[an error occurred while processing this directive]
404 错误 - 未找到页面！
[an error occurred while processing this directive]
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
404 错误 - 未找到页面！
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
-
- Applied Filters:
- Clear All
Product successfully added to project __PROJECT_NAME__
Please adjust the following properties from
ISO Catalog Number
ANSI Catalog Number
to find similar products.Models
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please
contact customer service
item(s) successfully added to the cart
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
Romicron®
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (630)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(630)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(630)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(630)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(630)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(630)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(630)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(630)
- M Stainless Steel (513)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(513)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(513)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(513)
- K Cast Iron (502)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(501)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(500)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(500)
- N Non-Ferrous Materials (375)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (375)
- N7MMC's (114)
- N1Wrought Aluminum (347)
- N3High-Silicon Aluminum Alloys Si >12.2%(105)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(357)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (369)
- N6Carbon, Graphite Composites, CFRP (349)
- S High-Temp Alloys (484)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(483)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(452)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(483)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(483)
- H Hardened Materials (234)
- H2Hardened Materials 48-55 HRC(186)
- H3Hardened Materials 56-60 HRC(109)
- H1Hardened Materials 44-48 HRC(234)
- H4Hardened Materials >60 HRC(109)
- C CFRP Materials (192)
- C1CFRP, CFRP / CFRP (184)
- C2CFRP / Aluminium CFRP / Non-Ferrous (113)
Select First Choice
- IN (25)
- US (1)
Applications
Applications
Blind Hole Finishing (55)
Boring (2)
Facing (2)
ID Facing (2)
Multiple Direction Cutting (12)
Profiling (1)
Through Hole Finishing (55)
Turning (2)
Cutting Condition Material
Cutting Condition Material
- H-All (66)
- K-All (229)
- M-All (297)
- N-All (81)
- P-All (209)
- S-All (280)
- S4 (48)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (215)
