nalezena
Stránka nebyla nalezena
Stránka nebyla nalezena
Stránka nebyla nalezena
Stránka nebyla nalezena
Stránka nebyla nalezena
Stránka nebyla nalezena
[an error occurred while processing this directive]

Chyba 404 – stránka nenalezena!

Náš tým vám pomůže najít to, co hledáte

Kontaktujte nás
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
New Folder
    • Applied Filters:
    • Clear All

A folder with the name already exists.

Special characters not allowed
Product successfully added to project __PROJECT_NAME__
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    

You are about to leave the Solution building process.

Are you sure you want to leave?

Workpiece Selection

Standard

ALL

Material

Select a Value

Hardness

--

      Hardness Scale

      --

        Permitted Groups :

        Group

        SubGroup

        Hardness (HB)

        Hardness (HRC)

        Cancel Ok

        Chyba 404 – stránka nenalezena!

        Náš tým vám pomůže najít to, co hledáte

        Kontaktujte nás
        You are about to add to your My Solutions page. Do you want to proceed?
        Select the destination where you want to move to.
        New Folder
          • Applied Filters:
          • Clear All

        A folder with the name already exists.

        Special characters not allowed
        Product successfully added to project __PROJECT_NAME__
        product-image
        Please adjust the following properties from

        ISO Catalog Number

        ANSI Catalog Number

        to find similar products.

        Models

        You should be logged to see your dashboard information
        Session expired due to inactivity, please login again
        The product/s () you were trying to add to the cart is/are not available, please contact customer service
        item(s) successfully added to the cart
        View Cart

        . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

        Minimum quantity should be

        SAP Material Number ISO Catalog Number Grade    

        You are about to leave the Solution building process.

        Are you sure you want to leave?

        Workpiece Selection

        Standard

        ALL

        Material

        Select a Value

        Hardness

        --

            Hardness Scale

            --

              Permitted Groups :

              Group

              SubGroup

              Hardness (HB)

              Hardness (HRC)

              Cancel Ok

              Chyba 404 – stránka nenalezena!

              Náš tým vám pomůže najít to, co hledáte

              Kontaktujte nás
              You are about to add to your My Solutions page. Do you want to proceed?
              Select the destination where you want to move to.
              New Folder
                • Applied Filters:
                • Clear All

              A folder with the name already exists.

              Special characters not allowed
              Product successfully added to project __PROJECT_NAME__
              product-image
              Please adjust the following properties from

              ISO Catalog Number

              ANSI Catalog Number

              to find similar products.

              Models

              You should be logged to see your dashboard information
              Session expired due to inactivity, please login again
              The product/s () you were trying to add to the cart is/are not available, please contact customer service
              item(s) successfully added to the cart
              View Cart

              . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

              Minimum quantity should be

              SAP Material Number ISO Catalog Number Grade    

              You are about to leave the Solution building process.

              Are you sure you want to leave?

              Workpiece Selection

              Standard

              ALL

              Material

              Select a Value

              Hardness

              --

                  Hardness Scale

                  --

                    Permitted Groups :

                    Group

                    SubGroup

                    Hardness (HB)

                    Hardness (HRC)

                    Cancel Ok

                    Chyba 404 – stránka nenalezena!

                    Náš tým vám pomůže najít to, co hledáte

                    Kontaktujte nás
                    You are about to add to your My Solutions page. Do you want to proceed?
                    Select the destination where you want to move to.
                    New Folder
                      • Applied Filters:
                      • Clear All

                    A folder with the name already exists.

                    Special characters not allowed
                    Product successfully added to project __PROJECT_NAME__
                    product-image
                    Please adjust the following properties from

                    ISO Catalog Number

                    ANSI Catalog Number

                    to find similar products.

                    Models

                    You should be logged to see your dashboard information
                    Session expired due to inactivity, please login again
                    The product/s () you were trying to add to the cart is/are not available, please contact customer service
                    item(s) successfully added to the cart
                    View Cart

                    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                    Minimum quantity should be

                    SAP Material Number ISO Catalog Number Grade    

                    You are about to leave the Solution building process.

                    Are you sure you want to leave?

                    Workpiece Selection

                    Standard

                    ALL

                    Material

                    Select a Value

                    Hardness

                    --

                        Hardness Scale

                        --

                          Permitted Groups :

                          Group

                          SubGroup

                          Hardness (HB)

                          Hardness (HRC)

                          Cancel Ok

                          Chyba 404 – stránka nenalezena!

                          Náš tým vám pomůže najít to, co hledáte

                          Kontaktujte nás
                          You are about to add to your My Solutions page. Do you want to proceed?
                          Select the destination where you want to move to.
                          New Folder
                            • Applied Filters:
                            • Clear All

                          A folder with the name already exists.

                          Special characters not allowed
                          Product successfully added to project __PROJECT_NAME__
                          product-image
                          Please adjust the following properties from

                          ISO Catalog Number

                          ANSI Catalog Number

                          to find similar products.

                          Models

                          You should be logged to see your dashboard information
                          Session expired due to inactivity, please login again
                          The product/s () you were trying to add to the cart is/are not available, please contact customer service
                          item(s) successfully added to the cart
                          View Cart

                          . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                          Minimum quantity should be

                          SAP Material Number ISO Catalog Number Grade    

                          You are about to leave the Solution building process.

                          Are you sure you want to leave?

                          Workpiece Selection

                          Standard

                          ALL

                          Material

                          Select a Value

                          Hardness

                          --

                              Hardness Scale

                              --

                                Permitted Groups :

                                Group

                                SubGroup

                                Hardness (HB)

                                Hardness (HRC)

                                Cancel Ok

                                Chyba 404 – stránka nenalezena!

                                Náš tým vám pomůže najít to, co hledáte

                                Kontaktujte nás
                                You are about to add to your My Solutions page. Do you want to proceed?
                                Select the destination where you want to move to.
                                New Folder
                                  • Applied Filters:
                                  • Clear All

                                A folder with the name already exists.

                                Special characters not allowed
                                Product successfully added to project __PROJECT_NAME__
                                product-image
                                Please adjust the following properties from

                                ISO Catalog Number

                                ANSI Catalog Number

                                to find similar products.

