[an error occurred while processing this directive]
404 错误 - 未找到页面！
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
S 型夹持 •用于正向刀片
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (363)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(363)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(363)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(363)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(363)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(363)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(363)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(363)
- M Stainless Steel (363)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(363)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(363)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(363)
- K Cast Iron (363)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(363)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(363)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(363)
- N Non-Ferrous Materials (363)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (363)
- N3High-Silicon Aluminum Alloys Si >12.2%(258)
- N1Wrought Aluminum (363)
- N7MMC's (316)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(363)
- N6Carbon, Graphite Composites, CFRP (363)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (363)
- S High-Temp Alloys (363)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(363)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(363)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(363)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(363)
- H Hardened Materials (307)
- H2Hardened Materials 48-55 HRC(307)
- H4Hardened Materials >60 HRC(279)
- H3Hardened Materials 56-60 HRC(283)
- H1Hardened Materials 44-48 HRC(307)
- C CFRP Materials (363)
- C1CFRP, CFRP / CFRP (363)
- C2CFRP / Aluminium CFRP / Non-Ferrous (316)
Select First Choice
- CN (62)
- DE (60)
- GB (39)
- IN (2)
- SG (10)
- US (77)
Applications
Applications
Facing (183)
Multiple Direction Cutting (297)
Profiling (284)
TRN Boring (15)
Turning (354)
Cutting Condition Material
Cutting Condition Material
- H-All (329)
- K-All (358)
- M-All (363)
- N-All (329)
- P-All (363)
- S-All (363)
- S4 (51)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (358)
- Lightly Interrupted Cut (363)
- Smooth Cut (363)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (32)
- 50.0 (9)
- 62.5 (13)
- 72.5 (7)
- 75.0 (10)
- 90.0 (107)
- 93.0 (104)
- 95.0 (59)
- 107.5 (24)
to
Connection Style
Connection Style
- KM (9)
- Toolholder (341)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (320)
- 2.0 (262)
- 3.0 (34)
- 4.0 (112)
to
Over All Length [L]
Over All Length [L]
- 0.63 in(1)
- 1.378 in(10)
- 1.5748 in(5)
- 1.575 in(8)
