[an error occurred while processing this directive]
404 错误 - 未找到页面！
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
KM63XMZ™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (25)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(25)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(25)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(25)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(25)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
- M Stainless Steel (25)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(25)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(25)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(25)
- K Cast Iron (25)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
- N Non-Ferrous Materials (25)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
- N6Carbon, Graphite Composites, CFRP (25)
- N1Wrought Aluminum (25)
- N3High-Silicon Aluminum Alloys Si >12.2%(18)
- N7MMC's (23)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(25)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
- S High-Temp Alloys (25)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(25)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(25)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(25)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(25)
- H Hardened Materials (25)
- H2Hardened Materials 48-55 HRC(25)
- H4Hardened Materials >60 HRC(23)
- H1Hardened Materials 44-48 HRC(25)
- H3Hardened Materials 56-60 HRC(23)
- C CFRP Materials (25)
- C2CFRP / Aluminium CFRP / Non-Ferrous (23)
- C1CFRP, CFRP / CFRP (25)
Applications
Applications
Cut-Off (3)
Deep Grooving (3)
Facing (20)
Grooving (3)
Multiple Direction Cutting (24)
Profiling (28)
TRN Boring (16)
Turning (25)
Cutting Condition Material
Cutting Condition Material
- H-All (23)
- K-All (25)
- K1 (9)
- M-All (25)
- N-All (25)
- P-All (25)
- S-All (25)
- S2 (22)
- S4 (16)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (25)
- Lightly Interrupted Cut (25)
- Smooth Cut (25)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 48.0 (6)
- 49.783 (1)
- 50.0 (2)
- 93.0 (8)
- 95.0 (8)
to
Connection Style
Connection Style
- KM (5)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (21)
- 2.0 (23)
- 3.0 (2)
- 4.0 (22)
- 6.0 (2)
- 8.0 (13)
to
Over All Length [L]
Over All Length [L]
- 2.362 in(7)
- 2.3622 in(5)
- 4.528 in(9)
- 4.9213 in(4)
to
Over All Length [L]
Over All Length [L]
- 60.0 mm(12)
- 115.0 mm(9)
- 125.0 mm(4)
to
Corner Radius
Corner Radius
- 0.002 in(1)
- 0.004 in(23)
- 0.008 in(20)
- 0.014 in(3)
- 0.016 in(25)
- 0.024 in(2)
- 0.031 in(25)
- 0.047 in(25)