                                Models

                                You should be logged to see your dashboard information
                                Session expired due to inactivity, please login again
                                The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                item(s) successfully added to the cart
                                View Cart

                                . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                Minimum quantity should be

                                SAP Material Number ISO Catalog Number Grade    

                                You are about to leave the Solution building process.

                                Are you sure you want to leave?

                                Workpiece Selection

                                Standard

                                ALL

                                Material

                                Select a Value

                                Hardness

                                --

                                    Hardness Scale

                                    --

                                      Permitted Groups :

                                      Group

                                      SubGroup

                                      Hardness (HB)

                                      Hardness (HRC)

                                      Cancel Ok

                                      Chyba 404 – stránka nenalezena!

                                      Náš tým vám pomůže najít to, co hledáte

                                      Kontaktujte nás
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Select the destination where you want to move to.
                                      New Folder
                                        • Applied Filters:
                                        • Clear All

                                      A folder with the name already exists.

                                      Special characters not allowed
                                      Product successfully added to project __PROJECT_NAME__
                                      product-image
                                      Please adjust the following properties from

                                      ISO Catalog Number

                                      ANSI Catalog Number

                                      to find similar products.

                                      Models

                                      You should be logged to see your dashboard information
                                      Session expired due to inactivity, please login again
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                      item(s) successfully added to the cart
                                      View Cart

                                      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                      Minimum quantity should be

                                      SAP Material Number ISO Catalog Number Grade    

                                      You are about to leave the Solution building process.

                                      Are you sure you want to leave?

                                      Workpiece Selection

                                      Standard

                                      ALL

                                      Material

                                      Select a Value

                                      Hardness

                                      --

                                          Hardness Scale

                                          --

                                            Permitted Groups :

                                            Group

                                            SubGroup

                                            Hardness (HB)

                                            Hardness (HRC)

                                            Cancel Ok

                                            Chyba 404 – stránka nenalezena!

                                            Náš tým vám pomůže najít to, co hledáte

                                            Kontaktujte nás
                                            You are about to add to your My Solutions page. Do you want to proceed?
                                            Select the destination where you want to move to.
                                            New Folder
                                              • Applied Filters:
                                              • Clear All

                                            A folder with the name already exists.

                                            Special characters not allowed
                                            Product successfully added to project __PROJECT_NAME__
                                            product-image
                                            Please adjust the following properties from

                                            ISO Catalog Number

                                            ANSI Catalog Number

                                            to find similar products.

                                            Models

                                            You should be logged to see your dashboard information
                                            Session expired due to inactivity, please login again
                                            The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                            item(s) successfully added to the cart
                                            View Cart

                                            . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                            Minimum quantity should be

                                            SAP Material Number ISO Catalog Number Grade    

                                            You are about to leave the Solution building process.

                                            Are you sure you want to leave?

                                            Workpiece Selection

                                            Standard

                                            ALL

                                            Material

                                            Select a Value

                                            Hardness

                                            --

                                                Hardness Scale

                                                --

                                                  Permitted Groups :

                                                  Group

                                                  SubGroup

                                                  Hardness (HB)

                                                  Hardness (HRC)

                                                  Cancel Ok

                                                  Chyba 404 – stránka nenalezena!

                                                  Náš tým vám pomůže najít to, co hledáte

                                                  Kontaktujte nás
                                                  You are about to add to your My Solutions page. Do you want to proceed?
                                                  Select the destination where you want to move to.
                                                  New Folder
                                                    • Applied Filters:
                                                    • Clear All

                                                  A folder with the name already exists.

                                                  Special characters not allowed
                                                  Product successfully added to project __PROJECT_NAME__
                                                  product-image
                                                  Please adjust the following properties from

                                                  ISO Catalog Number

                                                  ANSI Catalog Number

                                                  to find similar products.

                                                  Models

                                                  You should be logged to see your dashboard information
                                                  Session expired due to inactivity, please login again
                                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                                  item(s) successfully added to the cart
                                                  View Cart

                                                  . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                                  Minimum quantity should be

                                                  SAP Material Number ISO Catalog Number Grade    

                                                  You are about to leave the Solution building process.

                                                  Are you sure you want to leave?

                                                  Workpiece Selection

                                                  Standard

                                                  ALL

                                                  Material

                                                  Select a Value

                                                  Hardness

                                                  --

                                                      Hardness Scale

                                                      --

                                                        Permitted Groups :

                                                        Group

                                                        SubGroup

                                                        Hardness (HB)

                                                        Hardness (HRC)

                                                        Cancel Ok

                                                        Chyba 404 – stránka nenalezena!

                                                        Náš tým vám pomůže najít to, co hledáte

                                                        Kontaktujte nás
                                                        You are about to add to your My Solutions page. Do you want to proceed?
                                                        Select the destination where you want to move to.
                                                        New Folder
                                                          • Applied Filters:
                                                          • Clear All

                                                        A folder with the name already exists.

                                                        Special characters not allowed
                                                        Product successfully added to project __PROJECT_NAME__
                                                        product-image
                                                        Please adjust the following properties from

                                                        ISO Catalog Number

                                                        ANSI Catalog Number

                                                        to find similar products.

                                                        Models

                                                        You should be logged to see your dashboard information
                                                        Session expired due to inactivity, please login again
                                                        The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                                        item(s) successfully added to the cart
                                                        View Cart

                                                        . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                                        Minimum quantity should be

                                                        SAP Material Number ISO Catalog Number Grade    

                                                        You are about to leave the Solution building process.

                                                        Are you sure you want to leave?

                                                        Workpiece Selection

                                                        Standard

                                                        ALL

                                                        Material

                                                        Select a Value

                                                        Hardness

                                                        --

                                                            Hardness Scale

                                                            --

                                                              Permitted Groups :

                                                              Group

                                                              SubGroup

                                                              Hardness (HB)

                                                              Hardness (HRC)

                                                              Cancel Ok

                                                              Cenově výhodný, všestranný karbidový vrták.

                                                              GOdrill

                                                              • Cenově výhodné, jednorázové řešení.
                                                              • Karbidový vrták pro průměry 1-20mm (0.0394”-0.7874”) a 8 x D délky vrtání.
                                                              • Konstrukce bez vodících fazetek pro snížení tření a tepla.
                                                              • Vnitřní chlazení je dostupné od 1 mm (0.0394”).
                                                              • TiN vrchní vrstva slouží jako indikátor opotřebení.