- 1.7717 in(1)
- 2.5 in(22)
- 3.25 in(1)
- 3.5 in(32)
- 3.937 in(35)
- 4.0 in(18)
- 4.5 in(32)
- 4.921 in(13)
- 4.9213 in(28)
- 5.9055 in(33)
- 5.906 in(23)
- 6.0 in(80)
- 6.299 in(9)
- 6.2992 in(11)
- 6.6929 in(3)
to
Over All Length [L]
Over All Length [L]
- 35.0 mm(10)
- 40.0 mm(13)
- 45.0 mm(1)
- 63.5 mm(22)
- 82.55 mm(1)
- 88.9 mm(32)
- 100.0 mm(35)
- 101.6 mm(18)
- 114.3 mm(32)
- 125.0 mm(41)
- 150.0 mm(56)
- 152.4 mm(80)
- 160.0 mm(21)
- 170.0 mm(3)
to
Corner Radius
Corner Radius
- 0.0 in(81)
- 0.001 in(186)
- 0.002 in(243)
- 0.004 in(284)
- 0.008 in(284)
- 0.016 in(312)
- 0.031 in(313)
- 0.047 in(186)
- 0.063 in(47)
- 0.118 in(1)
- 0.125 in(12)
- 0.157 in(6)
- 0.187 in(13)
- 0.188 in(13)
- 0.197 in(7)
- 0.236 in(4)
- 0.25 in(6)
- 0.315 in(1)
to
Corner Radius
Corner Radius
- 0.0 mm(81)
- 0.025 mm(186)
- 0.05 mm(243)
- 0.1 mm(284)
- 0.2 mm(284)
- 0.4 mm(312)
- 0.8 mm(313)
- 1.2 mm(186)
- 1.6 mm(47)
- 3.0 mm(1)
- 3.175 mm(12)
- 4.0 mm(6)
- 4.75 mm(13)
- 4.775 mm(13)
- 5.0 mm(7)
- 6.0 mm(4)
- 6.35 mm(6)
- 8.0 mm(1)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (4)
- AC5 (4)
- CM3 (10)
- CM5 (4)
- CPX (4)
- GH1 (55)
- GH2 (7)
- HCK10 (16)
- HK1500 (15)
- HK35 (22)
- HT2 (259)
- HTX (253)
- HWK15 (19)
- K1010P (55)
- K10M (227)
- K10P (116)
- K10U (261)
- K15U (243)
- K20K (160)
- K25M (111)
- K25P (117)
- K313 (356)
- K420 (13)
- K68 (323)
- KB1345 (110)
- KB1610 (218)
- KB1625 (96)
- KB1630 (87)
- KB5610 (231)
- KB5625 (208)
- KB5630 (190)
- KB9610 (219)
- KBH10 (230)
- KBH20 (268)
- KC250 (21)
- KC5010 (363)
- KC5020P (151)
- KC5025 (330)
- KC5410 (326)
- KC710 (17)
- KC720 (312)
- KC730 (357)
- KC7310 (17)
- KC732 (302)
- KC8050 (356)
- KC810 (315)
- KC850 (363)
- KC9010 (207)
- KC9025 (302)
- KC910 (330)
- KC9105 (301)
- KC9110 (329)
- KC9120 (196)
- KC9125 (323)
- KC9225 (312)
- KC9240 (362)
- KC9240NEW (362)
- KC9315 (356)
- KC9320 (318)
- KC9325 (200)
- KC935 (313)
- KC950 (259)
- KC990 (215)
- KCD25 (263)
- KCK05 (307)
- KCK05B (232)
- KCK15 (232)
- KCK15B (273)
- KCK20 (357)
- KCK20B (345)
- KCM15 (296)
- KCM15B (235)
- KCM25 (357)
- KCM25B (305)
- KCM25S (147)
- KCM35 (241)
- KCM35B (133)
- KCP05 (307)
- KCP05B (70)
- KCP10 (311)
- KCP10B (322)
- KCP15 (28)
- KCP20S (147)
- KCP25 (352)
- KCP25B (323)
- KCP25C (357)
- KCP30 (310)
- KCP30B (68)
- KCP40B (28)
- KCPK05 (16)
- KCS10 (357)
- KCS10B (319)
- KCS25S (147)
- KCU10 (339)
- KCU10B (363)
- KCU25 (318)
- KCU25B (330)
- KD050 (159)
- KD081 (136)
- KD100 (51)
- KD105 (23)
- KD120 (23)
- KD1400 (270)
- KD1405 (51)
- KD1425 (270)
- KN10S (186)
- KT125 (76)
- KT150 (21)
- KT175 (263)
- KT315 (313)
- KT325 (269)
- KTP10 (277)
- KTP25S (261)
- KU10 (257)
- KU10T (307)
- KU30T (307)
- KY1615 (4)
- MC2 (4)
- NL300 (16)