- 0.062 in(7)
- 0.063 in(18)
- 0.094 in(6)
- 0.126 in(2)
to
Corner Radius
Corner Radius
- 0.05 mm(1)
- 0.1 mm(23)
- 0.2 mm(20)
- 0.35 mm(3)
- 0.4 mm(25)
- 0.6 mm(2)
- 0.8 mm(25)
- 1.2 mm(25)
- 1.575 mm(7)
- 1.6 mm(18)
- 2.375 mm(6)
- 2.4 mm(2)
- 3.2 mm(2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (20)
- 241 (7)
- CL4 (10)
- CM2 (20)
- CM3 (10)
- CM4 (9)
- CPX (16)
- CW2 (10)
- CW2015 (20)
- CW5025 (22)
- GX (7)
- HK1500 (13)
- HT2 (13)
- HTX (8)
- K060 (11)
- K090 (20)
- K1 (7)
- K10M (23)
- K10P (22)
- K10U (21)
- K15U (21)
- K20K (22)
- K21 (7)
- K25M (25)
- K25P (21)
- K313 (25)
- K35P (11)
- K420 (17)
- K45 (15)
- K68 (21)
- KB1340 (9)
- KB1345 (11)
- KB1610 (18)
- KB1625 (16)
- KB1630 (15)
- KB5610 (18)
- KB5625 (16)
- KB5630 (16)
- KB9610 (21)
- KB9640 (11)
- KBH10 (21)
- KBH10B (18)
- KBH20 (21)
- KBH20B (18)
- KBK35 (7)
- KC210 (14)
- KC250 (13)
- KC5010 (25)
- KC5020P (1)
- KC5025 (25)
- KC5410 (23)
- KC5510 (24)
- KC5525 (18)
- KC710 (7)
- KC720 (20)
- KC722 (7)
- KC730 (22)
- KC7310 (24)
- KC732 (20)
- KC8050 (25)
- KC810 (25)
- KC850 (25)
- KC9010 (24)
- KC9025 (25)
- KC910 (23)
- KC9105 (25)
- KC9110 (25)
- KC9120 (24)
- KC9125 (25)
- KC9140 (24)
- KC9145 (22)
- KC9210 (3)
- KC9215 (24)
- KC9225 (25)
- KC9240 (25)
- KC9240NEW (25)
- KC9245 (24)
- KC9315 (25)
- KC9320 (25)
- KC9325 (24)
- KC935 (25)
- KC950 (23)
- KC990 (24)
- KCD25 (5)
- KCK05 (25)
- KCK05B (25)
- KCK15 (25)
- KCK15B (25)
- KCK20 (25)
- KCK20B (25)
- KCM15 (25)
- KCM15B (25)
- KCM25 (25)
- KCM25B (25)
- KCM35 (23)
- KCM35B (14)
- KCP05 (25)
- KCP05B (23)
- KCP10 (25)
- KCP10B (25)
- KCP15 (1)
- KCP25 (25)
- KCP25B (25)
- KCP25C (25)
- KCP30 (25)
- KCP30B (18)
- KCP40 (18)
- KCP40B (23)
- KCPK05 (24)
- KCS10 (8)
- KCS10B (25)
- KCU10 (25)
- KCU10B (25)
- KCU25 (25)
- KCU25B (25)
- KD050 (16)
- KD081 (16)
- KD100 (16)
- KD120 (15)
- KD1400 (18)
- KD1405 (16)
- KD1425 (18)
- KM1 (7)
- KMF (7)
- KS15 (7)
- KT1120 (10)
- KT125 (18)
- KT150 (15)
- KT175 (19)
- KT315 (23)
- KT325 (13)
- KT5020 (4)
- KTP10 (23)
- KTP25S (21)
- KU10 (1)
- KU10T (23)
- KU30T (25)
- KY1310 (15)
- KY1320 (22)
- KY1540 (11)
- KY1615 (20)
- KY2000 (13)
- KY2100 (11)
- KY3000 (20)
- KY3400 (15)
- KY3500 (22)
- KY4000 (13)
- KY4300 (13)
- KY4400 (22)
- KYHK15B (22)
- KYK10 (13)
- KYK25 (15)
- KYK35 (22)
- KYS25 (11)
- KYS30 (13)
- NL200 (10)
- NL250 (24)
- NL300 (12)
- NL400 (11)
- NL920 (18)
- P25 (7)
- PB100 (7)
- PB170 (7)
- PB250 (7)
- PB300 (7)
- PS5 (12)
- SP0819 (14)
- SP3019 (11)
- SP4019 (15)
- SP4036 (4)
- SP4093 (4)
- THM (8)
- THM-X (10)
- THMF-X (7)
- TN10P (25)
- TN10U (21)
- TN15M (23)
- TN15U (21)