                                                              All part of the First Choice Program.

                                                              Easy to select, easy to order, easy to apply, exceptional performance. Learn more about First Choice:

                                                              firs choice logo
                                                              Select Filters
                                                              Filters
                                                              Filters
                                                                View filters in
                                                                Metric
                                                                Inch
                                                                keyFilters
                                                                Workpiece Material
                                                                Workpiece Material
                                                                • P Steel (1700)
                                                                  • P5
                                                                    Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1700)
                                                                  • P6
                                                                    High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1700)
                                                                  • P0
                                                                    Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1700)
                                                                  • P1
                                                                    Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1700)
                                                                  • P2
                                                                    Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1700)
                                                                  • P3
                                                                    Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1700)
                                                                  • P4
                                                                    Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1700)
                                                                • M Stainless Steel (1700)
                                                                  • M1
                                                                    Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1700)
                                                                  • M3
                                                                    Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1700)
                                                                  • M2
                                                                    High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1700)
                                                                • K Cast Iron (1700)
                                                                  • K1
                                                                    Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1700)
                                                                  • K3
                                                                    High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1700)
                                                                  • K2
                                                                    Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1700)
                                                                • N Non-Ferrous Materials (1700)
                                                                  • N3
                                                                    High-Silicon Aluminum Alloys Si >12.2%(1700)
                                                                  • N4
                                                                    Copper, Brass, Zinc-based on machinability index range of 70-100 (1700)
                                                                  • N1
                                                                    Wrought Aluminum (1700)
                                                                  • N2
                                                                    Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1700)
                                                                • S High-Temp Alloys (1700)
                                                                  • S2
                                                                    Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1700)
                                                                  • S1
                                                                    Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1700)
                                                                  • S3
                                                                    Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1700)
                                                                  • S4
                                                                    Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1700)
                                                                • H Hardened Materials (1700)
                                                                  • H1
                                                                    Hardened Materials 44-48 HRC(1700)
                                                                  • H2
                                                                    Hardened Materials 48-55 HRC(1700)
                                                                Select First Choice
                                                                • BR (103)
                                                                • CN (587)
                                                                • DE (568)
                                                                • GB (417)
                                                                • IN (156)
                                                                • SG (213)
                                                                • US (775)
                                                                Applications
                                                                Applications
                                                                • DrillingDrilling (1700)
                                                                • Stacked Plates DrillingStacked Plates Drilling (1700)
                                                                Cutting Diameter
                                                                Cutting Diameter
                                                                • 0.0394 in(3)
                                                                • 0.04 in(3)
                                                                • 0.041 in(2)
                                                                • 0.042 in(3)
                                                                • 0.043 in(1)
                                                                • 0.0433 in(3)
                                                                • 0.0465 in(2)
                                                                • 0.0469 in(3)
                                                                • 0.0472 in(3)
                                                                • 0.0512 in(3)
                                                                • 0.052 in(3)
                                                                • 0.055 in(3)
                                                                • 0.0551 in(3)
                                                                • 0.0591 in(5)
                                                                • 0.063 in(5)
                                                                • 0.0669 in(5)
                                                                • 0.0709 in(5)
                                                                • 0.0748 in(5)
                                                                • 0.0781 in(5)
                                                                • 0.0787 in(5)
                                                                • 0.0827 in(5)
                                                                • 0.0866 in(5)
                                                                • 0.0906 in(5)
                                                                • 0.0938 in(5)
                                                                • 0.0945 in(5)
                                                                • 0.096 in(5)
                                                                • 0.098 in(5)
                                                                • 0.0984 in(5)
                                                                • 0.0996 in(1)
                                                                • 0.1015 in(5)
                                                                • 0.1024 in(5)
                                                                • 0.104 in(5)
                                                                • 0.1063 in(5)
                                                                • 0.1065 in(5)
                                                                • 0.1094 in(5)
                                                                • 0.1102 in(5)
                                                                • 0.111 in(5)
                                                                • 0.113 in(5)
                                                                • 0.1142 in(5)
                                                                • 0.116 in(5)
                                                                • 0.1181 in(10)
                                                                • 0.12 in(5)
                                                                • 0.122 in(9)
                                                                • 0.125 in(5)
                                                                • 0.126 in(7)
                                                                • 0.1285 in(5)
                                                                • 0.1299 in(9)
                                                                • 0.1339 in(8)
                                                                • 0.136 in(5)
                                                                • 0.1378 in(8)
                                                                • 0.1406 in(5)
                                                                • 0.1417 in(8)
                                                                • 0.144 in(5)
                                                                • 0.1457 in(7)
                                                                • 0.147 in(5)
                                                                • 0.1496 in(8)
                                                                • 0.1535 in(8)
                                                                • 0.1563 in(5)
                                                                • 0.1575 in(9)
                                                                • 0.159 in(5)
                                                                • 0.161 in(5)
                                                                • 0.1614 in(9)
                                                                • 0.1654 in(9)
                                                                • 0.166 in(5)
                                                                • 0.1693 in(9)
                                                                • 0.1719 in(5)
                                                                • 0.1732 in(7)
                                                                • 0.1772 in(9)
                                                                • 0.1811 in(7)
                                                                • 0.182 in(5)
                                                                • 0.185 in(8)
                                                                • 0.1875 in(5)
                                                                • 0.189 in(9)
                                                                • 0.191 in(5)
                                                                • 0.1929 in(7)
                                                                • 0.1969 in(9)
                                                                • 0.2008 in(9)
                                                                • 0.201 in(5)
                                                                • 0.2031 in(5)
                                                                • 0.2047 in(9)
                                                                • 0.2087 in(8)
                                                                • 0.2126 in(9)
                                                                • 0.213 in(5)
                                                                • 0.2165 in(9)
                                                                • 0.2188 in(5)
                                                                • 0.2205 in(9)
                                                                • 0.2211 in(5)
                                                                • 0.2244 in(8)
                                                                • 0.2283 in(9)