- Lightly Interrupted Cut (356)
- Smooth Cut (555)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (49)
- 95.0 (2)
to
Connection Style
Connection Style
- Whistle Notch 2 Front (12)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (3)
- 1.0 (36)
- 2.0 (352)
- 3.0 (229)
- 4.0 (72)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.7539 in(3)
- 0.756 in(3)
- 0.7756 in(7)
- 0.929 in(2)
- 0.931 in(1)
- 0.9311 in(2)
- 0.935 in(1)
- 0.9704 in(1)
- 0.9705 in(2)
- 1.047 in(2)
- 1.053 in(1)
- 1.162 in(1)
- 1.2087 in(2)
- 1.209 in(1)
- 1.358 in(1)
- 1.437 in(1)
- 1.5236 in(2)
- 1.524 in(1)
- 1.634 in(1)
- 2.0 in(1)
- 2.1961 in(1)
- 2.2717 in(1)
- 2.3862 in(1)
- 2.441 in(1)
- 2.695 in(1)
- 3.089 in(1)
- 3.1496 in(1)
- 3.168 in(1)
- 3.561 in(1)
- 3.5614 in(1)
to
Over All Length [L]
Over All Length [L]
- 19.15 mm(3)
- 19.2 mm(3)
- 19.7 mm(7)
- 23.6 mm(2)
- 23.65 mm(3)
- 23.75 mm(1)
- 24.65 mm(3)
- 26.6 mm(2)
- 26.75 mm(1)
- 29.5 mm(1)
- 30.7 mm(3)
- 34.5 mm(1)
- 36.5 mm(1)
- 38.7 mm(3)
- 41.5 mm(1)
- 50.8 mm(1)
- 55.8 mm(1)
- 57.7 mm(1)
- 60.61 mm(1)
- 62.0 mm(1)
- 68.46 mm(1)
- 78.46 mm(1)
- 80.0 mm(1)
- 80.31 mm(1)
- 90.45 mm(1)
- 90.46 mm(1)
to
Corner Radius
Corner Radius
- 0.002 in(10)
- 0.004 in(108)
- 0.007 in(27)
- 0.008 in(186)
- 0.015 in(20)
- 0.016 in(344)
- 0.031 in(320)
- 0.047 in(9)
to
Corner Radius
Corner Radius
- 0.05 mm(10)
- 0.1 mm(108)
- 0.175 mm(27)
- 0.2 mm(186)
- 0.375 mm(20)
- 0.4 mm(344)
- 0.8 mm(320)
- 1.2 mm(9)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(700)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(700)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K00379 (3)
- K313 (100)
- K420 (2)
- K68 (96)
- KB1345 (11)
- KB1610 (91)
- KB1630 (11)
- KB5610 (90)
- KB5625 (10)
- KB5630 (11)
- KB9610 (10)
- KBH10 (7)
- KBH20 (96)
- KC250 (90)
- KC5010 (152)
- KC5025 (131)
- KC5410 (106)
- KC710 (91)
- KC720 (90)
- KC725M (2)
- KC730 (139)
- KC7310 (89)
- KC732 (90)
- KC8050 (90)
- KC810 (90)
- KC850 (110)
- KC9010 (90)
- KC9025 (90)
- KC910 (90)
- KC9105 (90)
- KC9110 (90)
- KC9120 (90)
- KC9125 (90)
- KC9225 (90)
- KC9240 (90)
- KC9240NEW (90)
- KC9315 (90)
- KC9320 (90)
- KC9325 (90)
- KC935 (92)
- KC950 (90)
- KC990 (90)
- KCD25 (90)
- KCK05 (94)
- KCK15 (100)
- KCK15B (96)
- KCK20 (106)
- KCK20B (97)
- KCM15 (95)
- KCM15B (94)
- KCM25 (102)
- KCM25B (98)
- KCM35 (1)
- KCP05 (93)
- KCP10 (99)
- KCP10B (101)
- KCP25 (113)
- KCP25B (111)
- KCP25C (135)
- KCP30 (91)
- KCPK05 (90)
- KCPK30 (2)
- KCS10 (105)
- KCS10B (105)
- KCU10 (126)
- KCU10B (154)
- KCU25 (113)
- KCU25B (145)
- KD050 (89)
- KD081 (2)
- KD100 (91)
- KD105 (89)
- KD120 (89)
- KD1400 (105)
- KD1405 (90)
- KD1425 (104)
- KT125 (90)
- KT150 (90)
- KT175 (90)
- KT315 (113)
- KTP10 (94)
- KU10 (90)
- KU10T (90)
- KU30T (90)