- TN2000 (13)
- TN20K (23)
- TN20P (25)
- TN30M (25)
- TN30P (18)
- TN4000 (13)
- TN5015 (18)
- TN5020 (17)
- TN5105 (18)
- TN5120 (21)
- TN6010 (18)
- TN6025 (12)
- TN7005 (19)
- TN7010 (21)
- TN7015 (21)
- TN7025 (21)
- TN7035 (15)
- TN7105 (15)
- TN7110 (21)
- TN7115 (21)
- TN7125 (17)
- TN7135 (15)
- TN8025 (20)
- TTI15 (13)
- TTR (7)
- TTS (10)
- TTX (11)
- WBH10C (21)
- WBH10P (16)
- WBH10U (18)
- WBH20P (20)
- WBH25P (16)
- WBH25U (15)
- WBH30P (16)
- WBK40U (9)
- WBK45U (14)
- WDN00U (11)
- WDN25U (18)
- WK05CT (24)
- WK15CT (13)
- WK20CT (25)
- WM15CT (25)
- WM25CT (25)
- WM35CT (24)
- WP05CT (9)
- WP15CT (25)
- WP20TT (2)
- WP25CT (25)
- WP35CT (25)
- WS10PT (24)
- WS25PT (24)
- WU10HT (25)
- WU10PT (19)
- WU25PT (19)
- X00511 (7)
- X00580 (7)
- X00581 (7)
- X00582 (7)
- X00583 (7)
- X00584 (7)
- X00585 (7)
- X00586 (7)
- X00591 (7)
- X00592 (7)
- X00593 (7)
- X00594 (7)
- X00596 (7)
- X00597 (7)
- X00599 (7)
Hand Of Tool
Hand Of Tool
- L (2)
- R (3)
Wiper Insert
Wiper Insert
- N (25)
- Y (11)
F Dimension
F Dimension
- 43.0 mm(5)
to
F Dimension
F Dimension
- 1.6929 in(5)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(4)
- 86.0 mm(7)
- 100.0 mm(9)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.2598 in(4)
- 3.386 in(7)
- 3.937 in(9)
to
Cutting Direction
Cutting Direction
- S (5)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (5)
Maximum Bore Depth
Maximum Bore Depth
- 2.362 in(7)
- 3.445 in(4)
- 4.528 in(9)
to
Maximum Bore Depth
Maximum Bore Depth
- 60.0 mm(7)
- 87.5 mm(4)
- 115.0 mm(9)
to
frontEnd
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (9)
- COMBI SHELL ADAPTER (10)
- CUTOFF SUPPORT BLADE (4)
- DRILL CHUCK ADAPTER (2)
- END MILL ADAPTER (10)
- ER COLLET CHUCK (9)
- EXTENSION (2)
- HYDRAULIC CHUCK (4)
- HYDRAULIC CHUCK-HIGH TORQUE (2)
- HYDRAULIC CHUCK-SLIM LINE (7)
- KM MODULAR ADAPTER (6)
- KM MODULAR ADAPTER-4 UNITS (1)
- REDUCER (8)
- SQUARE SHANK ADAPTER (2)
- SQUARE SHANK ADAPTER-2 SLOTS (2)
- SQUARE SHANK ADAPTER-4 SLOTS (1)
- WHISTLE NOTCH ADAPTER (10)
Clamp Style
Clamp Style
- M (17)
- P (7)
- S (1)
Front End Type
Front End Type
- FDA - Milling Cutter Arbor (10)
- KMS - KM TBD System (1)
- KMT - KM Adapter (16)
- MCS - Modular Cartridge System (9)
- PMK - Prismatic Adapter Kenna (4)
- SZK - Collet Taper (9)
- VKT - Square Shank (5)
- ZYL - Cylindrical Adapter (35)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (9)
- D-DIAMOND/RHOMBIC 55 (9)
- V-DIAMOND/RHOMBIC 35 (5)
- W-TRIGON 80 (2)
Front End Style
Front End Style
- FDA03 Longit &Transver Drive (1)
- FDA13 Long&TranDrv&CutRetScr (5)
- FDA23 Longit&Transv Drv&SHCS (4)