                                                                • 0.2323 in(9)
                                                                • 0.2344 in(5)
                                                                • 0.2362 in(9)
                                                                • 0.2402 in(9)
                                                                • 0.2441 in(8)
                                                                • 0.248 in(7)
                                                                • 0.25 in(5)
                                                                • 0.252 in(6)
                                                                • 0.2559 in(9)
                                                                • 0.257 in(5)
                                                                • 0.2598 in(9)
                                                                • 0.261 in(5)
                                                                • 0.2638 in(8)
                                                                • 0.2656 in(5)
                                                                • 0.2677 in(9)
                                                                • 0.2717 in(8)
                                                                • 0.2756 in(9)
                                                                • 0.2795 in(8)
                                                                • 0.2813 in(5)
                                                                • 0.2835 in(7)
                                                                • 0.2874 in(8)
                                                                • 0.2913 in(9)
                                                                • 0.2953 in(9)
                                                                • 0.2969 in(5)
                                                                • 0.2992 in(7)
                                                                • 0.3031 in(7)
                                                                • 0.3071 in(9)
                                                                • 0.311 in(8)
                                                                • 0.3125 in(5)
                                                                • 0.315 in(9)
                                                                • 0.3189 in(9)
                                                                • 0.3228 in(9)
                                                                • 0.3268 in(8)
                                                                • 0.3281 in(5)
                                                                • 0.3307 in(8)
                                                                • 0.332 in(5)
                                                                • 0.3346 in(9)
                                                                • 0.3386 in(9)
                                                                • 0.3425 in(8)
                                                                • 0.3438 in(5)
                                                                • 0.3465 in(9)
                                                                • 0.3504 in(8)
                                                                • 0.3543 in(9)
                                                                • 0.3583 in(7)
                                                                • 0.3594 in(5)
                                                                • 0.3622 in(6)
                                                                • 0.3661 in(9)
                                                                • 0.368 in(5)
                                                                • 0.3701 in(8)
                                                                • 0.374 in(8)
                                                                • 0.375 in(5)
                                                                • 0.378 in(7)
                                                                • 0.3819 in(8)
                                                                • 0.3858 in(8)
                                                                • 0.3898 in(8)
                                                                • 0.3906 in(5)
                                                                • 0.3937 in(10)
                                                                • 0.3976 in(7)
                                                                • 0.4016 in(9)
                                                                • 0.4055 in(9)
                                                                • 0.4063 in(5)
                                                                • 0.4094 in(7)
                                                                • 0.4134 in(9)
                                                                • 0.4173 in(9)
                                                                • 0.4213 in(7)
                                                                • 0.4219 in(5)
                                                                • 0.4252 in(9)
                                                                • 0.4291 in(7)
                                                                • 0.4331 in(9)
                                                                • 0.437 in(7)
                                                                • 0.4375 in(5)
                                                                • 0.4409 in(8)
                                                                • 0.4449 in(6)
                                                                • 0.4488 in(8)
                                                                • 0.4528 in(9)
                                                                • 0.4531 in(5)
                                                                • 0.4567 in(7)
                                                                • 0.4606 in(8)
                                                                • 0.4646 in(9)
                                                                • 0.4685 in(7)
                                                                • 0.4688 in(5)
                                                                • 0.4724 in(9)
                                                                • 0.4764 in(8)
                                                                • 0.4803 in(8)
                                                                • 0.4843 in(8)
                                                                • 0.4844 in(5)
                                                                • 0.4882 in(7)
                                                                • 0.4921 in(8)
                                                                • 0.4961 in(7)
                                                                • 0.5 in(8)
                                                                • 0.5039 in(7)
                                                                • 0.5079 in(8)
                                                                • 0.5118 in(9)
                                                                • 0.5156 in(5)
                                                                • 0.5157 in(7)
                                                                • 0.5197 in(5)
                                                                • 0.5236 in(6)
                                                                • 0.5276 in(5)
                                                                • 0.5315 in(9)
                                                                • 0.5354 in(8)
                                                                • 0.5394 in(8)
                                                                • 0.5433 in(6)
                                                                • 0.5469 in(5)
                                                                • 0.5472 in(7)
                                                                • 0.5512 in(9)
                                                                • 0.5551 in(9)
                                                                • 0.5591 in(7)
                                                                • 0.5625 in(5)
                                                                • 0.563 in(7)
                                                                • 0.5669 in(6)
                                                                • 0.5709 in(9)
                                                                • 0.5748 in(6)
                                                                • 0.5781 in(5)
                                                                • 0.5787 in(5)
                                                                • 0.5827 in(8)
                                                                • 0.5866 in(4)
                                                                • 0.5906 in(9)
                                                                • 0.5938 in(5)
                                                                • 0.5945 in(7)
                                                                • 0.5984 in(7)
                                                                • 0.6024 in(7)
                                                                • 0.6063 in(6)
                                                                • 0.6094 in(5)
                                                                • 0.6102 in(6)
                                                                • 0.6142 in(6)
                                                                • 0.6181 in(6)
                                                                • 0.622 in(7)
                                                                • 0.625 in(5)
                                                                • 0.626 in(7)
                                                                • 0.6299 in(9)
                                                                • 0.6339 in(8)
                                                                • 0.6378 in(7)
                                                                • 0.6406 in(4)
                                                                • 0.6417 in(5)
                                                                • 0.6457 in(7)
                                                                • 0.6496 in(8)
                                                                • 0.6535 in(4)
                                                                • 0.6563 in(5)
                                                                • 0.6575 in(6)
                                                                • 0.6614 in(7)
                                                                • 0.6654 in(3)
                                                                • 0.6693 in(9)
                                                                • 0.6732 in(5)
                                                                • 0.6772 in(5)
                                                                • 0.6811 in(4)
                                                                • 0.685 in(3)
                                                                • 0.6875 in(5)
                                                                • 0.689 in(9)
                                                                • 0.6929 in(5)
                                                                • 0.6969 in(5)
                                                                • 0.7008 in(5)
                                                                • 0.7031 in(5)
                                                                • 0.7047 in(4)
                                                                • 0.7087 in(9)
                                                                • 0.7126 in(5)
                                                                • 0.7165 in(5)
                                                                • 0.7188 in(5)
                                                                • 0.7205 in(4)
                                                                • 0.7244 in(3)
                                                                • 0.7283 in(8)
                                                                • 0.7323 in(4)
                                                                • 0.7344 in(5)
                                                                • 0.7362 in(7)
                                                                • 0.7402 in(6)
                                                                • 0.7441 in(4)
                                                                • 0.748 in(9)
                                                                • 0.75 in(5)
                                                                • 0.752 in(4)
                                                                • 0.7559 in(5)
                                                                • 0.7598 in(4)
                                                                • 0.7638 in(5)
                                                                • 0.7677 in(8)
                                                                • 0.7717 in(2)
                                                                • 0.7756 in(5)
                                                                • 0.7795 in(5)
                                                                • 0.7835 in(4)
                                                                • 0.7874 in(9)
                                                                Cutting Diameter MintoCutting Diameter Max
                                                                Cutting Diameter
                                                                Cutting Diameter