- SPM5F2 (2)
- SPMQMA (10)
Hand Of Tool
Hand Of Tool
- R (12)
Wiper Insert
Wiper Insert
- N (638)
- Y (31)
Drilling Condition Material
Drilling Condition Material
- H-All (16)
- K-All (179)
- M-All (247)
- N-All (33)
- P-All (159)
- S-All (230)
- S4 (1)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 4.0 mm(1)
- 6.0 mm(2)
- 8.5 mm(2)
- 11.0 mm(2)
- 13.5 mm(2)
- 16.0 mm(1)
- 19.0 mm(1)
- 22.0 mm(1)
- 25.0 mm(2)
- 25.5 mm(1)
- 29.5 mm(2)
- 33.5 mm(1)
- 34.0 mm(2)
- 40.5 mm(1)
- 42.0 mm(1)
- 43.0 mm(1)
- 45.5 mm(1)
- 47.0 mm(1)
- 49.0 mm(1)
- 50.0 mm(1)
- 52.0 mm(1)
- 56.5 mm(1)
- 60.0 mm(2)
- 61.0 mm(1)
- 65.0 mm(1)
- 97.0 mm(1)
- 100.0 mm(1)
- 103.5 mm(1)
- 110.0 mm(1)
- 138.0 mm(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.1575 in(1)
- 0.2362 in(2)
- 0.3346 in(1)
- 0.335 in(1)
- 0.4331 in(2)
- 0.5315 in(2)
- 0.6299 in(1)
- 0.748 in(1)
- 0.8661 in(1)
- 0.9843 in(2)
- 1.0039 in(1)
- 1.1614 in(2)
- 1.3189 in(1)
- 1.3386 in(2)
- 1.5945 in(1)
- 1.6535 in(1)
- 1.6929 in(1)
- 1.791 in(1)
- 1.8504 in(1)
- 1.9291 in(1)
- 1.9685 in(1)
- 2.0472 in(1)
- 2.2244 in(1)
- 2.3622 in(2)
- 2.4016 in(1)
- 2.5591 in(1)
- 3.82 in(1)
- 3.937 in(1)
- 4.0748 in(1)
- 4.3307 in(1)
- 5.43 in(1)
- 5.4331 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.2756 in(1)
- 0.3543 in(1)
- 0.374 in(1)
- 0.4528 in(1)
- 0.4724 in(1)
- 0.5512 in(1)
- 0.5709 in(1)
- 0.6496 in(1)
- 0.6693 in(1)
- 0.7677 in(1)
- 0.8858 in(1)
- 1.0039 in(1)
- 1.3189 in(1)
- 1.7126 in(1)
- 2.5591 in(1)
- 3.937 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 7.0 mm(1)
- 9.0 mm(1)
- 9.5 mm(1)
- 11.5 mm(1)
- 12.0 mm(1)
- 14.0 mm(1)
- 14.5 mm(1)
- 16.5 mm(1)
- 17.0 mm(1)
- 19.5 mm(1)
- 22.5 mm(1)
- 25.5 mm(1)
- 33.5 mm(1)
- 43.5 mm(1)
- 65.0 mm(1)
- 100.0 mm(1)
to
Cutting Direction
Cutting Direction
- B (2)
- E (10)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (11)
Maximum Bore Depth
Maximum Bore Depth
- 0.562 in(1)
- 0.803 in(1)
- 0.853 in(1)
- 1.042 in(1)
- 1.201 in(1)
- 1.279 in(1)
- 1.416 in(1)
- 1.516 in(1)
- 1.573 in(1)
- 2.1654 in(1)
- 2.3622 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 14.27 mm(1)
- 20.4 mm(1)
- 21.7 mm(1)
- 26.46 mm(1)
- 30.5 mm(1)
- 32.5 mm(1)
- 35.96 mm(1)
- 38.5 mm(1)
- 39.96 mm(1)
- 55.0 mm(1)
- 60.0 mm(2)
to
Boring Bar Material
Boring Bar Material
- S (4)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (470)
- T-TRIANGLE 60 (239)
Cartridge Size
Cartridge Size
- 1A. (1)
- 1B. (1)
- 1C. (1)
- 1D. (1)
- 1E. (1)
- 1F. (1)
- 1L. (1)
- 1W (1)
- 1X (1)
- 1Y (1)
- 2A. (1)
- 2B. (1)
- 2C. (1)
- 2D. (1)
- 2E. (1)
- 2F. (1)
- 2L. (3)
- 2W (1)
- 2X (1)
- 2Y (1)
- 3A. (1)
- 3B. (1)
- 3C. (1)
- 3D. (1)
- 3E. (1)
- 3F. (2)
- 3L. (1)
- 3W (1)
- 3X (1)
- 3Y (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.1378 in(1)
- 0.1772 in(1)