- NL920 (20)
- PB100 (13)
- PB170 (1)
- PB250 (14)
- PD100 (16)
- PD50 (14)
- SP0G00 (3)
- SP0PW3 (1)
- SP4019 (20)
- SP7779 (7)
- SPMQMA (4)
- SPN3W1 (2)
- THM (30)
- THM-X (16)
- TN10P (24)
- TN10U (24)
- TN15M (19)
- TN15U (15)
- TN2000 (16)
- TN20K (24)
- TN20P (24)
- TN30M (19)
- TN4000 (5)
- TN5015 (24)
- TN5020 (21)
- TN5105 (24)
- TN5120 (24)
- TN6010 (21)
- TN6025 (20)
- TN7005 (15)
- TN7010 (24)
- TN7015 (24)
- TN7025 (24)
- TN7035 (28)
- TN7105 (19)
- TN7110 (24)
- TN7115 (24)
- TN7125 (24)
- TN7135 (24)
- TN8025 (24)
- TTI15 (18)
- TTM (2)
- TTM09 (8)
- TTR (24)
- TTS (2)
- TTX (18)
- W00342 (19)
- WBH10C (15)
- WBH10P (15)
- WBH10U (15)
- WBH20P (16)
- WBH25P (15)
- WBH25U (13)
- WBH30P (15)
- WBK45U (16)
- WDN00U (2)
- WDN25U (15)
- WK05CT (24)
- WK15CT (19)
- WK20CT (24)
- WM15CT (19)
- WM25CT (24)
- WP15CT (24)
- WP20TT (13)
- WP25CT (24)
- WP35CT (24)
- WS10PT (21)
- WS25PT (20)
- WU05PT (16)
- WU10HT (16)
- WU10PT (19)
- WU25PT (19)
- YY3A00 (16)
Hand Of Tool
Hand Of Tool
- L (136)
- N (50)
- R (164)
Wiper Insert
Wiper Insert
- N (363)
- Y (88)
F Dimension
F Dimension
- 0.0 mm(3)
- 4.762 mm(3)
- 5.0 mm(1)
- 6.0 mm(5)
- 6.35 mm(5)
- 7.925 mm(1)
- 7.938 mm(1)
- 8.0 mm(5)
- 9.52 mm(13)
- 9.525 mm(4)
- 10.0 mm(10)
- 11.0 mm(1)
- 11.12 mm(1)
- 11.15 mm(2)
- 12.0 mm(15)
- 12.5 mm(3)
- 12.7 mm(42)
- 13.0 mm(4)
- 13.64 mm(2)
- 13.92 mm(1)
- 13.95 mm(1)
- 14.0 mm(1)
- 14.275 mm(1)
- 15.0 mm(1)
- 15.875 mm(8)
- 15.88 mm(25)
- 16.0 mm(26)
- 16.5 mm(1)
- 17.02 mm(2)
- 17.09 mm(1)
- 17.475 mm(1)
- 17.5 mm(1)
- 18.5 mm(1)
- 18.95 mm(2)
- 19.05 mm(13)
- 20.0 mm(27)
- 20.5 mm(1)
- 20.638 mm(1)
- 21.08 mm(2)
- 22.0 mm(3)
- 24.26 mm(2)
- 25.0 mm(24)
- 25.4 mm(15)
- 25.908 mm(4)
- 25.91 mm(1)
- 27.0 mm(4)
- 31.75 mm(19)
- 32.0 mm(28)
- 32.258 mm(4)
- 32.26 mm(2)
- 38.1 mm(4)
- 38.608 mm(2)
to
F Dimension
F Dimension
- 0.0 in(3)
- 0.126 in(2)
- 0.1875 in(2)
- 0.1969 in(1)
- 0.236 in(1)
- 0.2362 in(4)
- 0.25 in(5)
- 0.3125 in(2)
- 0.315 in(5)
- 0.375 in(17)
- 0.3937 in(8)
- 0.394 in(2)
- 0.4331 in(1)
- 0.4375 in(1)
- 0.439 in(2)
- 0.472 in(8)
- 0.4724 in(7)
- 0.492 in(1)
- 0.4921 in(2)
- 0.5 in(42)
- 0.5118 in(4)
- 0.537 in(2)
- 0.548 in(2)
- 0.5512 in(1)
- 0.562 in(1)
- 0.5906 in(1)
- 0.625 in(33)
- 0.6299 in(16)
- 0.63 in(10)
- 0.6496 in(1)
- 0.67 in(2)
- 0.673 in(1)
- 0.688 in(1)
- 0.689 in(1)
- 0.7283 in(1)
- 0.746 in(2)
- 0.75 in(13)
- 0.787 in(12)
- 0.7874 in(15)
- 0.8071 in(1)
- 0.8125 in(1)
- 0.83 in(2)
- 0.8661 in(3)
- 0.955 in(2)
- 0.984 in(10)
- 0.9843 in(13)
- 0.99 in(1)
- 1.0 in(15)
- 1.02 in(5)
- 1.063 in(4)
- 1.25 in(19)
- 1.2598 in(20)
- 1.26 in(6)
- 1.27 in(6)
- 1.5 in(4)
- 1.52 in(2)
- 1.875 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 44.0 mm(7)