                                                                • 1.0 mm(3)
                                                                • 1.016 mm(3)
                                                                • 1.041 mm(2)
                                                                • 1.067 mm(3)
                                                                • 1.092 mm(1)
                                                                • 1.1 mm(3)
                                                                • 1.181 mm(2)
                                                                • 1.1906 mm(3)
                                                                • 1.2 mm(3)
                                                                • 1.3 mm(3)
                                                                • 1.321 mm(3)
                                                                • 1.397 mm(3)
                                                                • 1.4 mm(3)
                                                                • 1.5 mm(5)
                                                                • 1.6 mm(5)
                                                                • 1.7 mm(5)
                                                                • 1.8 mm(5)
                                                                • 1.9 mm(5)
                                                                • 1.9844 mm(5)
                                                                • 2.0 mm(5)
                                                                • 2.1 mm(5)
                                                                • 2.2 mm(5)
                                                                • 2.3 mm(5)
                                                                • 2.383 mm(5)
                                                                • 2.4 mm(5)
                                                                • 2.439 mm(5)
                                                                • 2.489 mm(5)
                                                                • 2.5 mm(5)
                                                                • 2.53 mm(1)
                                                                • 2.578 mm(5)
                                                                • 2.6 mm(5)
                                                                • 2.642 mm(5)
                                                                • 2.7 mm(5)
                                                                • 2.705 mm(5)
                                                                • 2.779 mm(5)
                                                                • 2.8 mm(5)
                                                                • 2.82 mm(5)
                                                                • 2.87 mm(5)
                                                                • 2.9 mm(5)
                                                                • 2.947 mm(5)
                                                                • 3.0 mm(10)
                                                                • 3.048 mm(5)
                                                                • 3.1 mm(9)
                                                                • 3.175 mm(5)
                                                                • 3.2 mm(7)
                                                                • 3.264 mm(5)
                                                                • 3.3 mm(9)
                                                                • 3.4 mm(8)
                                                                • 3.455 mm(5)
                                                                • 3.5 mm(8)
                                                                • 3.571 mm(5)
                                                                • 3.6 mm(8)
                                                                • 3.658 mm(5)
                                                                • 3.7 mm(7)
                                                                • 3.734 mm(5)
                                                                • 3.8 mm(8)
                                                                • 3.9 mm(8)
                                                                • 3.97 mm(5)
                                                                • 4.0 mm(9)
                                                                • 4.039 mm(5)
                                                                • 4.09 mm(5)
                                                                • 4.1 mm(9)
                                                                • 4.2 mm(9)
                                                                • 4.217 mm(5)
                                                                • 4.3 mm(9)
                                                                • 4.3656 mm(5)
                                                                • 4.4 mm(7)
                                                                • 4.5 mm(9)
                                                                • 4.6 mm(7)
                                                                • 4.623 mm(5)
                                                                • 4.7 mm(8)
                                                                • 4.763 mm(5)
                                                                • 4.8 mm(9)
                                                                • 4.852 mm(5)
                                                                • 4.9 mm(7)
                                                                • 5.0 mm(9)
                                                                • 5.1 mm(9)
                                                                • 5.106 mm(5)
                                                                • 5.1594 mm(5)
                                                                • 5.2 mm(9)
                                                                • 5.3 mm(8)
                                                                • 5.4 mm(9)
                                                                • 5.41 mm(5)
                                                                • 5.5 mm(9)
                                                                • 5.558 mm(5)
                                                                • 5.6 mm(9)
                                                                • 5.616 mm(5)
                                                                • 5.7 mm(8)
                                                                • 5.8 mm(9)
                                                                • 5.9 mm(9)
                                                                • 5.954 mm(5)
                                                                • 6.0 mm(9)
                                                                • 6.1 mm(9)
                                                                • 6.2 mm(8)
                                                                • 6.3 mm(7)
                                                                • 6.35 mm(5)
                                                                • 6.4 mm(6)
                                                                • 6.5 mm(9)
                                                                • 6.528 mm(5)
                                                                • 6.6 mm(9)
                                                                • 6.63 mm(5)
                                                                • 6.7 mm(8)
                                                                • 6.746 mm(5)
                                                                • 6.8 mm(9)
                                                                • 6.9 mm(8)
                                                                • 7.0 mm(9)
                                                                • 7.1 mm(8)
                                                                • 7.145 mm(5)
                                                                • 7.2 mm(7)
                                                                • 7.3 mm(8)
                                                                • 7.4 mm(9)
                                                                • 7.5 mm(9)
                                                                • 7.5406 mm(5)
                                                                • 7.6 mm(7)
                                                                • 7.7 mm(7)
                                                                • 7.8 mm(9)
                                                                • 7.9 mm(8)
                                                                • 7.9375 mm(5)
                                                                • 8.0 mm(9)
                                                                • 8.1 mm(9)
                                                                • 8.2 mm(9)
                                                                • 8.3 mm(8)
                                                                • 8.3344 mm(5)
                                                                • 8.4 mm(8)
                                                                • 8.433 mm(5)
                                                                • 8.5 mm(9)
                                                                • 8.6 mm(9)
                                                                • 8.7 mm(8)
                                                                • 8.733 mm(5)
                                                                • 8.8 mm(9)
                                                                • 8.9 mm(8)
                                                                • 9.0 mm(9)
                                                                • 9.1 mm(7)
                                                                • 9.129 mm(5)
                                                                • 9.2 mm(6)
                                                                • 9.3 mm(9)
                                                                • 9.347 mm(5)
                                                                • 9.4 mm(8)
                                                                • 9.5 mm(8)
                                                                • 9.525 mm(5)
                                                                • 9.6 mm(7)
                                                                • 9.7 mm(8)
                                                                • 9.8 mm(8)
                                                                • 9.9 mm(8)
                                                                • 9.921 mm(5)
                                                                • 10.0 mm(10)
                                                                • 10.1 mm(7)
                                                                • 10.2 mm(9)
                                                                • 10.3 mm(9)
                                                                • 10.32 mm(5)
                                                                • 10.4 mm(7)
                                                                • 10.5 mm(9)
                                                                • 10.6 mm(9)
                                                                • 10.7 mm(7)
                                                                • 10.7156 mm(5)
                                                                • 10.8 mm(9)
                                                                • 10.9 mm(7)
                                                                • 11.0 mm(9)
                                                                • 11.1 mm(7)
                                                                • 11.113 mm(5)
                                                                • 11.2 mm(8)
                                                                • 11.3 mm(6)
                                                                • 11.4 mm(8)
                                                                • 11.5 mm(9)
                                                                • 11.5094 mm(5)
                                                                • 11.6 mm(7)
                                                                • 11.7 mm(8)
                                                                • 11.8 mm(9)
                                                                • 11.9 mm(7)
                                                                • 11.908 mm(5)
                                                                • 12.0 mm(9)
                                                                • 12.1 mm(8)
                                                                • 12.2 mm(8)
                                                                • 12.3 mm(8)
                                                                • 12.304 mm(5)
                                                                • 12.4 mm(7)
                                                                • 12.5 mm(8)
                                                                • 12.6 mm(7)
                                                                • 12.7 mm(8)
                                                                • 12.8 mm(7)
                                                                • 12.9 mm(8)
                                                                • 13.0 mm(9)
                                                                • 13.096 mm(5)
                                                                • 13.1 mm(7)
                                                                • 13.2 mm(5)