- 0.187 in(1)
- 0.2264 in(1)
- 0.2362 in(1)
- 0.2756 in(1)
- 0.2855 in(1)
- 0.3248 in(1)
- 0.3347 in(1)
- 0.3839 in(1)
- 0.4429 in(1)
- 0.502 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 3.5 mm(1)
- 4.5 mm(1)
- 4.75 mm(1)
- 5.75 mm(1)
- 6.0 mm(1)
- 7.0 mm(1)
- 7.25 mm(1)
- 8.25 mm(1)
- 8.5 mm(1)
- 9.75 mm(1)
- 11.25 mm(1)
- 12.75 mm(1)
to
Gage Length
Gage Length
- 0.4921 in(1)
- 0.8860 in(1)
- 1.2800 in(1)
- 1.6730 in(1)
- 1.8268 in(1)
- 1.9685 in(5)
- 2.0354 in(1)
- 2.3070 in(1)
- 2.3600 in(1)
- 2.9510 in(1)
- 2.9530 in(2)
- 3.1495 in(1)
- 3.3465 in(1)
- 3.3640 in(1)
- 3.5430 in(1)
- 3.7580 in(1)
- 3.9370 in(7)
- 4.3310 in(1)
- 4.8980 in(1)
- 5.9840 in(1)
Gage Length
Gage Length
- 12.5000 mm(1)
- 22.5000 mm(1)
- 32.5000 mm(1)
- 42.5000 mm(1)
- 46.4000 mm(1)
- 50.0000 mm(5)
- 51.7000 mm(1)
- 58.6000 mm(1)
- 60.0000 mm(1)
- 75.0000 mm(3)
- 80.0000 mm(1)
- 85.0000 mm(1)
- 85.4000 mm(1)
- 90.0000 mm(1)
- 95.4500 mm(1)
- 100.0000 mm(7)
- 110.0000 mm(1)
- 124.4000 mm(1)
- 152.0000 mm(1)
insertGeometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (423)
- T-TRIANGLE 60 (238)
Insert IC Size
Insert IC Size
- 3.975 mm(51)
- 5.55 mm(46)
- 6.35 mm(275)
- 9.525 mm(279)
- 12.7 mm(7)
to
Insert IC Size
Insert IC Size
- 0.156 in(51)
- 0.219 in(46)
- 0.25 in(275)
- 0.375 in(279)
- 0.5 in(7)
to
Cutting Edge Length
Cutting Edge Length
- 4.03 mm(51)
- 5.556 mm(5)
- 5.646 mm(12)
- 6.448 mm(128)
- 6.45 mm(36)
- 9.62 mm(4)
- 9.624 mm(8)
- 9.63 mm(17)
- 9.672 mm(189)
- 10.999 mm(38)
- 11.0 mm(73)
- 12.9 mm(2)
- 16.498 mm(42)
- 16.5 mm(48)
- 21.997 mm(5)
to
Cutting Edge Length
Cutting Edge Length
- 0.1587 in(11)
- 0.159 in(40)
- 0.2188 in(5)
- 0.2223 in(12)
- 0.2539 in(161)
- 0.254 in(3)
- 0.3789 in(8)
- 0.379 in(4)
- 0.3791 in(17)
- 0.3808 in(189)
- 0.433 in(41)
- 0.4331 in(70)
- 0.508 in(2)
- 0.6495 in(42)
- 0.6496 in(41)
- 0.65 in(7)
- 0.8661 in(5)
to
Chip Breaker CBMD
Chip Breaker CBMD
- FP (66)
- FW (25)
- HP (70)
- K (18)
- LF (263)
- MF (45)
- MP (21)
- UF (15)
Cutting Tool Material
Cutting Tool Material
- B H (54)
- B L (64)
- D P (76)
- H T (75)
- H W (642)
Tolerance Class
Tolerance Class
- G (262)
- H (51)
- M (345)
backEnd
Connection Type
Connection Type
- CYLINDRICAL (12)
System Size
System Size
- HSK100A (5)
- HSK63A (10)
- KM40TS (4)
- KM50 (2)
- KM50TS (6)
- KM63 (2)
- KM63TS (1)
- KM63XMZ (1)
- KM80 (1)
- KR32 (11)
- KR50 (6)
- KR63 (3)
- KR80 (3)
Back-End Diameter
Back-End Diameter
- 10.0 mm(5)
- 16.0 mm(10)
- 25.4 mm(1)
- 31.75 mm(2)
- 40.0 mm(4)
- 50.0 mm(8)
- 63.0 mm(14)
- 80.0 mm(1)
- 100.0 mm(5)
to
Back-End Diameter
Back-End Diameter
- 0.2478 in(5)
- 0.6299 in(3)
- 1.0 in(1)
- 1.25 in(2)
- 1.573 in(4)
- 1.967 in(5)
- 1.9685 in(3)
- 2.478 in(1)
- 2.4803 in(8)
- 3.1496 in(1)
- 3.937 in(5)
to
No filters matching ""