- 50.0 mm(8)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.732 in(6)
- 1.7323 in(1)
- 1.969 in(8)
to
Cutting Direction
Cutting Direction
- B (71)
- E (33)
- S (246)
Rake Angle Style
Rake Angle Style
- DOUBLE POSITIVE (18)
- NEUTRAL (ZERO) (321)
- POSITIVE-ZERO (11)
Maximum Bore Depth
Maximum Bore Depth
- 1.378 in(7)
- 1.575 in(8)
to
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(7)
- 40.0 mm(8)
to
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (100)
- D-DIAMOND/RHOMBIC 55 (95)
- R-ROUND (52)
- S-SQUARE 90 (17)
- T-TRIANGLE 60 (33)
- V-DIAMOND/RHOMBIC 35 (67)
- W-TRIGON 80 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.2756 in(2)
- 0.3091 in(2)
- 0.4 in(2)
- 0.41 in(1)
- 0.43 in(2)
- 0.4646 in(2)
- 0.4724 in(1)
- 0.4776 in(2)
- 0.5008 in(2)
- 0.62 in(1)
- 0.6299 in(3)
- 0.75 in(2)
- 0.7874 in(3)
- 0.81 in(3)
- 0.9843 in(4)
- 1.0 in(15)
- 1.02 in(4)
- 1.25 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 7.0 mm(2)
- 7.85 mm(2)
- 10.16 mm(2)
- 10.414 mm(1)
- 10.922 mm(2)
- 11.8 mm(2)
- 12.0 mm(1)
- 12.13 mm(2)
- 12.72 mm(2)
- 15.88 mm(1)
- 16.0 mm(3)
- 19.05 mm(2)
- 20.0 mm(3)
- 20.574 mm(3)
- 25.0 mm(4)
- 25.4 mm(15)
- 25.908 mm(4)
- 31.75 mm(1)
to
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (240)
- B L (279)
- C A (4)
- C N (2)
- D P (271)
- H T (317)
- H W (363)
backEnd
Connection Type
Connection Type
- SQUARE SHANK (341)
- TAPER SHANK (9)
System Size
System Size
- KM32 (3)
- KM40TS (6)
Back-End Diameter
Back-End Diameter
- 32.0 mm(10)
- 40.0 mm(14)
to
Shank Height
Shank Height
- 0.3125 in(2)
- 0.315 in(1)
- 0.375 in(34)
- 0.3937 in(8)
- 0.394 in(2)
- 0.472 in(11)
- 0.4724 in(23)
- 0.5 in(59)
- 0.625 in(31)
- 0.6299 in(33)
- 0.63 in(10)
- 0.75 in(19)
- 0.787 in(11)
- 0.7874 in(21)
- 0.984 in(6)
- 0.9843 in(27)
- 1.0 in(27)
- 1.25 in(11)
- 1.2598 in(3)
- 1.5 in(2)
to
Shank Height
Shank Height
- 7.938 mm(2)
- 8.0 mm(1)
- 9.52 mm(22)
- 9.525 mm(12)
- 10.0 mm(10)
- 12.0 mm(34)
- 12.7 mm(59)
- 15.875 mm(4)
- 15.88 mm(27)
- 16.0 mm(43)
- 19.05 mm(19)
- 20.0 mm(32)
- 25.0 mm(33)
- 25.4 mm(27)
- 31.75 mm(11)
- 32.0 mm(3)
- 38.1 mm(2)
to
Shank Width
Shank Width
- 0.3125 in(2)
- 0.315 in(1)
- 0.375 in(34)
- 0.3937 in(8)
- 0.394 in(2)
- 0.472 in(11)
- 0.4724 in(23)
- 0.5 in(58)
- 0.625 in(32)
- 0.6299 in(33)
- 0.63 in(10)
- 0.75 in(19)
- 0.787 in(10)
- 0.7874 in(21)
- 0.878 in(1)
- 0.984 in(6)
- 0.9843 in(30)
- 1.0 in(27)
- 1.25 in(11)
- 1.5 in(2)
to
Shank Width
Shank Width
- 7.938 mm(2)
- 8.0 mm(1)
- 9.52 mm(21)
- 9.525 mm(13)
- 10.0 mm(10)
- 12.0 mm(34)
- 12.7 mm(58)
- 15.875 mm(6)
- 15.88 mm(26)
- 16.0 mm(43)
- 19.05 mm(19)
- 20.0 mm(32)
- 25.0 mm(36)
- 25.4 mm(27)
- 31.75 mm(11)
- 38.1 mm(2)
to
other
Insert Hand
Insert Hand
- L (214)
- N (363)
- R (223)
No filters matching ""