                                                                • 13.3 mm(6)
                                                                • 13.4 mm(5)
                                                                • 13.5 mm(9)
                                                                • 13.6 mm(8)
                                                                • 13.7 mm(8)
                                                                • 13.8 mm(6)
                                                                • 13.8906 mm(5)
                                                                • 13.9 mm(7)
                                                                • 14.0 mm(9)
                                                                • 14.1 mm(9)
                                                                • 14.2 mm(7)
                                                                • 14.288 mm(5)
                                                                • 14.3 mm(7)
                                                                • 14.4 mm(6)
                                                                • 14.5 mm(9)
                                                                • 14.6 mm(6)
                                                                • 14.6844 mm(5)
                                                                • 14.7 mm(5)
                                                                • 14.8 mm(8)
                                                                • 14.9 mm(4)
                                                                • 15.0 mm(9)
                                                                • 15.083 mm(5)
                                                                • 15.1 mm(7)
                                                                • 15.2 mm(7)
                                                                • 15.3 mm(7)
                                                                • 15.4 mm(6)
                                                                • 15.479 mm(5)
                                                                • 15.5 mm(6)
                                                                • 15.6 mm(6)
                                                                • 15.7 mm(6)
                                                                • 15.8 mm(7)
                                                                • 15.875 mm(5)
                                                                • 15.9 mm(7)
                                                                • 16.0 mm(9)
                                                                • 16.1 mm(8)
                                                                • 16.2 mm(7)
                                                                • 16.271 mm(4)
                                                                • 16.3 mm(5)
                                                                • 16.4 mm(7)
                                                                • 16.5 mm(8)
                                                                • 16.6 mm(4)
                                                                • 16.67 mm(5)
                                                                • 16.7 mm(6)
                                                                • 16.8 mm(7)
                                                                • 16.9 mm(3)
                                                                • 17.0 mm(9)
                                                                • 17.1 mm(5)
                                                                • 17.2 mm(5)
                                                                • 17.3 mm(4)
                                                                • 17.4 mm(3)
                                                                • 17.463 mm(5)
                                                                • 17.5 mm(9)
                                                                • 17.6 mm(5)
                                                                • 17.7 mm(5)
                                                                • 17.8 mm(5)
                                                                • 17.8594 mm(5)
                                                                • 17.9 mm(4)
                                                                • 18.0 mm(9)
                                                                • 18.1 mm(5)
                                                                • 18.2 mm(5)
                                                                • 18.258 mm(5)
                                                                • 18.3 mm(4)
                                                                • 18.4 mm(3)
                                                                • 18.5 mm(8)
                                                                • 18.6 mm(4)
                                                                • 18.654 mm(5)
                                                                • 18.7 mm(7)
                                                                • 18.8 mm(6)
                                                                • 18.9 mm(4)
                                                                • 19.0 mm(9)
                                                                • 19.05 mm(5)
                                                                • 19.1 mm(4)
                                                                • 19.2 mm(5)
                                                                • 19.3 mm(4)
                                                                • 19.4 mm(5)
                                                                • 19.5 mm(8)
                                                                • 19.6 mm(2)
                                                                • 19.7 mm(5)
                                                                • 19.8 mm(5)
                                                                • 19.9 mm(4)
                                                                • 20.0 mm(9)
                                                                Cutting Diameter MintoCutting Diameter Max
                                                                Maximum Hole Depth [L4]
                                                                Maximum Hole Depth [L4]
                                                                • 5.0 mm(13)
                                                                • 6.0 mm(22)
                                                                • 9.0 mm(10)
                                                                • 10.0 mm(20)
                                                                • 12.0 mm(33)
                                                                • 14.0 mm(51)
                                                                • 15.0 mm(5)
                                                                • 17.0 mm(78)
                                                                • 20.0 mm(66)
                                                                • 22.0 mm(5)
                                                                • 23.0 mm(44)
                                                                • 24.0 mm(44)
                                                                • 25.0 mm(17)
                                                                • 29.0 mm(94)
                                                                • 33.0 mm(15)
                                                                • 35.0 mm(153)
                                                                • 40.0 mm(79)
                                                                • 41.0 mm(16)
                                                                • 43.0 mm(154)
                                                                • 45.0 mm(68)
                                                                • 48.0 mm(21)
                                                                • 49.0 mm(85)
                                                                • 51.0 mm(59)
                                                                • 55.0 mm(53)
                                                                • 56.0 mm(81)
                                                                • 57.0 mm(14)
                                                                • 60.0 mm(70)
                                                                • 63.0 mm(71)
                                                                • 64.0 mm(13)
                                                                • 71.0 mm(62)
                                                                • 77.0 mm(53)
                                                                • 80.0 mm(28)
                                                                • 96.0 mm(25)
                                                                • 112.0 mm(23)
                                                                • 128.0 mm(24)
                                                                • 144.0 mm(16)
                                                                • 160.0 mm(15)
                                                                Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
                                                                Maximum Hole Depth [L4]
                                                                Maximum Hole Depth [L4]
                                                                • 0.1969 in(13)
                                                                • 0.2362 in(22)
                                                                • 0.3543 in(10)
                                                                • 0.3937 in(20)
                                                                • 0.4724 in(33)
                                                                • 0.5512 in(51)
                                                                • 0.5906 in(5)
                                                                • 0.6693 in(78)
                                                                • 0.7874 in(66)
                                                                • 0.8661 in(5)
                                                                • 0.9055 in(44)
                                                                • 0.94 in(1)
                                                                • 0.9449 in(43)
                                                                • 0.9843 in(17)
                                                                • 1.1417 in(94)
                                                                • 1.2992 in(15)
                                                                • 1.378 in(153)
                                                                • 1.5748 in(79)
                                                                • 1.6142 in(16)
                                                                • 1.6929 in(154)
                                                                • 1.7717 in(68)
                                                                • 1.8898 in(21)
                                                                • 1.9291 in(85)
                                                                • 2.0079 in(59)
                                                                • 2.1654 in(53)
                                                                • 2.2047 in(81)
                                                                • 2.2441 in(14)
                                                                • 2.3622 in(70)
                                                                • 2.4803 in(71)
                                                                • 2.5197 in(13)
                                                                • 2.7953 in(62)
                                                                • 3.0315 in(53)
                                                                • 3.1496 in(28)
                                                                • 3.7795 in(25)
                                                                • 4.4094 in(23)
                                                                • 5.0394 in(24)
                                                                • 5.6693 in(16)
                                                                • 6.2992 in(15)
                                                                Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
                                                                Reach
                                                                Reach
                                                                • 0.2756 in(13)
                                                                • 0.3543 in(22)
                                                                • 0.4724 in(20)
                                                                • 0.5118 in(10)
                                                                • 0.6693 in(33)
                                                                • 0.7087 in(15)
                                                                • 0.7874 in(41)
                                                                • 0.8661 in(32)
                                                                • 0.9449 in(46)
                                                                • 1.0236 in(5)
                                                                • 1.1024 in(110)
                                                                • 1.1811 in(17)
                                                                • 1.3386 in(43)
                                                                • 1.4173 in(51)