- KMS-01 Std KM-TBD NotOnCntr (1)
- KMT00 All KM, except 02,05,09 (16)
- MCS01 Modular Deep Grooving (9)
- PMK02 Cutoff Sup Bld A1-A3 (4)
- SZK02 Collets 8 Degree Taper (9)
- VKT01 Std Design (5)
- ZYL01 Straight Shank (15)
- ZYL13 2Deg-Whistle Notch (10)
- ZYL14 Weldon+Whistle Notch (10)
Gage Length
Gage Length
- 1.1136 in(2)
- 1.3880 in(2)
- 1.5748 in(1)
- 1.5750 in(1)
- 1.6930 in(1)
- 1.8500 in(2)
- 2.2992 in(1)
- 2.3030 in(2)
- 2.3031 in(1)
- 2.3600 in(1)
- 2.3622 in(5)
- 2.4800 in(4)
- 2.5000 in(4)
- 2.5590 in(1)
- 2.5591 in(1)
- 2.7559 in(2)
- 2.9528 in(2)
- 2.9530 in(1)
- 3.0550 in(1)
- 3.1496 in(14)
- 3.3460 in(1)
- 3.3465 in(2)
- 3.5000 in(1)
- 3.5430 in(1)
- 3.5433 in(2)
- 3.7402 in(2)
- 3.9193 in(1)
- 3.9290 in(1)
- 3.9370 in(4)
- 4.0830 in(1)
- 4.1181 in(2)
- 4.3307 in(1)
- 4.3310 in(3)
- 4.5315 in(1)
- 4.7244 in(4)
- 4.8740 in(2)
- 6.2990 in(3)
- 6.6930 in(4)
- 9.2340 in(1)
- 12.2330 in(1)
- 14.2330 in(1)
- 15.2330 in(1)
- 16.2330 in(1)
- 20.2330 in(1)
Gage Length
Gage Length
- 28.2860 mm(2)
- 35.2500 mm(2)
- 40.0000 mm(2)
- 43.0000 mm(1)
- 47.0000 mm(2)
- 58.4000 mm(1)
- 58.5000 mm(3)
- 60.0000 mm(6)
- 63.0000 mm(4)
- 63.5000 mm(4)
- 65.0000 mm(2)
- 70.0000 mm(2)
- 75.0000 mm(3)
- 77.6000 mm(1)
- 80.0000 mm(14)
- 85.0000 mm(3)
- 88.9000 mm(1)
- 90.0000 mm(3)
- 95.0000 mm(2)
- 99.5500 mm(1)
- 99.8000 mm(1)
- 100.0000 mm(4)
- 103.7000 mm(1)
- 104.6000 mm(2)
- 110.0000 mm(4)
- 115.1000 mm(1)
- 120.0000 mm(4)
- 123.8000 mm(2)
- 160.0000 mm(3)
- 170.0000 mm(4)
- 234.5500 mm(1)
- 310.7100 mm(1)
- 361.5200 mm(1)
- 386.9200 mm(1)
- 412.3200 mm(1)
- 513.9200 mm(1)
Front End Size
Front End Size
- 0.5 in(1)
- 3.0 in(1)
- 6.0 in(3)
- 8.0 in(3)
- 10.0 in(3)
- 12.0 in(3)
- 14.0 in(3)
- 16.0 in(4)
- 18.0 in(1)
- 19.05 in(1)
- 20.0 in(4)
- 22.0 in(3)
- 25.0 in(2)
- 27.0 in(3)
- 31.75 in(2)
- 32.0 in(8)
- 40.0 in(9)
- 50.0 in(5)
- 63.0 in(2)
to
Front End Size
Front End Size
- 0.5 mm(1)
- 3.0 mm(1)
- 6.0 mm(3)
- 8.0 mm(3)
- 10.0 mm(3)
- 12.0 mm(3)
- 14.0 mm(3)
- 16.0 mm(4)
- 18.0 mm(1)
- 19.05 mm(1)
- 20.0 mm(4)
- 22.0 mm(3)
- 25.0 mm(2)
- 27.0 mm(3)
- 31.75 mm(2)
- 32.0 mm(8)
- 40.0 mm(9)
- 50.0 mm(5)
- 63.0 mm(2)
to
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (23)
- B L (21)
- C A (22)
- C N (22)
- D P (21)
- H T (23)
- H W (25)
backEnd
Connection Type
Connection Type
- TAPER SHANK (5)
System Size
System Size
- KM63XMZ (96)
Back-End Diameter
Back-End Diameter
- 63.0 mm(116)
to
Back-End Diameter
Back-End Diameter
- 2.478 in(13)
- 2.48 in(6)
- 2.4803 in(72)
to
other
Insert Hand
Insert Hand
- L (1)
- N (25)
- R (1)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