                                                                • 1.4961 in(1)
                                                                • 1.5748 in(15)
                                                                • 1.6142 in(43)
                                                                • 1.7323 in(66)
                                                                • 1.8504 in(87)
                                                                • 1.9291 in(16)
                                                                • 2.0866 in(84)
                                                                • 2.1654 in(79)
                                                                • 2.2047 in(21)
                                                                • 2.3622 in(70)
                                                                • 2.4016 in(85)
                                                                • 2.5591 in(68)
                                                                • 2.6378 in(14)
                                                                • 2.7953 in(81)
                                                                • 2.874 in(59)
                                                                • 2.9134 in(13)
                                                                • 3.0315 in(70)
                                                                • 3.1102 in(53)
                                                                • 3.2677 in(71)
                                                                • 3.622 in(28)
                                                                • 3.6614 in(62)
                                                                • 3.9764 in(53)
                                                                • 4.3307 in(25)
                                                                • 5.0394 in(23)
                                                                • 5.748 in(24)
                                                                • 6.4173 in(16)
                                                                • 7.126 in(15)
                                                                Reach MintoReach Max
                                                                Reach
                                                                Reach
                                                                • 7.0 mm(13)
                                                                • 9.0 mm(22)
                                                                • 12.0 mm(20)
                                                                • 13.0 mm(10)
                                                                • 17.0 mm(33)
                                                                • 18.0 mm(15)
                                                                • 20.0 mm(41)
                                                                • 22.0 mm(32)
                                                                • 24.0 mm(46)
                                                                • 26.0 mm(5)
                                                                • 28.0 mm(110)
                                                                • 30.0 mm(17)
                                                                • 34.0 mm(43)
                                                                • 36.0 mm(51)
                                                                • 38.0 mm(1)
                                                                • 40.0 mm(15)
                                                                • 41.0 mm(43)
                                                                • 44.0 mm(66)
                                                                • 47.0 mm(87)
                                                                • 49.0 mm(16)
                                                                • 53.0 mm(84)
                                                                • 55.0 mm(79)
                                                                • 56.0 mm(21)
                                                                • 60.0 mm(70)
                                                                • 61.0 mm(85)
                                                                • 65.0 mm(68)
                                                                • 67.0 mm(14)
                                                                • 71.0 mm(81)
                                                                • 73.0 mm(59)
                                                                • 74.0 mm(13)
                                                                • 77.0 mm(70)
                                                                • 79.0 mm(53)
                                                                • 83.0 mm(71)
                                                                • 92.0 mm(28)
                                                                • 93.0 mm(62)
                                                                • 101.0 mm(53)
                                                                • 110.0 mm(25)
                                                                • 128.0 mm(23)
                                                                • 146.0 mm(24)
                                                                • 163.0 mm(16)
                                                                • 181.0 mm(15)
                                                                Reach MintoReach Max
                                                                Connection Style
                                                                Connection Style
                                                                • Straight-Cylindrical (1255)
                                                                • Whistle Notch 2 CylindricalEnd (445)
                                                                Internal Coolant Capability
                                                                Internal Coolant Capability
                                                                Over All Length [L]
                                                                Over All Length [L]
                                                                • 2.2835 in(145)
                                                                • 2.4409 in(41)
                                                                • 2.5984 in(178)
                                                                • 2.9134 in(51)
                                                                • 3.0709 in(15)
                                                                • 3.1102 in(87)
                                                                • 3.2283 in(66)
                                                                • 3.4252 in(16)
                                                                • 3.5039 in(87)
                                                                • 3.5827 in(84)
                                                                • 3.7008 in(21)
                                                                • 4.0157 in(79)
                                                                • 4.0551 in(85)
                                                                • 4.1339 in(14)
                                                                • 4.2126 in(70)
                                                                • 4.4488 in(13)
                                                                • 4.5276 in(68)
                                                                • 4.6457 in(81)
                                                                • 4.8425 in(59)
                                                                • 4.8819 in(70)
                                                                • 5.1575 in(53)
                                                                • 5.2362 in(71)
                                                                • 5.315 in(28)
                                                                • 5.6299 in(62)
                                                                • 6.0236 in(53)
                                                                • 6.2205 in(25)
                                                                • 6.9291 in(23)
                                                                • 7.7559 in(24)
                                                                • 8.4252 in(16)
                                                                • 9.2126 in(15)
                                                                Over All Length [L] MintoOver All Length [L] Max
                                                                Over All Length [L]
                                                                Over All Length [L]
                                                                • 58.0 mm(145)
                                                                • 62.0 mm(41)
                                                                • 66.0 mm(178)
                                                                • 74.0 mm(51)
                                                                • 78.0 mm(15)
                                                                • 79.0 mm(87)
                                                                • 82.0 mm(66)
                                                                • 87.0 mm(16)
                                                                • 89.0 mm(87)
                                                                • 91.0 mm(84)
                                                                • 94.0 mm(21)
                                                                • 102.0 mm(79)
                                                                • 103.0 mm(85)
                                                                • 105.0 mm(14)
                                                                • 107.0 mm(70)
                                                                • 113.0 mm(13)
                                                                • 115.0 mm(68)
                                                                • 118.0 mm(81)
                                                                • 123.0 mm(59)
                                                                • 124.0 mm(70)
                                                                • 131.0 mm(53)
                                                                • 133.0 mm(71)
                                                                • 135.0 mm(28)
                                                                • 143.0 mm(62)
                                                                • 153.0 mm(53)
                                                                • 158.0 mm(25)
                                                                • 176.0 mm(23)
                                                                • 197.0 mm(24)
                                                                • 214.0 mm(16)
                                                                • 234.0 mm(15)
                                                                Over All Length [L] MintoOver All Length [L] Max
                                                                application
                                                                Coating
                                                                Coating
                                                                • TiN (1699)
                                                                backEnd
                                                                Back-End Diameter
                                                                Back-End Diameter
                                                                • 4.0 mm(167)
                                                                • 6.0 mm(366)
                                                                • 8.0 mm(198)
                                                                • 10.0 mm(200)
                                                                • 12.0 mm(185)
                                                                • 14.0 mm(163)
                                                                • 16.0 mm(163)
                                                                • 18.0 mm(137)
                                                                • 20.0 mm(121)
                                                                Back-End Diameter MintoBack-End Diameter Max
                                                                Back-End Diameter
                                                                Back-End Diameter
                                                                • 0.1575 in(167)
                                                                • 0.2362 in(366)
                                                                • 0.315 in(198)
                                                                • 0.3937 in(200)
                                                                • 0.4724 in(185)
                                                                • 0.5512 in(163)
                                                                • 0.6299 in(163)
                                                                • 0.7087 in(137)
                                                                • 0.7874 in(121)
                                                                Back-End Diameter MintoBack-End Diameter Max
                                                                No filters matching ""
                                                                GOdrill™ • Multi Purpose Drill
                                                                GOdrill™ • 3xD • Straight Shank • Metric
                                                                (259)

                                                                GOdrill™ • 3xD • Straight Shank • Metric

                                                                GOdrill™ • 5xD • Straight Shank • Metric
                                                                (250)

                                                                GOdrill™ • 5xD • Straight Shank • Metric

                                                                GOdrill™ • 3xD • Internal Coolant • Straight Shank • Metric
                                                                (251)

                                                                GOdrill™ • 3xD • Internal Coolant • Straight Shank • Metric

                                                                GOdrill™ • 5xD • Internal Coolant • Straight Shank • Metric
                                                                (250)

                                                                GOdrill™ • 5xD • Internal Coolant • Straight Shank • Metric

                                                                GOdrill™ • 8xD • Internal Coolant • Straight Shank • Metric
                                                                (245)

                                                                GOdrill™ • 8xD • Internal Coolant • Straight Shank • Metric

                                                                GOdrill™ • 3 x D • Internal Coolant • Straight Shank • Metric
                                                                (115)

                                                                GOdrill™ • 3 x D • Internal Coolant • Straight Shank • Metric

                                                                GOdrill™ • 3 x D • Whistle Notch™ Shank • Metric
                                                                (97)

                                                                GOdrill™ • 3 x D • Whistle Notch™ Shank • Metric

                                                                GOdrill™ • 8 x D • Internal Coolant • Whistle Notch™ Shank • Metric
                                                                (2)

                                                                GOdrill™ • 8 x D • Internal Coolant • Whistle Notch™ Shank • Metric

                                                                GOdrill™ • 5 x D • Whistle Notch™ Shank • Metric
                                                                (88)

                                                                GOdrill™ • 5 x D • Whistle Notch™ Shank • Metric

                                                                GOdrill™ • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric
                                                                (143)

                                                                GOdrill™ • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric

                                                                Have Questions For Us?

                                                                Our skilled staff is ready to help.

                                                                Request More Information
                                                                Scroll Top
                                                                You are about to add to your My Solutions page. Do you want to proceed?
                                                                Select the destination where you want to move to.
                                                                New Folder
                                                                  • Applied Filters:
                                                                  • Clear All

                                                                A folder with the name already exists.

                                                                Special characters not allowed
                                                                Product successfully added to project __PROJECT_NAME__
                                                                product-image
                                                                Please adjust the following properties from

                                                                ISO Catalog Number

                                                                ANSI Catalog Number

                                                                to find similar products.

                                                                Models

                                                                You should be logged to see your dashboard information
                                                                Session expired due to inactivity, please login again
                                                                The product/s () you were trying to add to the cart is/are not available, please contact customer service
                                                                item(s) successfully added to the cart
                                                                View Cart

                                                                . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                                                Minimum quantity should be

                                                                SAP Material Number ISO Catalog Number Grade  

                                                                You are about to leave the Solution building process.

                                                                Are you sure you want to leave?

                                                                Workpiece Selection

                                                                Standard

                                                                ALL

                                                                Material

                                                                Select a Value

                                                                Hardness

                                                                --

                                                                    Hardness Scale

                                                                    --

                                                                      Permitted Groups :

                                                                      Group

                                                                      SubGroup

                                                                      Hardness (HB)

                                                                      Hardness (HRC)

                                                                      CancelOk